209 Control Systems Engineer jobs in the United Arab Emirates

Control Systems Engineer

AED120000 - AED250000 Y Global Projects Services AG

Posted today

Job Viewed

Tap Again To Close

Job Description

Company
: Saipem

Job Title:
Control Systems Engineer

Location:
Offshore (rotation basis on board Saipem vessel)

About Us
Saipem is a global leader in engineering services for the design, construction and operation of complex infrastructures and plants in the energy sector, both offshore and onshore.

With our five business lines - Asset Based Services, Energy Carriers, Offshore Wind, Sustainable Infrastructures, Robotics & Industrialized Solutions - we are One Company present in around 60 countries with over 30,000 employees of more than 130 nationalities, providing the world the innovative excellence of our people and our partners for over 65 years.

Mission

  • Execute engineering tasks related to Control and Telecommunication Systems under the supervision of the Instrumentation Discipline Lead.
  • Ensure design compliance with technical requirements, safety standards, and quality expectations.
  • Coordinate with project stakeholders and oversee technical activities carried out internally or by subcontractors to ensure seamless system integration and commissioning.

Key Responsibilities

  • Development of Technology Know-How and Commercial Support
  • Contribute to the development of internal technological expertise for control systems.
  • Support commercial efforts by providing control system input for proposals and technical clarifications.
  • Feasibility Studies
  • Assist in the evaluation of technical feasibility for new projects or modifications, ensuring compliance with engineering standards.
  • Bidding Phase / Commercial Proposal Development
  • Estimate quantities and scope for Control Systems to support cost and erection works evaluation.
  • Collaborate with the Discipline Lead to define man-hour budgets and cost estimates for project proposals.
  • Project Execution
  • Review client technical documentation and project specifications.
  • Coordinate and review subcontracted engineering activities and ensure proper documentation flow and quality.
  • Define engineering design criteria, technical procedures, and system architecture.
  • Prepare and validate material and service requisitions for Control and Safety Systems.
  • Optimize system design for cost-efficiency while maintaining functional integrity and safety.
  • Prepare supply specifications for control, safety, advanced control, dynamic simulation, and operator training systems.
  • Contribute to P&ID mechanization and ensure control strategy alignment.
  • Validate Vendor documentation (functional specs, detail design, BOQs).
  • Coordinate detail engineering work and ensure accurate installation drawing preparation.
  • Participate in Factory Acceptance Tests (FAT) at Vendor facilities.
  • Construction and Start-Up
  • Participate in Site Acceptance Tests (SAT), loop checks, and functional checks offshore.
  • Provide on-site technical and engineering support during construction and commissioning.
  • Perform site-based engineering adjustments and optimizations as required.

Required Technical Skills

  • Proficiency above basic level in:

  • Visual Studio (C++)

  • Python
  • Object-Oriented Programming (OOP)
  • Siemens TIA Portal
  • Siemens WinCC
  • RSLogix 5000
  • SCADA systems
  • Microsoft Excel (Advanced)

Required Qualifications & Experience

  • Bachelor's or Master's Degree in Control Engineering, Automation, Electronics, or related fields.
  • Prior offshore experience, preferably on board an EPC or oil & gas vessel.
  • Strong interpersonal and coordination skills in multicultural environments.
  • Proven ability to produce and review technical documentation.
  • Familiarity with QA/QC and HSE principles and compliance.

How To Apply
If you are ready to take on this challenging role and contribute to the success of Saipem's projects, please submit your CV
in English
by clicking on the link below.

This advertiser has chosen not to accept applicants from your region.

Senior Control Systems Engineer

Dubai, Dubai beBeeEngineering

Posted today

Job Viewed

Tap Again To Close

Job Description

Control Systems Engineering Manager

As a seasoned professional in the oil and gas industry, we are seeking an experienced Control Systems Engineering Manager to lead our engineering team.

Key Accountabilities:
  • Lead and direct a team of engineers and designers on detailed design and engineering activities related to oil and gas production/topside control systems.
  • Ensure full understanding and scope of definition against contract/bid information handed over from applications engineering team.
  • Work with project planners to generate design and development plans with focus on personnel and all engineering deliverables including final documentation.
  • Scope and budget engineering deliverables through engineering resources allocation.
  • Release engineering 'sign off' on project design deliverables/documents.
  • Technical approval authority on engineering change requests through ERP.
  • Create and maintain technical risk registers, lessons learned sessions.
  • Problem solving, technical reporting of root cause analysis on project-specific issues.
  • Technical interface to customers/vendors on project-specific or generic matters.
  • Perform departmental activities in strict adherence to ISO 9001 requirements.
  • Set goals and objectives for individuals and departments with measurable KPIs.
  • Proactively participate in process improvements for seamless interdepartmental communication and integration.
  • Training and development initiatives for existing resources with clear schedules.
  • Track and evaluate engineering man hours monitoring mechanisms, subsequent billing, maintain engineering scorecards with reference to live projects.
  • Participate and direct project engineering kick-off meetings, engineering progress review meetings.
Required Skills & Qualifications:
  • Topside oil and gas experience.
  • People management skills.
  • Proficiency in preparation/interpretation of P&ID drawings of pneumatic/hydraulic/PLC-based/hybrid control systems for topside applications such as wellhead control panels.
  • Proficiency in correct interpretation of client specifications and implementation.
  • Experience in preparation/review of engineering datasheets of instrumentation/hydraulic/pneumatic/electrical/PLC components for procurement/approval to clients.
  • Sound knowledge of electrical contactor/relay-based control circuits preparation and troubleshooting.
  • Knowledge in selection of electrical/electronic instruments/components for hazardous area applications such as Zone 0,1,2.
  • Knowledge in selection of LV drives for hydraulic pumps, motor control centers.
  • Awareness of international standards such as IEC79, IEC529, ISA S 5.1.
  • Cable selection CU/XLPE/SWB/PVC and to IEC standards.
  • Basic awareness of fluid mechanics/fluid engineering.
  • Proficiency in AutoCAD software.
About the Position:

This is an exciting opportunity to join our team as a Control Systems Engineering Manager. As a key member of our engineering team, you will be responsible for leading the design and development of control systems for oil and gas production/topside applications.

This advertiser has chosen not to accept applicants from your region.

Electrical Control Systems Engineer

Dubai, Dubai beBeeInstrumentation

Posted 1 day ago

Job Viewed

Tap Again To Close

Job Description

Job Title:

Industrial Automation Specialist

Job Description:

We are seeking a highly skilled industrial automation professional to join our team in a fast-paced environment. The ideal candidate will have strong expertise in process control, instrumentation, and electrical systems, along with hands-on experience in Siemens PLC S7.

This is a critical role requiring excellent troubleshooting abilities, calibration knowledge, and the capability to work independently in real-time.

Key Responsibilities:
  • Design, maintain, and optimize process control and instrumentation systems for efficient operations.
  • Configure, operate, and troubleshoot Siemens PLC S7 systems to ensure seamless integration.
  • Perform calibration of field instruments and guarantee accuracy of measurements to inform decision-making.
  • Diagnose and resolve instrumentation and control system issues promptly to minimize downtime.
  • Provide technical support to operations and maintenance teams to enhance overall performance.
  • Oversee installation, testing, and commissioning of instrumentation equipment to ensure compliance with safety standards.
  • Collaborate with cross-functional teams to drive efficiency and continuous improvement initiatives.
  • Support preventive and predictive maintenance programs for instrumentation and electrical systems to reduce costs and improve reliability.
Candidate Profile:

The ideal candidate will possess:

  • Education: Bachelor's degree in Instrumentation Engineering, Electrical Engineering, or related discipline.
  • Experience: Minimum 7 years in industrial automation and control within the chemical or manufacturing industry.
  • Technical Expertise:
    • Hands-on experience with Siemens PLC S7.
    • Strong process control and instrumentation skills.
    • Knowledge of electrical engineering systems.
    • Calibration and testing expertise.
    • Strong troubleshooting and maintenance abilities.
  • Soft Skills:
    • Strong analytical and problem-solving skills.
    • Ability to work independently in a fast-paced environment.
    • Excellent teamwork and communication skills.
This advertiser has chosen not to accept applicants from your region.

Industrial Control Systems Security Engineer

Abu Dhabi, Abu Dhabi beBeeSecurity

Posted today

Job Viewed

Tap Again To Close

Job Description

A senior industrial control systems engineer is responsible for designing, implementing and maintaining security measures for industrial control systems.

Key Responsibilities
  • Implement the ICS Hardening Framework including operating system patching, application patching, programmable logic controller firmware upgrades, and network and switch upgrades.
  • Design and implement security controls for industrial control systems networks including firewalls, intrusion detection and prevention systems, and other security tools.
  • Lead the continuous patching and firmware updates of all operational technology devices.
  • Develop and maintain industry-recognized security policies, standards, and procedures for industrial control systems in accordance with best practices and regulatory requirements.
  • Conduct risk assessments to identify potential security vulnerabilities and threats to industrial control systems.
Additional Responsibilities
  • Collaborate with contractors to ensure their qualifications meet specific project requirements.
  • Maintain positive relationships with business partners' representatives to deliver operational services, ensure safety, environmental, and cost targets for joint venture plants.
This advertiser has chosen not to accept applicants from your region.

PLC Programming Engineer (Siemens SICAM PAS & SICAM A8000 RTU Specialist)

AED90000 - AED120000 Y Orbit International survey services LLC

Posted today

Job Viewed

Tap Again To Close

Job Description

Job Information

Date Opened

08/25/2025

Job Type

Full time

Industry

Oil & Gas

Work Experience

4-5 years

City

Sharjah

State/Province

Ash Shariqah (Sharjah)

Country

United Arab Emirates

Zip/Postal Code

000

Job Description

Orbit International Survey Services (Orbit ISS) is an industrial asset integrity engineering management firm based in United Arab Emirates, since 2006. We are an ISO 9001:2015, ISO 14001:2015 & ISO 45001:2018 accredited company and have provided asset integrity solutions to high-profile clients throughout the Middle East, North America, and Asia. Founded on the principles of safety, quality, and environmental stewardship, Orbit ISS is committed to providing world-class services and technology that help our clients address complex challenges in the oil, gas, marine and renewable energy sectors.

Visit our website at to learn more.

Role Overview:

Orbit International Survey Services LLC is looking for a skilled PLC Programming Engineer with proven expertise in Siemens SICAM PAS, SICAM A8000 RTUs (CP8022/CP8050), and WinCC SCMS systems. The role involves programming, configuration, testing, and commissioning of automation and control systems for high-voltage substations (765kV/400kV/220kV), with a strong focus on protocol integration, network communication, and IED configuration.

Key Responsibilities:

PLC Programming & Integration:

  • Develop and troubleshoot Siemens PLC programs using TIA Portal (S7-1200, S
  • Configure and integrate communication with field devices using:

  • Modbus (RTU/RS485, TCP/IP)

  • Profinet
  • IEC GOOSE Messaging, MMS)
  • IEC IEC104) for SCADA systems
  • Configure IEDs, RTUs, and gateway devices for interoperability.

Testing & Validation:

  • Perform Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT).
  • Simulate PLC control logic and communication signals using test benches or simulators.
  • Validate communication between PLCs, HMIs, protection relays, and SCADA systems.

Commissioning Activities:

  • Lead and execute on-site commissioning, including:

  • I/O and signal testing

  • Protocol testing (IEC61850/IEC104)
  • Drive/VFD configuration (e.g., Siemens G120)
  • Substation or plant automation system startup

  • Ensure proper configuration of data points for SCADA/EMS/DMS integration.

Troubleshooting & Support:

  • Diagnose and resolve hardware/software issues in the field related to PLCs or protocol communication.
  • Modify PLC or SCADA configurations during commissioning to meet changing requirements.
  • Provide remote or on-site technical support during commissioning and post-handover.

Documentation & Reporting:

  • Prepare technical documents: communication matrices, IED configuration files, test reports, and commissioning checklists.
  • Maintain project-specific backups and version control for PLC, SCADA, and communication configuration files.
  • Support customer training and handover documentation.
Requirements
  • Bachelor's or Diploma in Electrical, Electronics, Instrumentation, or Automation Engineering.
  • 3–6+ years in PLC programming and field commissioning, with hands-on Siemens PLC experience.
  • Practical experience with industrial protocols: Modbus (RTU/TCP), Profinet, IEC61850, and IEC104.
  • Siemens TIA Portal, S7-1200/1500, and HMI (WinCC, WinCC Unified).
  • Configuration tools for IEDs and communication gateways (e.g., Siemens SICAM, Schneider, ABB PCM, SEL).
  • Familiar with network diagnostics tools (Wireshark, IEC61850 test tools).
  • Reading and interpreting electrical drawings, signal lists, and SCADA point lists.
  • Can join immediately upon selection.
This advertiser has chosen not to accept applicants from your region.

PLC Programming Engineer (Siemens SICAM PAS & SICAM A8000 RTU Specialist)

Sharjah, Sharjah Orbit International Survey Services LLC

Posted 1 day ago

Job Viewed

Tap Again To Close

Job Description

Orbit International Survey Services (Orbit ISS) is an industrial asset integrity engineering management firm based in United Arab Emirates since 2006. We are an ISO 9001:2015 ISO 14001:2015 & ISO 45001:2018 accredited company and have provided asset integrity solutions to high-profile clients throughout the Middle East North America and Asia. Founded on the principles of safety quality and environmental stewardship Orbit ISS is committed to providing world-class services and technology that help our clients address complex challenges in the oil gas marine and renewable energy sectors.
Visit our website at to learn more.

Role Overview:
Orbit International Survey Services LLC is looking for a skilled PLC Programming Engineer with proven expertise in Siemens SICAM PAS SICAM A8000 RTUs (CP8022/CP8050) and WinCC SCMS systems . The role involves programming configuration testing and commissioning of automation and control systems for high-voltage substations (765kV/400kV/220kV) with a strong focus on protocol integration network communication and IED configuration.
Key Responsibilities:
PLC Programming & Integration:
  • Develop and troubleshoot Siemens PLC programs using TIA Portal (S7-1200 S7-1500).
  • Configure and integrate communication with field devices using:
    • Modbus (RTU/RS485 TCP/IP)
    • Profinet
    • IEC 61850 (GOOSE Messaging MMS)
    • IEC(IEC104) for SCADA systems
    • Configure IEDs RTUs and gateway devices for interoperability.
Testing & Validation:
  • Perform Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT).
  • Simulate PLC control logic and communication signals using test benches or simulators.
  • Validate communication between PLCs HMIs protection relays and SCADA systems.
Commissioning Activities:
  • Lead and execute on-site commissioning including:
    • I/O and signal testing
    • Protocol testing (IEC61850/IEC104)
    • Drive/VFD configuration (e.g. Siemens G120)
    • Substation or plant automation system startup
  • Ensure proper configuration of data points for SCADA/EMS/DMS integration.
Troubleshooting & Support:
  • Diagnose and resolve hardware/software issues in the field related to PLCs or protocol communication.
  • Modify PLC or SCADA configurations during commissioning to meet changing requirements.
  • Provide remote or on-site technical support during commissioning and post-handover.
Documentation & Reporting:
  • Prepare technical documents: communication matrices IED configuration files test reports and commissioning checklists.
  • Maintain project-specific backups and version control for PLC SCADA and communication configuration files.
  • Support customer training and handover documentation.
Requirements
  • Bachelor s or Diploma in Electrical Electronics Instrumentation or Automation Engineering.
  • 3 6 years in PLC programming and field commissioning with hands-on Siemens PLC experience.
  • Practical experience with industrial protocols: Modbus (RTU/TCP) Profinet IEC61850 and IEC104.
  • Siemens TIA Portal S7-1200/1500 and HMI (WinCC WinCC Unified).
  • Configuration tools for IEDs and communication gateways (e.g. Siemens SICAM Schneider ABB PCM SEL).
  • Familiar with network diagnostics tools (Wireshark IEC61850 test tools).
  • Reading and interpreting electrical drawings signal lists and SCADA point lists.
  • Can join immediately upon selection.
#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.

Systems Engineer – Stability and Control

LevelUP HCS

Posted today

Job Viewed

Tap Again To Close

Job Description

The Systems Engineer – Stability and Control is responsible for the analysis, modeling, design, and validation of flight dynamics, stability, and control systems for unmanned aerial vehicles (UAVs). This role ensures that platform-level control characteristics meet operational, safety, and regulatory requirements. The position is key to defining aerodynamic control effectiveness, handling qualities, and flight safety margins across multiple mission profiles.

Responsibilities
Stability & Control Analysis
  • Perform longitudinal and lateral-directional stability analyses using linear and non-linear models across various UAV configurations.
  • Define control surface sizing, actuator response, and control authority based on aerodynamic and mission requirements.
  • Evaluate natural modes, handling qualities, and stability margins throughout the flight envelope, including during launch, transition, and recovery.
Modeling, Simulation & Control Design
  • Develop 6-DOF flight dynamics models using MATLAB/Simulink or equivalent tools for simulation and control system integration.
  • Support the design and tuning of autopilot control laws (e.g., PID, LQR, gain-scheduled controllers) to meet stability and performance criteria.
  • Integrate aerodynamic and mass properties data into dynamic models for high-fidelity simulation.
Verification, Testing & Validation
  • Define and execute Verification & Validation (V&V) strategies for stability and control requirements through simulation, hardware-in-the-loop (HIL), and flight test campaigns.
  • Analyze flight test telemetry to assess dynamic response, control stability, and trim conditions.
  • Support wind tunnel testing, ground testing, and flight testing, including pre- and post-flight predictions and analyses.
System Integration & Interdisciplinary Coordination
  • Work closely with aerodynamics, flight controls, avionics, mechanical systems, and software engineering teams to ensure control system integration and compatibility.
  • Provide input to airworthiness assessments, safety analysis, and certification documents, including handling qualities evaluations per MIL-F-8785C or similar standards.
Documentation & Compliance
  • Prepare and maintain technical documentation including control system models, stability reports, control surface effectiveness data, and compliance matrices.
  • Ensure alignment with applicable UAV and aerospace standards, including CS-UAS, MIL-STD-1797, DO-178C.
Qualifications & Experience
Educational Background
  • Bachelor's Degree in Aerospace Engineering, Flight Mechanics, Control Systems Engineering, or equivalent (REQUIRED)
  • Master's Degree in Flight Dynamics, Control Engineering, or related specialization (PREFERRED)
Professional Experience
  • Minimum 10+ years of relevant experience, with at least 5 years focused on flight stability, dynamics, and control systems in aerospace or UAV applications.
  • Experience with UAVs, fixed-wing, VTOL, or hybrid platforms is preferred.
Technical Skills
  • Flight dynamics and control modeling using MATLAB/Simulink, X-Plane, or Flight Gear
  • Control system design and tuning (classical and modern control methods)
  • Use of stability and control analysis tools (AVL, XFOIL, Athena Vortex Lattice, or equivalent)
Strong understanding of
  • Aerodynamic stability principles
  • Control surface effectiveness and actuator limitations
  • Coupling effects, flutter margins, and flight envelope constraints
Familiarity with
  • Airworthiness and stability standards (e.g., MIL-F-8785C, MIL-HDBK-1797)
  • CFD and mass property data integration
  • DO-160, DO-178C, or equivalent aerospace standards
  • Strong analytical and problem-solving abilities
  • Excellent technical communication and documentation skills
  • Systems-oriented mindset with the ability to integrate across disciplines
  • Strategic thinker with attention to flight safety and operational effectiveness
  • Comfortable in collaborative, fast-paced development environments
Preferred Certifications
  • INCOSE ASEP or CSEP – Preferred
  • Certification in control systems, UAV dynamics, or flight simulation tools – Advantageous
  • AS9100D or ISO 9001 Quality System awareness – Preferred
Additional Requirements
  • Must be eligible for UAE defense/security clearance
  • Willingness to travel for wind tunnel testing, flight test campaigns, or design reviews
  • Fluent in English (Arabic is a plus)
  • Willingness to relocate to UAE
Seniority level
  • Mid-Senior level
Employment type
  • Full-time
Job function
  • Design
Industries
  • Defense and Space Manufacturing

Referrals increase your chances of interviewing at LevelUP HCS by 2x

Abu Dhabi, Abu Dhabi Emirate, United Arab Emirates 2 days ago

Abu Dhabi, Abu Dhabi Emirate, United Arab Emirates 1 month ago

Abu Dhabi, Abu Dhabi Emirate, United Arab Emirates 2 days ago

Abu Dhabi, Abu Dhabi Emirate, United Arab Emirates 8 months ago

Abu Dhabi, Abu Dhabi Emirate, United Arab Emirates 8 months ago

Abu Dhabi, Abu Dhabi Emirate, United Arab Emirates 5 months ago

Abu Dhabi, Abu Dhabi Emirate, United Arab Emirates 5 months ago

Abu Dhabi Emirate, United Arab Emirates 2 days ago

Abu Dhabi Emirate, United Arab Emirates 6 days ago

Engineer, Technical (Systems - Production Operations Team - HQ)

Abu Dhabi, Abu Dhabi Emirate, United Arab Emirates 3 days ago

Abu Dhabi Emirate, United Arab Emirates 1 week ago

Abu Dhabi, Abu Dhabi Emirate, United Arab Emirates 2 days ago

Abu Dhabi, Abu Dhabi Emirate, United Arab Emirates 1 month ago

Abu Dhabi, Abu Dhabi Emirate, United Arab Emirates 1 month ago

Abu Dhabi, Abu Dhabi Emirate, United Arab Emirates 2 months ago

Abu Dhabi, Abu Dhabi Emirate, United Arab Emirates 10 hours ago

Abu Dhabi, Abu Dhabi Emirate, United Arab Emirates 1 month ago

Abu Dhabi, Abu Dhabi Emirate, United Arab Emirates 5 days ago

System Engineer - Ground Control Systems

Abu Dhabi, Abu Dhabi Emirate, United Arab Emirates 3 days ago

IT ATM Test Engineer – ATM and Cards Support

Abu Dhabi, Abu Dhabi Emirate, United Arab Emirates 6 months ago

Abu Dhabi, Abu Dhabi Emirate, United Arab Emirates 2 months ago

Telecom Engineer – Mobile Network Operations & IT Troubleshooting

Abu Dhabi, Abu Dhabi Emirate, United Arab Emirates 3 months ago

Abu Dhabi, Abu Dhabi Emirate, United Arab Emirates 3 days ago

Associate Engineer/Fixed Field Maintenance (FFM)

Abu Dhabi, Abu Dhabi Emirate, United Arab Emirates 1 year ago

Network and Security Operations Engineer

Abu Dhabi, Abu Dhabi Emirate, United Arab Emirates 21 hours ago

Abu Dhabi, Abu Dhabi Emirate, United Arab Emirates 7 months ago

Abu Dhabi, Abu Dhabi Emirate, United Arab Emirates 7 months ago

Abu Dhabi, Abu Dhabi Emirate, United Arab Emirates 1 year ago

Abu Dhabi, Abu Dhabi Emirate, United Arab Emirates 1 month ago

Abu Dhabi Emirate, United Arab Emirates 3 weeks ago

We're unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.


#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
Be The First To Know

About the latest Control systems engineer Jobs in United Arab Emirates !

Control Plane Engineering

AED90000 - AED120000 Y Charterhouse Middle East

Posted today

Job Viewed

Tap Again To Close

Job Description

Competitive Salary

Charterhouse is currently working with an IT Consultancy looking to expand across the region. They have a well-funded technology initiative that is developing a next-generation Network Operating System (NOS) designed to power data centres. Our client is looking to hire for various roles such as Team Lead, Principal & Mid-Level Software Engineers to be part of their Control Plane Engineering Team

The Control Plane Engineering team is responsible for the routing intelligence that drives scalable, high-performance networks across global infrastructure. The team is expanding across multiple levels, from hands-on engineers to strategic technical leaders, to shape the future of networking software in a greenfield environment.

The role involves designing and building the core routing logic of a next-generation network operating system. Responsibilities include the design and implementation of dynamic routing protocols, the development of robust Linux-based services, and ensuring seamless integration between control plane logic and hardware-driven data planes. Collaboration extends across teams focused on hardware abstraction, orchestration, and low-level forwarding, with direct involvement in architectural decisions and protocol behavior.

This is a unique opportunity to contribute to the development of a new network operating system from the ground up. It provides an environment that is both fast-paced and technically ambitious, where contributions directly shape the architecture and behavior of core networking software. The project combines the agility of a startup with the resources of a well-funded initiative, offering meaningful ownership, global collaboration, and the chance to build without the constraints of legacy systems.

Our client is actively seeking for exceptional talent across various profiles.

The ideal candidate for the Software Engineer role must demonstrate strong C programming skills, Linux system-level development experience, and a solid understanding of Ethernet/IP and routing protocols, with the ability to interpret standards and implement compliant code.

Principal Engineer candidate, must have a deep expertise in routing protocols, Linux kernel networking, and distributed systems, along with having designed scalable control plane software and in close partnership with hardware teams to deliver production-grade solutions.

A Team Lead candidate is required to demonstrate a proven track record in managing high-performing engineering teams, defined technical strategy, and delivering carrier-grade routing software. The role demands a hands-on leader with architectural vision, as well as experience in scaling both teams and processes. Aside from the technical skills, strong written and verbal communication in English is essential.

This advertiser has chosen not to accept applicants from your region.

Automation Engineer

AED120000 - AED240000 Y The Install Guyss

Posted today

Job Viewed

Tap Again To Close

Job Description

Location: Dubai, UAE

Working Days/Hours: Monday – Saturday, 8:00 AM – 6:00 PM

Freelanced & Own Visa Candidates are acceptable

About the Role

We are seeking a skilled and motivated Home Automation Engineer with expertise in Wireless ZIGBEE and ELV (Extra Low Voltage) systems.

The ideal candidate will handle end-to-end project execution, from planning and installation to configuration and client handover. Knowledge of electrical systems will be considered a strong advantage.

This role requires hands-on technical ability, problem-solving skills, and the ability to manage smart home/office automation projects independently and efficiently.

Key Responsibilities

  • Design, install, configure, and maintain wireless ZIGBEE-based smart home and office automation systems.
  • Handle ELV system installations including lighting control, smart switches, security systems, CCTV, access control, and AV integration.
  • Work on end-to-end project execution: site surveys, wiring, installation, programming, testing, and client training.
  • Troubleshoot and resolve system integration issues (hardware/software/network).
  • Collaborate with project managers and technicians to deliver high-quality installations on time.
  • Ensure compliance with safety standards and best practices in electrical and ELV systems.
  • Provide after-sales technical support and system maintenance when required.

Requirements

  • Proven experience in home/office automation projects (minimum 2–3 years preferred).
  • Strong knowledge of ZIGBEE protocols and smart home ecosystems (e.g., LifeSmart, Aqara, Tuya, etc.).
  • Hands-on experience with ELV systems (lighting, CCTV, access control, intercoms).
  • Electrical background/knowledge is a strong advantage.
  • Ability to read and interpret wiring diagrams, technical drawings, and specifications.
  • Familiarity with network setup (LAN, Wi-Fi, routers, switches) is desirable.
  • Problem-solving mindset with attention to detail.
  • Ability to manage multiple tasks and deliver under deadlines.
  • Good communication skills in English (Arabic is an added advantage).
  • UAE driving license preferred.

Benefits

  • Competitive salary (based on experience).
  • Career growth opportunities in the rapidly growing smart home & automation industry.
  • Training and certification opportunities with leading automation brands.
  • Exposure to innovative projects across residential, commercial, and luxury properties in Dubai.

Job Type: Full-time

Pay: From AED3,000.00 per month

Application Question(s):

  • Do you have your own visa such as spouse, freelance, etc ?

Experience:

  • Home Automation: 1 year (Required)

Language:

  • english (Required)

License/Certification:

  • UAE driving License (Required)

Application Deadline: 05/09/2025

Expected Start Date: 01/09/2025

This advertiser has chosen not to accept applicants from your region.

Automation Engineer

AED90000 - AED120000 Y Enova by Veolia

Posted today

Job Viewed

Tap Again To Close

Job Description

Job Purpose

This role will be responsible for supporting the development, customization, and deployment of SkySpark-based analytics solutions for building systems with a strong focus on BMS and HVAC data. The role involves working and supporting he team on real-time data acquisition, fault detection diagnostics (FDD), data modeling, tagging (Haystack), and supporting energy efficiency initiatives across facilities and buildings. You are expected to provide support and develop the skills towards the implementation and optimization of the controls and automation systems, providing technical expertise as required to regulate, evaluate, and improve existing systems, mapping and integrating existing metering/instrumentation systems. The key candidate will be willing to travel in the MENA region.

Key Accountabilities

  • Develop and maintain SkySpark projects including Axon scripting, rules, KPIs, visualizations, and connectors.
  • Supporting the team to configure and manage data integrations with BMS, HVAC, and other building automation systems using protocols like BACnet, Modbus, and MQTT.
  • Work with Project and Energy Management teams to understand system behaviours and assist the teams in implementing energy savings opportunities.
  • Maintaining custom dashboards, charts, and reports for energy performance monitoring and fault detection. Identifying any issues with the dashboards and supporting the team with rectifications.
  • Tag building assets and data using Project Haystack standards.
  • Troubleshoot and validate data acquisition and accuracy within the SkySpark environment.
  • Collaborate with field teams to integrate and commission SkySpark for new and existing projects.
  • Support senior engineers in performing root cause analysis and generating insights from data analytics.
  • Document technical configurations, logic rules, and project status for internal records and client communication.
  • Stay updated with SkyFoundry best practices, releases, and enhancements.
  • Work with line manager to appropriately plan the workload schedules and take a proactive approach to tasks to efficiently manage workload and resources.
  • Supporting the analysts with analysis of existing building systems and the collection of data on building operations, HVAC, electrical, lighting and controls to support with the evaluation of energy efficiency and usage.
  • Learn and develop the skills to grow the knowledge related to the applications used in Hubgrade and to take the lead on suggesting and implementing improvement strategies.
  • Be part of the sharing and the implementation of best practices.
  • Manage the improvement of operational quality results through process re-design, in addition to overseeing the identification of operational problems and priorities by assessing relevant objectives.
  • Provide inputs to implement and continuously enhance departmental policy and procedures
  • Preparation of timely and accurate departmental statements and reports to meet Enova's and department requirements, policies and standards, including the preparation and assessment of operation reports.
  • Abide by the Health, Safety, Energy, Environmental and Quality (HSEEQ) policy, procedures necessary for the good conduct and safety of the workplace. It is a requirement and moral obligation of each employee to be actively committed and accountable to the compliance of Enova's HSEEQ policy, operating procedures, as well as being compliant with local legislation. The Employee shall seek clarification and guidance in specific cases or whenever one feels necessary.

Qualifications, Experiences, Skills

  • Mechanical, Electrical, Electronic or Instrumentation Engineering Degree
  • 2-4 years experiences in Automation/ Engineering/ data analytics position
  • Proficiency in maintaining automation systems preferably Niagara
  • Experience with Axon programming for Sky Spark
  • Understanding of project Haystack tagging & implementation
  • Solid understanding of computer programming and software development
  • Ability to troubleshoot equipment and perform complex system tests
  • Strong problem-solving skills
  • Excellent organizational skills and attention to detail
  • Excellent verbal and written communication skills
  • Strong analytical skills
This advertiser has chosen not to accept applicants from your region.
 

Nearby Locations

Other Jobs Near Me

Industry

  1. request_quote Accounting
  2. work Administrative
  3. eco Agriculture Forestry
  4. smart_toy AI & Emerging Technologies
  5. school Apprenticeships & Trainee
  6. apartment Architecture
  7. palette Arts & Entertainment
  8. directions_car Automotive
  9. flight_takeoff Aviation
  10. account_balance Banking & Finance
  11. local_florist Beauty & Wellness
  12. restaurant Catering
  13. volunteer_activism Charity & Voluntary
  14. science Chemical Engineering
  15. child_friendly Childcare
  16. foundation Civil Engineering
  17. clean_hands Cleaning & Sanitation
  18. diversity_3 Community & Social Care
  19. construction Construction
  20. brush Creative & Digital
  21. currency_bitcoin Crypto & Blockchain
  22. support_agent Customer Service & Helpdesk
  23. medical_services Dental
  24. medical_services Driving & Transport
  25. medical_services E Commerce & Social Media
  26. school Education & Teaching
  27. electrical_services Electrical Engineering
  28. bolt Energy
  29. local_mall Fmcg
  30. gavel Government & Non Profit
  31. emoji_events Graduate
  32. health_and_safety Healthcare
  33. beach_access Hospitality & Tourism
  34. groups Human Resources
  35. precision_manufacturing Industrial Engineering
  36. security Information Security
  37. handyman Installation & Maintenance
  38. policy Insurance
  39. code IT & Software
  40. gavel Legal
  41. sports_soccer Leisure & Sports
  42. inventory_2 Logistics & Warehousing
  43. supervisor_account Management
  44. supervisor_account Management Consultancy
  45. supervisor_account Manufacturing & Production
  46. campaign Marketing
  47. build Mechanical Engineering
  48. perm_media Media & PR
  49. local_hospital Medical
  50. local_hospital Military & Public Safety
  51. local_hospital Mining
  52. medical_services Nursing
  53. local_gas_station Oil & Gas
  54. biotech Pharmaceutical
  55. checklist_rtl Project Management
  56. shopping_bag Purchasing
  57. home_work Real Estate
  58. person_search Recruitment Consultancy
  59. store Retail
  60. point_of_sale Sales
  61. science Scientific Research & Development
  62. wifi Telecoms
  63. psychology Therapy
  64. pets Veterinary
View All Control Systems Engineer Jobs