114 Chemical Operations jobs in the United Arab Emirates

As a key member of our manufacturing team, you will play a pivotal role in ensuring the seamless and efficient operation of production processes. Your leadership skills and attention to detail will be essential in driving productivity and ensuring that production goals are met within set timelines.

Responsibilities:

• Oversee daily production activities to ensure compliance with manufacturing standards.
• Coordinate and assign tasks to production staff to optimize productivity and workflow.
• Ensure all equipment is operating safely and efficiently to prevent downtime.
• Monitor inventory levels and coordinate supply chain activities for continuity.
• Implement and enforce safety policies to maintain a secure working environment.
• Conduct frequent inspections to ensure quality control standards are met.
• Provide training and guidance to employees to improve skills and performance.
• Prepare and maintain production reports, documenting daily operations and issues.
• Communicate effectively with upper management regarding production status and challenges.
• Develop and implement strategies for cost reduction and efficiency improvement.
• Support new product introductions and project initiatives as required.
• Resolve any production-related issues promptly to minimize impact on deadlines.

Requirements:

• Proven experience in a supervisory role within a manufacturing environment.
• Strong understanding of production processes and quality control standards.
• Excellent leadership and team management skills to motivate staff effectively.
• Ability to analyze production metrics and implement improvement strategies.
• Good communication skills to interact with staff and management effectively.
• Knowledge of health and safety regulations applicable to manufacturing settings.
• Proficient in using production management and reporting software tools.

Job Details:

• Role Level: Mid-Level
• Work Type: Full-Time
• Country: United Arab Emirates
• City: Abu Dhabi

At our organization, we are seeking a highly skilled and experienced Senior Production Executive to lead and manage end-to-end manufacturing operations of a pallet production unit. This is a dynamic role that requires operational excellence, cost efficiency, and compliance with safety/quality standards.

• Operational Leadership: Oversee the establishment of the pallet manufacturing unit, including site setup, equipment procurement, and workforce planning.
• Strategic & Commercial Excellence: Develop and execute strategic plans to enhance productivity, scalability, and profitability.
• Team & Culture Development: Lead, mentor, and train production staff to foster a high-performance culture.

• Bachelor's degree in Engineering, Business, or related field.
• 5 years in manufacturing operations of pallets or related industries preferred, with exposure to commercial/strategic roles.
• Familiarity with QMS (ISO/SPC), supply chain, and lean manufacturing principles.
• Proficiency in MS Office and production management tools.
• Strong leadership and stress tolerance with experience in green field projects.

• Innovative Products: Represent a company committed to sustainability and innovation in manufacturing.
• Career Growth: Be part of an ambitious team with opportunities for professional development and advancement.
• Dynamic Environment: Work in a fast-paced results-driven organization with a customer-focused culture.

Job Title: Welding Manager - Manufacturing Operations Ajman

Role Summary:

AL Fan Emirates is hiring a full-time Welding Manager to lead our welding operations at our facility in Ajman, United Arab Emirates. This on-site role is ideal for a certified welding professional with strong managerial experience, quality control expertise, and hands-on proficiency in both standard and TIG welding techniques. The successful candidate will ensure compliance with safety standards and oversee day-to-day welding activities within a high-performance manufacturing environment.

Job Details:

• Location: Ajman, UAE
• Industry: Manufacturing
• Function: Plant / Facilities Management
• Salary: 7000 - 1000 AED monthly (Market estimated)
• Gender: Any
• Candidate Nationality: Any
• Preferred Current Location: UAE
• Job Type: Full Time

Key Responsibilities:

• Lead, supervise, and schedule daily operations of the welding department
• Oversee all welding tasks including MIG, TIG, and arc welding
• Conduct inspections and ensure all welds meet quality and safety standards
• Maintain proper documentation for welding procedures and quality checks
• Train and mentor welding staff, promoting skill development and safety practices
• Coordinate with production and maintenance teams for seamless workflow
• Ensure compliance with relevant welding codes and industry regulations
• Develop and implement productivity improvement strategies
• Prepare periodic reports for management regarding project status and resource needs
• Maintain an organized and safe work environment in accordance with company policy

Candidate Requirements:

• Bachelor's degree (required)
• Minimum 2 years of managerial experience in a welding or industrial environment
• At least 2 years of hands-on welding experience including TIG welding
• Proficiency in welding inspection and quality control
• Fluency in Hindi, Urdu, and English (required)
• Strong leadership, communication, and organizational skills
• Certification in welding and quality control preferred
• Manufacturing or construction industry background is a plus

Why Join Us:

• Be part of a growing UAE retail brand with in-house manufacturing operations
• Hands-on leadership role with potential for career advancement
• Supportive team culture with focus on innovation and productivity
• Opportunity to influence safety, quality, and operational efficiency

About the Company:

AL Fan Emirates is a fast-growing retail chain with five branches across the UAE, known for offering high-quality fashion, household essentials, and lifestyle products at competitive prices. With an agile approach to market trends and an emphasis on operational excellence, we continue to expand our footprint across the Emirates while maintaining a strong focus on product quality and customer satisfaction.

Note: Employers can post jobs free in Dubai, Abu Dhabi, and the wider UAE region through our platform.

To apply please click here: 

The company has been operating for over 30 years, manufacturing and supplying wood and metal-based furniture across commercial, industrial, educational, and hospitality sectors.

A work permit and sponsorship are available for this position.

Package

Responsibilities

Education:

Experience:

Skills Provision is an ethical international recruitment agency, as such our adverts do not discriminate with regards to age, race, gender, colour, creed, religion, sexual orientation, disability and nationality.

• Manage the TM/production department and all support staff in logistics centers within our territories, ensuring proper duty distribution and delegation.
• Develop and execute corporate strategies for the TM/production department and logistics centers, aligning with company objectives.
• Foster effective communication between the corporate TM/production department and logistics centers through ERP and regular reporting.
• Review and approve equipment requests/PIDs from operations.
• Ensure proper resource allocation for tool preparation projects based on agreed schedules.
• Maintain ILI tool fleet in current build state.
• Direct Ops Asset, Production, Supply Chain managers, and Ops Asset representatives to ensure technical requirements are met during planning and preparation phases.
• Control quality of tool preparation project deliverables with supporting managers and quality control representatives.
• Coordinate with other departments to facilitate execution of the operations project plan with manager support.

• Bachelor's degree in engineering or equivalent industrial experience.
• Over 7 years of experience in the pipeline environment, ideally covering projects such as Pipeline Inspection, Integrity, Pigging, Cleaning, Freezing, Hydro-testing.
• Fluent English written and oral skills.
• Experience managing a large, motivated team and overseeing operations.

• Ability to travel without major visa restrictions.
• Readiness for frequent business trips around the world.

• Lifting and carrying up to 50 pounds.
• Mobility: able to walk and climb to perform duties in a refinery or plant environment.
• Communication: sufficient clarity of speech and hearing to communicate effectively.
• Focus and multitasking: ability to maintain focus and multitask effectively.

Job Description

PURPOSE & SCOPE: During tendering stage, responsible for the review of enquiry documentation and the Scope of Work, perform pre-bid engineering and provide required inputs for bid preparation. After award of Project, carry out allocated duties related to the preparation, and issue of Process & Safety deliverables. This responsibility includes site visits as required and close coordination with Lead Process Engineer, Project Engineering manager, Drafting Office Coordinator and occasionally with client's project team.

DUTIES & RESPONSIBILITIES:

1. Reports to H.O.D. (Process & Safety) and works under his overall supervision.
2. Reports to Lead Process/ Safety Engineer for day to day work.
3. During tendering stage, reviews enquiry documentation from client together with Scope of Work raises queries where there is lack of clarity, interfaces with other disciplines to ensure integration of activities and finally provide Process inputs during bid preparation.
4. For projects awarded to NPCC, perform as under:
5. Perform Site Visits for data collection / verification.
6. Develop Process Design Basis based on scope of work, subsequent client's clarifications and site visit.
7. Perform Process simulation and develop Heat & Mass Balance as required.
8. Perform Pipeline hydraulics.
9. Perform Flare hydraulics.
10. Perform Fire water networking.
11. Perform Equipment/Instrument sizing calculations.
12. Prepares Process Flow Diagrams, P&IDs, Process data sheets, and other Process deliverables.
13. Prepares Operating Manual and provide support during commissioning and performance run.
14. Coordinates with the Drafting Office Coordinator for the checking and issuing of drawings.
15. Provides input for the development of the Planning Package and project progress reporting.
16. Receives “as built” information from the Project Management Team, reviews content and, if satisfied, passes to drafting for production of drawings.
17. Trains Entry Level Engineers.
18. Compliance in accordance with HSE standard.

Skills Required

MINIMUM REQUIREMENTS:

1. B.Sc. in Chemical Engineering from a reputed institute.
2. Minimum of 3 years experience in the oil and gas plants Design and Engineering.
3. Extensive Knowledge and expertise in Process Simulation. Have good working experience with common process softwares like HYSIS, PIPESIM, PIPEPHASE; FLARESIM, PHAST PROFESSIONAL.,SAFETI etc.
4. Proven skills in routine process calculations and use of process software and in-house developed spreadsheets.
5. Good knowledge of relevant engineering codes and standards.
6. Good command of written and spoken English and report writing.
7. Good interpersonal relationship.
8. Should be familiar with routine safety studies like HAZOP, HAZID, and SIMOPS etc.

Job Description

PURPOSE & SCOPE: During tendering stage, responsible for the review of enquiry documentation and the Scope of Work, perform pre-bid engineering and provide required inputs for bid preparation. After award of Project, carry out allocated duties related to the preparation, and issue of Process & Safety deliverables. This responsibility includes site visits as required and close coordination with Lead Process Engineer, Project Engineering manager, Drafting Office Coordinator and occasionally with client's project team.

DUTIES & RESPONSIBILITIES:

• Reports to H.O.D. (Process & Safety) and works under his overall supervision.
• Reports to Lead Process/ Safety Engineer for day to day work.
• During tendering stage, reviews enquiry documentation from client together with Scope of Work raises queries where there is lack of clarity, interfaces with other disciplines to ensure integration of activities and finally provide Process inputs during bid preparation.
• For projects awarded to NPCC, perform as under:
• Perform Site Visits for data collection / verification.
• Develop Process Design Basis based on scope of work, subsequent client's clarifications and site visit.
• Perform Process simulation and develop Heat & Mass Balance as required.
• Perform Pipeline hydraulics.
• Perform Flare hydraulics.
• Perform Fire water networking.
• Perform Equipment/Instrument sizing calculations.
• Prepares Process Flow Diagrams, P&IDs, Process data sheets, and other Process deliverables.
• Prepares Operating Manual and provide support during commissioning and performance run.
• Coordinates with the Drafting Office Coordinator for the checking and issuing of drawings.
• Provides input for the development of the Planning Package and project progress reporting.
• Receives “as built” information from the Project Management Team, reviews content and, if satisfied, passes to drafting for production of drawings.
• Trains Entry Level Engineers.
• Compliance in accordance with HSE standard.

Skills Required

MINIMUM REQUIREMENTS:

• B.Sc. in Chemical Engineering from a reputed institute.
• Minimum of 3 years experience in the oil and gas plants Design and Engineering.
• Extensive Knowledge and expertise in Process Simulation. Have good working experience with common process softwares like HYSIS, PIPESIM, PIPEPHASE; FLARESIM, PHAST PROFESSIONAL.,SAFETI etc.
• Proven skills in routine process calculations and use of process software and in-house developed spreadsheets.
• Good knowledge of relevant engineering codes and standards.
• Good command of written and spoken English and report writing.
• Good interpersonal relationship.
• Should be familiar with routine safety studies like HAZOP, HAZID, and SIMOPS etc.

Process Engineer

• Carry out process engineering work on assigned projects under the supervision of the Lead Process Engineer.

• Typically 10-15 years of experience in oil and gas, preferably with offshore wellhead/process platform experience.
• Knowledge of process engineering design, including understanding process descriptions, data sheets, PFDs, and P&IDs.
• Perform process simulations using Hysys / Unisim and flare load calculations with Aspen Flarenet.
• Familiarize with the scope of work, monitor changes, and raise change notifications as needed.
• Coordinate with PMT and other discipline engineers as directed by the Lead Engineer.
• Prepare and check key deliverables such as:

• Process simulations, heat and material balances.
• Process design basis documentation.
• Piping and Instrument Diagrams (P&IDs).
• Safety charts and process safeguarding diagrams.
• Operating philosophy and manuals.
• Equipment and instrument datasheets.
• Equipment and line lists.
• Flare radiation and dispersion calculations.
• Depressurization and flare network studies.
• Equipment and line sizing calculations.
• Fluid lists.

Assist the Lead Process Engineer in IDC activities and liaise with drafting teams for drawing development.

Bachelor of Technology/Engineering(Chemical, Mechanical)

Nationality

Any Nationality

Any

Vacancy

1 Vacancy

Job Description

The role of the Process Engineer/Safety Coordinator is to evaluate processes and to configure manufacturing systems to reduce cost, improve sustainability and develop best practices within the production process. The focus of the role is to maintain reliable and safe manufacturing systems as well as manage capital equipment projects using both internal and external resources. The successful candidate will be a skilled, energetic, and devoted engineer who is interested in being involved hands on in the day-to-day manufacturing process. They will be a key member of the facility management team reporting to the Plant Manager, providing support/direction of the manufacturing process and equipment decisions

The role is a permanent placement; travel to other sites in North America, India, and Middle East may be required. The candidate must not have any restrictions for work placements in the UAE.

Safety and Environmental

· Manage plant Environmental, health, and safety programs. Ensure ISO 14001 and ISO 45001 certifications are maintained.

· Ensures Plant EHS scorecard and safety training records are maintained and up to date.

· Develop and maintain safety standards to conform to industry standards and federal, state and local regulations.

· Understand the importance of safety in manufacturing. Safety always comes first.

· Understand the importance of minimizing environmental impacts in the processing and manufacturing of plastic. Always strive to minimize wastes and spills when designing equipment.

Process Design

· Facilitating all aspects of process engineering for new and existing products from feasibility testing to process automation.

· Developing chain of tasks for process, establishing method of production & process directives, resolving problems / bottlenecks. Providing analysis of data and generating required compliance documentation.

· Discovering, investigating and integrating new technologies in the processing area.

· Process engineering calculations - material and energy balances, strength of material, etc.

· Implementing statistical tools for process control & designing DOE (Design of Experiments).

· Preparing Process Flow Diagrams (PFD), Process and Instrumentation Diagrams (P&ID) etc.

· Optimizes Production Rate and Quality and Safety by eliminating bottlenecks in the grinding and extrusion process.

· Evaluates efficiency and capacity and safety of process equipment of extrusion and size reduction systems to identify limitations and bottlenecks.

· Minimize reliance on operator human skill and experience.

· Reviews processing performance with plant management team daily. Make recommendations to production department.

Job Qualifications:

· Minimum Bachelor’s Degree, preferably in Mechanical or Chemical engineering.

· 3-5 years of Process Engineering experience.

· Strong background PLC controls, working knowledge on electrical schematics and automation design

· Experience in equipment troubleshooting, process optimization and production controls such as SPC and DCS.

· Strong mechanical aptitude with high interest in working in a manufacturing environment.

· Willingness to get involved in the production operation at all levels.

· Must have experience in managing ISO14001 and 45001 management system, and certified internal auditor.

· Ability to work in a multitasking, multi-role and fast paced environment.

· Must be proficient in Microsoft Office including VBA and macros, AutoCAD, PLC controls and programming software, SolidWorks experience would be an asset.

· Strong customer/vendor interaction and interpersonal skills.

· Willing to occasionally, as needed, work outside of normal business hours to troubleshoot problems and facilitate projects.

· Experience in plastics manufacturing, especially extrusion, equipment design, process development, and polymer science is preferred.

Disclaimer: Naukrigulf.com is only a platform to bring jobseekers & employers together. Applicants are advised to research the bonafides of the prospective employer independently. We do NOT endorse any requests for money payments and strictly advice against sharing personal or bank related information. We also recommend you visit Security Advice for more information. If you suspect any fraud or malpractice, email us at

Ingenia Polymers Chemical Industries LLC

Ingenia Polymers is a premier integrated solutions provider to the global polymers industry. For more than 35 years, Ingenia Polymers has developed a record of service, growth and reliability unsurpassed in the industry. Our talented people, culture of operational excellence, relentless drive to advance technology and breadth of capabilities make us the preferred supplier to our customers, with value added products and services supporting a variety of markets the world over. Ingenia Polymers is seeking highly capable and motivated people to contribute to our ongoing success and grow with us as we continue our international expansion. This is a great opportunity for individuals who want to take their career to the next level by joining a high-growth company with sophisticated production facilities, leading edge manufacturing technologies and innovative, progressive people.

Ingenia Polymers Chemical Industries LLC

Ingenia Polymers is a premier integrated solutions provider to the global polymers industry. For more than 35 years, Ingenia Polymers has developed a record of service, growth and reliability unsurpassed in the industry. Our talented people, culture of operational excellence, relentless drive to advance technology and breadth of capabilities make us the preferred supplier to our customers, with value added products and services supporting a variety of markets the world over. Ingenia Polymers is seeking highly capable and motivated people to contribute to our ongoing success and grow with us as we continue our international expansion. This is a great opportunity for individuals who want to take their career to the next level by joining a high-growth company with sophisticated production facilities, leading edge manufacturing technologies and innovative, progressive people.

Christine Lumabi

ICAD 1, Musaffah, Abu Dhabi, United Arab Emirates