806 Inspector jobs in the United Arab Emirates

• Inspect Contractor's work to assure it is in accordance with contract plans and specifications, and in accordance with RFIs, submittals and approved changes.
• Issue non-compliance reports documenting deficient work and follow-up until the defective work is corrected or accepted by Owner or Engineer.
• Assist with pre-construction efforts including taking inspector's set of pre-construction photos and videos.
• Assist the Owner and Engineer with site investigations when differing and unforeseen conditions are encountered and with Owner initiated changes.
• Coordinate with the Owner, Engineer, and Contractor to assure that required permits are obtained and in compliance.
• Prepare daily inspection reports and daily inspector photos.
• Monitor the progress of the work and document in the daily inspection report when, where and why progress is falling behind the approved schedule.
• Field verify, and Document installed bid quantities and assist with final quantity reconciliation.
• Inspect temporary silt fencing and other erosion and storm water control measures to assure they comply with the Contractor's storm water pollution protection plan.
• Attend and assist with progress and coordination meetings.
• Coordinate with testing labs, Owner, Engineer and Contractor to assure that required tests and inspections are performed.
• Witness various field and/or factory tests and document results on Owner or Engineer furnished reports.
• Assist with reviewing pay applications.
• Review Contractor's as-built drawings as work progresses to ensure they are up to date.
• Assist with coordinating the Contractor's work to minimize and eliminate impacts to the Owner, public and other stakeholders.
• Assist with testing, startup, and commissioning of new systems.
• Assist in project close-out process.

Requirements:

• Minimum 5 years of experience in general civil, facility, mechanical, electrical, plumbing, control and specialty fields of construction.
• Expertise and knowledge of all CSI divisions, vertical and horizontal construction.
• Proficiency with reading, understanding and correlating plans and specifications.
• Experience with Microsoft Word, Excel, and Project.
• Prior experience with large, capital improvement, public works projects involving coordination between multi-disciplined contractors.
• 10 hour OSHA safety course; 40 hour Supervisor course preferred.
• First aid & CPR training preferred.
• ICBO, or equivalent, certification preferred.
• Prior supervisory/ lead inspector experience.

Why Join LEO A DALY?

At LEO A DALY, you will become part of a collaborative design culture and do work that matters. As an integrated design practice, we believe that a diversity of perspectives generates better solutions. We trust and support each other, ask hard questions and solve complex problems. Guided by a spirit of inquiry, we design for people at every scale, creating spaces that elevate individuals, their communities, and the institutions that serve them. Join LEO A DALY - help us transform the world.

LEO A DALY LLC is an Equal Opportunity Employer and gives consideration for employment to qualified applicants for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. LEO A DALY LLC, is committed to ensuring equal employment opportunities, including providing reasonable accommodations to individuals with a disability. Applicants with a physical or mental disability who require a reasonable accommodation for any part of the application or hiring process may contact the Human Resources Department by phone at or by email at . For more information about your rights under the law, see Know Your Rights.

Qualification & Experience & Skills:

• one of the following majors: chemistry, biochemistry, pharmacy, pharmaceutical sciences, pharmaceutical care, epidemiology, preventive health, toxicology, pharmacology,microbiology, health promotion, health security, virology, preventive medicine, public health, and pharmaceutical management.

Or

• one of the following majors: food sciences and human nutrition, food processing engineering, microbiology, mycology, biochemistry, environmental sciences, environmental health sciences, environmental protection, medical microbiology, and veterinary medicine

-Valid UAE driving license is mandatory

-Have basic knowledge of EN ISO/IEC 17020,17065 etc. is a plus.

-Proficient in using computer systems, including knowledge of Microsoft Office

-Ability to travel to various inspection sites as required.

-Adapt to flexible working hours

-Proficiency in English is essential for documentation, reporting, and effective communication.

-Strong organizational skills

-Attention to detail

Job Description

-Undertake the inspection/test service in accordance with the instructions given to him in accordance with the quality documentation of company, in accordance with national and international standard methods referring to company procedures, rules and principles and technical specifications of the product subject to inspection,

-Arrive at inspection sites on time and prepared to perform required tasks.

-Perform sampling, qualitative and quantitative assessments / inspection in accordance with TÜV AUSTRIA procedures and instructions.

-Take photographs and other documentation as required to support inspection findings.

-Keep accurate records of all inspections and sample collections.

-Delivery of samples to the laboratory on behalf of TÜV AUSTRIA when required

-Coordinate with other team members and departments to ensure seamless inspection processes.

-Report any non-conformities or issues encountered during inspections to the appropriate personnel.

-Prepare detailed reports and documentation of inspection findings.

-Collaborate with the quality assurance team to identify areas for improvement.

-Follow TÜV AUSTRIA's protocol for labelling, sealing and bagging during sampling process

Job Type: Full-time

License/Certification:

• UAE driving licence (Preferred)

Job Overview:

The Quality Inspector applies their conceptual knowledge of inspection and, with a moderate level of guidance and direction from colleagues and leadership, is responsible for solving a range of straightforward inspection problems. They will be responsible for analyzing possible solutions using standard procedures and building knowledge of the company, processes, and customers. The Quality Inspector understands key business drivers and applies this knowledge to solve problems in straightforward situations by analyzing possible solutions using technical experience, judgment, and precedents.

Our ingenuity fuels daily life. Together, we've forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.

For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.

Key Tasks and Responsibilities:

• Determine product conformity to customer specifications through daily surveillances and ITP inspection points in accordance with the Project Quality Plan
• Identify non-conformity for rectification and ensure final resolution
• Appraise product quality to determine conformity and non-conformity in accordance with the approved drawings and inspection & Test Plan; All inspection results need to be documented, and if non-conformity exists, documentation shall be raised to establish corrective action
• Coordinate interface with Operations, Certifying Authority, Client, Job Sharing personnel, and subcontractor, assuring the conformity to project specifications
• Exercise a proactive approach to the prevention of a problem by interacting with Production, Engineers, and Management personnel
• Liaise with customer representatives, ensuring product conformity and stage release for each activity denoted within the Project Quality Plan/ITP

Essential Qualifications and Education:

• High school diploma or degree in relevant field of study
• 5+ years of Quality Control or discipline-related experience with a degree and 8+ with a diploma
• Proficient in the use of computer and Microsoft programs

• Exp with villas, hospitality, residential  
  
  

• Reading and understanding the package contract documents, detailed drawings, specifications, and health and safety measures, together with any associated updates.
• Ensuring the Contractor(s) are complying with the standards and specifications of the contract documents through observation, measurements, and testing as well as tracking quality assurance progress.
• Maintaining records of the Contractor's manpower and equipment daily resources.
• Undertaking all site supervision and inspections when required or instructed by the Resident Engineer (RE) or the Assistant Resident Engineer (ARE).
• Documenting, in the areas assigned to the Inspector, the Contractor's personnel and equipment, activities observed, location of activities, reason for activities, and means and methods utilized.
• Additionally, report on materials delivery and following and implementing any site instructions made by the leader. Apply and implement all quality controls and quality procedures of the site.
• Follow up and implement any site instructions made by the leader.
• Apply and implement all quality controls and quality procedures of the site.
• Prepare any site measurements and surveying checks needed by the leader.
• Monitoring conformance to quality, performance, and/or code requirements by performing inspection duties.
• Monitor Health and Safety of the construction works and report on violations.

• Bachelor's degree in Mechanical engineering, or related field.
• 8+ year of proven experience (minimum 3-5 years of experience in UAE OR Gulf) working as a Mechanical Inspector or similar role in the construction industry for Tower & Villa projects.
• Good knowledge in basic design requirements, familiar with Mechanical methodologies and
• installation processes and procedures. Knowledge of the Building Codes.
• Effective oral and written communication skills.
• Competent at writing reports - can present views clearly and concisely in good written English.
• Detailed knowledge of construction techniques.

• Tax-free salary.
• Comprehensive life insurance coverage.
• Premium medical insurance coverage for you and your dependents.
• Generous annual leave balance.
• Remote work opportunities outside of country.
• Flexible/hybrid work solutions.
• Company gratuity scheme.
• Discretionary bonus program.
• Annual flight contribution.
• Relocation assistance.
• Transportation & housing allowances: Available for remote work locations.
• Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, as well as personal health, fitness, and nutrition consulting.

• Having clear and concise procedures and guidelines for both line managers and employees to ensure policies are fully understood and implemented.
• Complying with the relevant employment legislation and codes of practice.
• Ensuring that all existing employees, potential employees, colleagues, and customers are treated equally and with respect.

• The inspectors shall ensure that the project documentation list is received and that he is made aware of means of locating documentation either hard copy or in electronic formats.
• The documentation list is to include:
• Drawings, Specification details, Fire Policy drawings, Drawing Register, Shop Drawing, Material Submittal, Samples, Method Statements. Any other documentation that is relevant to the project.
• Inspectors shall ensure that correct number of inspections are offered by the contractors i.e. ensure that the number is adequate to check that works are inspected at appropriate stages to ensure good quality and if necessary remedial work instructed. This is to be done in the form of NCR, Letter or Minutes of Meeting recording or any other form being used on the project.
• During the inspection of the works the inspectors are to familiarise themselves with other work in the area and co-ordinate with other inspectors. If there are any particular requirements to keep into consideration either trade must keep themselves informed and update.
• It is the inspector duties to carry out walk around inspections on the sites on a daily basis and inform
• the RE of any poor - workmanship or safety issue.
• The application of Pre-inspections will assist the contractor in assuring that a good quality project is delivered without having to re-work areas which may not be accepted at the time of contractor's formal inspection request. This should become a cost or saving exercise for all parties involved.
• The inspectors prior to inspecting areas of work are to familiarise themselves with the Material Approval Sheets (MAS) and to ensure that the correct Material has been employed and especially if there are particular manufacturers method of applications (Manufacturer Method Statements) sample of materials are also to be requested.
• To facilitate the standards of installation the inspectors should request sample installation/work to be taken as an example and be shown to all tradesmen to set standards.
• If the materials are subject to site testing ensure that the test are carried out in the presence of the inspectors and test sheets are submitted for record and later insertion into the operating and maintenance manuals.
• The inspectors shall monitor the progress of the site taking into consideration the site construction programmes. Any deviation from the target/milestone dates are to be communicated to the Resident Engineer for further action.
• It is the inspector's duty to be amongst the inspectors to ensure that the site progress is not being held by any of the trades involved on the project.
• It is imperative that Technical Queries raised in writing by the contractors are answered as a quick turnover issue and if not answered by site and require design office input these are to be monitored.
• Technical Queries are to be discussed amongst the trade inspectors to ensure that no input reply is required from other trades inspectors or joint replies prior to issuing.

• The inspectors are to make themselves familiar with the Document control quality system in use in WSA and to keep monitored together with the site Document Controller (If present on site).

• 8 years minimum experience of working on our everyday site basis - knowledge of the Middle East working conditions would be preferable.
• Experience working with a consultancy office would be preferable but also experience working with International contractors is acceptable.
• B Tech in appropriate discipline or equivalent or able to demonstrate have suitable experience.

• Tax-free salary.
• Comprehensive life insurance coverage.
• Premium medical insurance coverage for you and your dependents.
• Generous annual leave balance.
• Remote work opportunities outside of country.
• Flexible/hybrid work solutions.
• Company gratuity scheme.
• Discretionary bonus program.
• Annual flight contribution.
• Relocation assistance.
• Transportation & housing allowances: Available for remote work locations.
• Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, as well as personal health, fitness, and nutrition consulting.

• Having clear and concise procedures and guidelines for both line managers and employees to ensure policies are fully understood and implemented.
• Complying with the relevant employment legislation and codes of practice.
• Ensuring that all existing employees, potential employees, colleagues, and customers are treated equally and with respect.

• Monitors QA/QC core functions: measures, records and reports dimensional, functional and visual attributes as per specified requirements
• Maintains and updates quality relevant specifications such as inspection plans, specifications, drawings and packaging instructions including its review
• Responsible in ensuring that all test equipment/devices are calibrated and calibration records are maintained
• Inline system management by conducting shop floor & warehouse checks
• Responsible for finished goods release and control
• Prepares the Certificate of Analysis reports as per customer requirement
• Coordinates with concerned department for Alpla Qualification Procedure (AQP) sampling and evaluation
• Prepares and finalizes AQP/sampling reports
• Processes and analyses quality relevant figures and data
• Responsibility of hold area management (hold labels, daily site checks) and QA sub inventory checks and accuracy including monthly reporting
• Executes analysis via professional problem -solving tools.
• Ensure GMP & FSMS compliance throughout the processes and activities of the pre-requisite programs related to FSSC 22000.

Education/ Professional Qualifications

Minimum High School Diploma with 2 years technical degree or Bachelor

Experience

• Minimum 3 years' experience as Quality Control inspector preferred in plastic industry

Qualifications/ Skills/ Personal Competencies

• Must have working knowledge on ISO 9001 & ISO 22000.
• Knowledge in MS office (Excel, Word, Power Point)
• Good in verbal and written English.
• Good interaction with the people.
• Has analytical and problem solving skills
• Has leadership skills
• Ability to work as a part of the team

• "Great place to work" certified and family working environment
• Integration in a young, dynamic team
• Challenging tasks with a high degree of self-responsibility
• Individual performance will be remunerated and further development supported

ALPLA PLASTIC MIDDLE EAST INDUSTRIES L.L.C.

Bayut & dubizzle have the unique distinction of being iconic, homegrown brands with a strong presence across the seven emirates in the UAE. Connecting millions of users across the country, we are committed to delivering the best online search experience.

As part of Dubizzle Group, we are alongside some of the strongest classified brands in the market. With a collective strength of 5 brands, we have more than 123 million monthly users that trust in our dedication to providing them with the best platform for their needs.

We are looking to hire a Vehicle Inspector for our dubizzle Cars team. As a Car Inspector, you will be responsible for carrying out detailed inspections on cars of all body types and preparing a report of the findings that includes details derived from the mechanical, electrical, paint & underbody condition, onboard diagnostic checks, and pictures that document any damage or areas that need attention. You will require a lot of ownership skills as Inspectors qualify the car, which can enter the ecosystem of our organisation.

In this role, you will:

• Inspect automotive vehicles to ensure compliance with emission standards and governmental regulations;
• Inspect the vehicle to derive conclusions about the functionality and performance of the engine, transmission, steering, suspension, brakes, interior, electricals, air-conditioners, tyres and ECU/Sensors;
• Inspect the vehicle to derive conclusions about the paint synergy and any accidental or wear-and-tear damage;
• Inspect the vehicle to derive conclusions about any missing, dysfunctional or illegal part or equipment;
• Check preventive maintenance programs;
• Investigate complaints, accidents, auction history and total loss claims;
• Conduct VIN Investigation for previous records in the inspection directory;
• Liaise with the Team Leader in case of critical findings of the investigation or confusion to get a go-ahead;
• Take professional photographs of the car being inspected;
• Take pictures of the error/ findings while conducting the inspection;
• Prepare reports for cars that have been inspected by you;
• Review of the reports through the list of post-inspection checkpoints to conclude report preparation;
• Suggest improvements to vehicles that fail inspection when required.

• High School or Mechanical Diploma

• Valid UAE driving license
• 5 or more years of experience as a vehicle inspector
• Mechanical and Electrical work experience in automotive
• Automotive Certification (Good to have)
• Automobile Knowledge (Expert Level
• Car Segments & Knowledge about old and latest models
• Knowledge of using relevant automotive inspection equipment
• Photography Skills
• Basic Computer Knowledge
• Attention to detail
• Make good observation based decisions & action plans
• Confident working in a technology-focused environment
• Self-motivated with a determined work ethic
• Experience working under changing circumstances and tight deadlines
• Positive behavior
• Teamwork
• Motivated, high-energy individual with a good work ethic
• Enthusiastic towards automobiles

• A fast paced, high performing team.
• Multicultural environment with over 50 different nationalities
• Competitive Tax-free Salary
• Comprehensive Health Insurance
• Annual Air Ticket Allowance
• Employee discounts at multiple vendors across the emirates
• Rewards & Recognitions
• Learning & Development opportunities.

Bayut & dubizzle is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

#UAEdubizzle

Requisition Number: 23349BR

Description:

Stantec is looking to hire a Civil Inspector for a Water Infrastructure Project in Dubai. The Civil Inspector must have full and complete knowledge of the existing infrastructure in the Emirates of Dubai.

Qualifications:

1. The Inspector must have relevant technical qualification and must have not less than 7 years experience in the construction and supervision of infrastructure works.
2. He must also have full and complete knowledge of existing infrastructure networks in the emirates of Dubai.
3. He must be well experienced in the survey work with modern instruments and in keeping site measurement records.
4. He must have full knowledge and experience in dealing with existing infrastructure services.
5. Solid experience in maintaining relevant records and generating activity reports.
6. Experience in identifying non-conforming works, generating reports and corrective actions and coordinating responses.
7. Excellent verbal and written English communication skills.

Work Location(s): United Arab Emirates-Dubai

Employment Type: Full-Time

Job Type: Regular

Job Category: Civil Engineering, Construction