160 Chemical Processing jobs in the United Arab Emirates

Job Description

PURPOSE & SCOPE: During tendering stage, responsible for the review of enquiry documentation and the Scope of Work, perform pre-bid engineering and provide required inputs for bid preparation. After award of Project, carry out allocated duties related to the preparation, and issue of Process & Safety deliverables. This responsibility includes site visits as required and close coordination with Lead Process Engineer, Project Engineering manager, Drafting Office Coordinator and occasionally with client's project team.

DUTIES & RESPONSIBILITIES:

1. Reports to H.O.D. (Process & Safety) and works under his overall supervision.
2. Reports to Lead Process/ Safety Engineer for day to day work.
3. During tendering stage, reviews enquiry documentation from client together with Scope of Work raises queries where there is lack of clarity, interfaces with other disciplines to ensure integration of activities and finally provide Process inputs during bid preparation.
4. For projects awarded to NPCC, perform as under:
5. Perform Site Visits for data collection / verification.
6. Develop Process Design Basis based on scope of work, subsequent client's clarifications and site visit.
7. Perform Process simulation and develop Heat & Mass Balance as required.
8. Perform Pipeline hydraulics.
9. Perform Flare hydraulics.
10. Perform Fire water networking.
11. Perform Equipment/Instrument sizing calculations.
12. Prepares Process Flow Diagrams, P&IDs, Process data sheets, and other Process deliverables.
13. Prepares Operating Manual and provide support during commissioning and performance run.
14. Coordinates with the Drafting Office Coordinator for the checking and issuing of drawings.
15. Provides input for the development of the Planning Package and project progress reporting.
16. Receives “as built” information from the Project Management Team, reviews content and, if satisfied, passes to drafting for production of drawings.
17. Trains Entry Level Engineers.
18. Compliance in accordance with HSE standard.

Skills Required

MINIMUM REQUIREMENTS:

1. B.Sc. in Chemical Engineering from a reputed institute.
2. Minimum of 3 years experience in the oil and gas plants Design and Engineering.
3. Extensive Knowledge and expertise in Process Simulation. Have good working experience with common process softwares like HYSIS, PIPESIM, PIPEPHASE; FLARESIM, PHAST PROFESSIONAL.,SAFETI etc.
4. Proven skills in routine process calculations and use of process software and in-house developed spreadsheets.
5. Good knowledge of relevant engineering codes and standards.
6. Good command of written and spoken English and report writing.
7. Good interpersonal relationship.
8. Should be familiar with routine safety studies like HAZOP, HAZID, and SIMOPS etc.

Job Description

PURPOSE & SCOPE: During tendering stage, responsible for the review of enquiry documentation and the Scope of Work, perform pre-bid engineering and provide required inputs for bid preparation. After award of Project, carry out allocated duties related to the preparation, and issue of Process & Safety deliverables. This responsibility includes site visits as required and close coordination with Lead Process Engineer, Project Engineering manager, Drafting Office Coordinator and occasionally with client's project team.

DUTIES & RESPONSIBILITIES:

• Reports to H.O.D. (Process & Safety) and works under his overall supervision.
• Reports to Lead Process/ Safety Engineer for day to day work.
• During tendering stage, reviews enquiry documentation from client together with Scope of Work raises queries where there is lack of clarity, interfaces with other disciplines to ensure integration of activities and finally provide Process inputs during bid preparation.
• For projects awarded to NPCC, perform as under:
• Perform Site Visits for data collection / verification.
• Develop Process Design Basis based on scope of work, subsequent client's clarifications and site visit.
• Perform Process simulation and develop Heat & Mass Balance as required.
• Perform Pipeline hydraulics.
• Perform Flare hydraulics.
• Perform Fire water networking.
• Perform Equipment/Instrument sizing calculations.
• Prepares Process Flow Diagrams, P&IDs, Process data sheets, and other Process deliverables.
• Prepares Operating Manual and provide support during commissioning and performance run.
• Coordinates with the Drafting Office Coordinator for the checking and issuing of drawings.
• Provides input for the development of the Planning Package and project progress reporting.
• Receives “as built” information from the Project Management Team, reviews content and, if satisfied, passes to drafting for production of drawings.
• Trains Entry Level Engineers.
• Compliance in accordance with HSE standard.

Skills Required

MINIMUM REQUIREMENTS:

• B.Sc. in Chemical Engineering from a reputed institute.
• Minimum of 3 years experience in the oil and gas plants Design and Engineering.
• Extensive Knowledge and expertise in Process Simulation. Have good working experience with common process softwares like HYSIS, PIPESIM, PIPEPHASE; FLARESIM, PHAST PROFESSIONAL.,SAFETI etc.
• Proven skills in routine process calculations and use of process software and in-house developed spreadsheets.
• Good knowledge of relevant engineering codes and standards.
• Good command of written and spoken English and report writing.
• Good interpersonal relationship.
• Should be familiar with routine safety studies like HAZOP, HAZID, and SIMOPS etc.

Process Engineer

• Carry out process engineering work on assigned projects under the supervision of the Lead Process Engineer.

• Typically 10-15 years of experience in oil and gas, preferably with offshore wellhead/process platform experience.
• Knowledge of process engineering design, including understanding process descriptions, data sheets, PFDs, and P&IDs.
• Perform process simulations using Hysys / Unisim and flare load calculations with Aspen Flarenet.
• Familiarize with the scope of work, monitor changes, and raise change notifications as needed.
• Coordinate with PMT and other discipline engineers as directed by the Lead Engineer.
• Prepare and check key deliverables such as:

• Process simulations, heat and material balances.
• Process design basis documentation.
• Piping and Instrument Diagrams (P&IDs).
• Safety charts and process safeguarding diagrams.
• Operating philosophy and manuals.
• Equipment and instrument datasheets.
• Equipment and line lists.
• Flare radiation and dispersion calculations.
• Depressurization and flare network studies.
• Equipment and line sizing calculations.
• Fluid lists.

Assist the Lead Process Engineer in IDC activities and liaise with drafting teams for drawing development.

Bachelor of Technology/Engineering(Chemical, Mechanical)

Nationality

Any Nationality

Any

Vacancy

1 Vacancy

Job Description

The role of the Process Engineer/Safety Coordinator is to evaluate processes and to configure manufacturing systems to reduce cost, improve sustainability and develop best practices within the production process. The focus of the role is to maintain reliable and safe manufacturing systems as well as manage capital equipment projects using both internal and external resources. The successful candidate will be a skilled, energetic, and devoted engineer who is interested in being involved hands on in the day-to-day manufacturing process. They will be a key member of the facility management team reporting to the Plant Manager, providing support/direction of the manufacturing process and equipment decisions

The role is a permanent placement; travel to other sites in North America, India, and Middle East may be required. The candidate must not have any restrictions for work placements in the UAE.

Safety and Environmental

· Manage plant Environmental, health, and safety programs. Ensure ISO 14001 and ISO 45001 certifications are maintained.

· Ensures Plant EHS scorecard and safety training records are maintained and up to date.

· Develop and maintain safety standards to conform to industry standards and federal, state and local regulations.

· Understand the importance of safety in manufacturing. Safety always comes first.

· Understand the importance of minimizing environmental impacts in the processing and manufacturing of plastic. Always strive to minimize wastes and spills when designing equipment.

Process Design

· Facilitating all aspects of process engineering for new and existing products from feasibility testing to process automation.

· Developing chain of tasks for process, establishing method of production & process directives, resolving problems / bottlenecks. Providing analysis of data and generating required compliance documentation.

· Discovering, investigating and integrating new technologies in the processing area.

· Process engineering calculations - material and energy balances, strength of material, etc.

· Implementing statistical tools for process control & designing DOE (Design of Experiments).

· Preparing Process Flow Diagrams (PFD), Process and Instrumentation Diagrams (P&ID) etc.

· Optimizes Production Rate and Quality and Safety by eliminating bottlenecks in the grinding and extrusion process.

· Evaluates efficiency and capacity and safety of process equipment of extrusion and size reduction systems to identify limitations and bottlenecks.

· Minimize reliance on operator human skill and experience.

· Reviews processing performance with plant management team daily. Make recommendations to production department.

Job Qualifications:

· Minimum Bachelor’s Degree, preferably in Mechanical or Chemical engineering.

· 3-5 years of Process Engineering experience.

· Strong background PLC controls, working knowledge on electrical schematics and automation design

· Experience in equipment troubleshooting, process optimization and production controls such as SPC and DCS.

· Strong mechanical aptitude with high interest in working in a manufacturing environment.

· Willingness to get involved in the production operation at all levels.

· Must have experience in managing ISO14001 and 45001 management system, and certified internal auditor.

· Ability to work in a multitasking, multi-role and fast paced environment.

· Must be proficient in Microsoft Office including VBA and macros, AutoCAD, PLC controls and programming software, SolidWorks experience would be an asset.

· Strong customer/vendor interaction and interpersonal skills.

· Willing to occasionally, as needed, work outside of normal business hours to troubleshoot problems and facilitate projects.

· Experience in plastics manufacturing, especially extrusion, equipment design, process development, and polymer science is preferred.

Disclaimer: Naukrigulf.com is only a platform to bring jobseekers & employers together. Applicants are advised to research the bonafides of the prospective employer independently. We do NOT endorse any requests for money payments and strictly advice against sharing personal or bank related information. We also recommend you visit Security Advice for more information. If you suspect any fraud or malpractice, email us at

Ingenia Polymers Chemical Industries LLC

Ingenia Polymers is a premier integrated solutions provider to the global polymers industry. For more than 35 years, Ingenia Polymers has developed a record of service, growth and reliability unsurpassed in the industry. Our talented people, culture of operational excellence, relentless drive to advance technology and breadth of capabilities make us the preferred supplier to our customers, with value added products and services supporting a variety of markets the world over. Ingenia Polymers is seeking highly capable and motivated people to contribute to our ongoing success and grow with us as we continue our international expansion. This is a great opportunity for individuals who want to take their career to the next level by joining a high-growth company with sophisticated production facilities, leading edge manufacturing technologies and innovative, progressive people.

Ingenia Polymers Chemical Industries LLC

Ingenia Polymers is a premier integrated solutions provider to the global polymers industry. For more than 35 years, Ingenia Polymers has developed a record of service, growth and reliability unsurpassed in the industry. Our talented people, culture of operational excellence, relentless drive to advance technology and breadth of capabilities make us the preferred supplier to our customers, with value added products and services supporting a variety of markets the world over. Ingenia Polymers is seeking highly capable and motivated people to contribute to our ongoing success and grow with us as we continue our international expansion. This is a great opportunity for individuals who want to take their career to the next level by joining a high-growth company with sophisticated production facilities, leading edge manufacturing technologies and innovative, progressive people.

Christine Lumabi

ICAD 1, Musaffah, Abu Dhabi, United Arab Emirates

• Design of water and wastewater treatment plants sludge treatment facilities and odour control units
• Review process design submittals
• Review material submittals related to process
• Participate in tender preparation
• Travel across GCC and middle east (when needed) for meetings site visits inspections etc.
• Manage junior engineers

Qualifications :

• BSc. in Chemical Engineering MSC. in Chemical Engineering is a plus.
• 10Years of experience in the design of the following:
  • Domestic wastewater treatment plants
  • Industrial wastewater treatment plants
  • Desalination plants
  • Sludge dewatering drying and treatment facilities
  • Odour control units
• Experience in running Biowin Model
• Experience in running RO membrane projections using any of the available software

Remote Work :

No

Employment Type :

Full-time

ISS International S.p.A. is looking for a Process Engineer to be involved in an Asset Integrity project in Abu Dhabi within the Oil & Gas industry.

The project aims to upgrade an Enterprise Asset Management (EAM) system for Oil & Gas fields and terminals.

Requirements:

• Degree in Chemical or Process Engineering
• Minimum 10 years of experience as a Process Engineer including at least 6 years in the Oil & Gas sector
• 34 years of experience in reliability and/or maintenance projects

Additional details:

• Location: Abu Dhabi UAE
• Start Date: October 2025
• Duration: 6 months with possible extension
• Working Schedule: 48 hours/week
• Rotation: Resident

If you are interested please apply or feel free to share this opportunity within your network.

#ProcessEngineer #OilAndGasJobs #EngineeringJobs #EAM #AssetIntegrity #MaintenanceEngineering #ReliabilityEngineering #JobOpportunity #AbuDhabiJobs #ISSInternational #HiringNow

• Ensure accuracy of designs and costings.
• Define and verify scope accurately.
• Manage scope gaps effectively.
• Deliver proposals within agreed timelines.
• Handle multiple proposals simultaneously.
• Facilitate design recycle and fast turnaround processes.
• Achieve contractual performance targets.
• Manage scope changes and gaps proficiently.
• Deliver designs on schedule.
• Manage multiple proposals and contracts.
• Support and deliver client-facing presentations and justify design costs.
• Manage relationships with suppliers and contractors.

The Process/Project Engineer (Pre-Sales & Execution), reporting to the Director of Service, is responsible for producing designs, technical and commercial proposals, and supporting project execution from detailed designs through commissioning. The engineer will also manage small projects independently or jointly with senior engineers, centers of competence, or project managers.

• Liaise with sales and senior engineering teams to translate client requirements into technical solutions.
• Perform process, equipment, and piping sizing.
• Develop enquiry stage P&IDs.
• Develop key assumptions, execution plans, and scope boundaries.
• Cost equipment and component supply.
• Review enquiry documents with multiple functions and seek clarifications as needed.
• Support various functions in preparing scope and costings.
• Consolidate costs and prepare overall cost calculations.
• Develop comprehensive execution plans and timelines.
• Prepare technical and commercial proposals aligned with defined scopes of supply.
• Maintain proposal documentation according to company procedures and standards.
• Report daily to the Service Director.
• Support project managers and senior engineers in project activities.
• Assist with change control and scope variations.
• Collaborate with senior engineers to produce designs for P&IDs, equipment lists, datasheets, and process descriptions.
• Request quotations from suppliers, review bids, and clarify as needed.
• Perform supplier bid analysis and recommend vendors.
• Review design documents with senior engineers.
• Participate in commissioning, testing, and initial production support.
• Maintain project documentation to ensure compliance with standards.
• Seek guidance from project managers and senior engineers when unsure.

This role involves extensive travel, primarily in the Middle East, with occasional worldwide travel.

We are seeking a highly motivated and enthusiastic individual to join our team as a Chemical Process Developer.

This is an excellent opportunity for freshers to kickstart their career in the field of chemical engineering. As a Chemical Process Developer, you will be responsible for designing, developing, and implementing chemical processes and equipment for production facilities. Your main goal will be to ensure that manufacturing processes run efficiently, safely, and in compliance with all relevant regulations.

Your key responsibilities will include:

• Conducting research and analysis to develop new chemical processes or improve existing ones
• Designing equipment and processes for large-scale production of chemicals
• Evaluating the effectiveness of current production processes and recommending improvements
• Troubleshooting any issues that arise during production and implementing solutions
• Collaborating with other engineers and technicians to ensure smooth operation of production facilities
• Monitoring process parameters and making adjustments as needed to maintain quality standards
• Staying up-to-date with industry trends and advancements in technology to continuously improve processes

Requirements:
- Bachelor's degree in Chemical Engineering or a related field from a reputable university (candidates without experience will be considered)
- Strong understanding of chemical engineering principles and processes
- Proficient in using computer software for process design and analysis
- Excellent analytical and problem-solving skills
- Good communication skills to effectively collaborate with team members from diverse backgrounds
- Ability to handle multiple tasks efficiently under tight deadlines

The ideal candidate will have:

• A strong foundation in chemical engineering principles and processes
• Excellent analytical and problem-solving skills
• Proficiency in using computer software for process design and analysis
• Good communication skills to effectively collaborate with team members
• Ability to handle multiple tasks efficiently under tight deadlines

We offer a competitive salary package based on qualifications and experience, health insurance coverage, annual leave, and opportunities for professional growth within the company.

Please note that this position is open only for Indian nationals who possess their own visa. Accommodation will not be provided by the company.

Join to apply for the Process Engineer - LPT Middle East role at GEA Group.

This position involves managing proposals and contracts, supporting client presentations, and managing suppliers and contractors.

• Ensure accuracy of designs and costings
• Manage scope and scope gaps
• Deliver proposals on time
• Design recycle and fast turnaround
• Achieve contractual performance
• Manage scope, changes, and gaps
• Support client-facing presentations and design-cost justifications
• Manage suppliers and contractors
• Set service budget for Middle East region

The candidate will report to the Director of Service, responsible for design, proposals, and project support from detailed design to commissioning. Small projects may be run under supervision or with senior engineers.

• Collaborate with sales and engineering teams to translate client requirements into technical solutions
• Process and size equipment and piping
• Develop enquiry stage P&IDs and scope boundaries
• Cost equipment and components
• Review enquiry documents and clarify as needed
• Prepare scope and costings with multiple functions
• Consolidate costs and develop overall plans and timelines
• Prepare technical and commercial proposals
• Maintain proposal documentation
• Report daily to the Service Director

• Support project activities and change control
• Design P&IDs, equipment lists, datasheets, and process descriptions
• Request quotations, review bids, and recommend vendors
• Review design documents
• Participate in commissioning and initial production support
• Maintain project documentation
• Seek guidance from project managers and senior engineers as needed

This role involves extensive travel mainly in the Middle East, with potential international travel.

If interested, please click apply to start the guided application process.