123 Mechanical Maintenance jobs in the United Arab Emirates

The jobholder is responsible to supervise, coordinate, troubleshoot lead and administrate the Mechanical Maintenance team of Senior Technicians, composed by direct hires and contractors, doing installation and commissioning of equipment and execution of Predictive, Preventive, Proactive and Corrective Maintenance works on a wide range of rotating, static plant equipment and piping systems ensuring they are performed safely in time, with the required quality and in a manner to comply with all applicable local laws and regulations in accordance with company guidelines and HSE policy and procedures.

• Conduct equipment troubleshooting, decide on the corrective action and ensures that the right maintenance is done on the equipment needing repairing.
• Supervision of installation, repairing and maintenance jobs on a wide variety of equipment and systems covering all plants on site.
• Monitor the work execution checking the quality and following up the work progress ensuring the completion on time.
• Monitor and inspect the work of maintenance contractors conducting works on the plant to ensure compliance with specified terms and parameters.
• Ensure that the quality procedures, vendor/ OEM instructions, HSE requirements, etc. are available & followed by the job execution group.
• Inspect completed jobs for conformity to statutory and Company standards and regulations.
• Regularly inspect the workshops and other workplaces used by his team looking for a good housekeeping and a proper organization.
• Review regularly the tools distributed to his team, individual tools in the toolboxes and other, ensuring the return in time of the non-permanent tools, all the needed tools are available for the job execution and the normalization of all situations.
• Ensure that all members of the team have the proper PPEs and adhere to the HSE rules and ensure also that all effectively manages all waste.
• Perform regular toolbox talks to pass all type of information to the team of Technicians like HSE&Q and HR related, daily activity, etc.
• Discuss the daily maintenance and start-up schedule and the daily plan with the Planners and Operation teams to ensure optimum use of resources such as time, material, and labour.
• Ensure execution of scheduled pre-commissioning, commissioning and start-up maintenance and troubleshooting maintenance activities on large and complex equipment to ensure proper operating conditions of Company’s assets and adherence to international standards.
• Coordinate and provide technical support to shift personnel for any requirement related to job.
• Provide day to day instructions for safe job execution.
• Supervise mechanical maintenance jobs for the assigned plant area with objectives to minimize failures, reduce pre-commissioning, commissioning and start-up delays and ensure equipment reliability & availability.
• Perform Visual, Close and Detailed inspection of installed mechanical equipment.
• Observe and approve Functional Tests, Equipment Run tests, etc.
• Participate in Safety Audits and Area Walk downs as part of acceptance list the Start-up.
• Review and approve procurement of required spare parts based on equipment criticality analyses.
• Receive and physically inspect delivered spare parts.
• Complete detailed Technical Feedback in SAP for future failure analysis
• Verify that required PM plans for equipment maintenance and preservation are executed as per procedures.
• Maintain equipment files that contain equipment datasheet, maintenance logbook, history and any other relevant records like calibration reports, checklist etc.
• Attend interface meetings with Project Teams and custodian departments to facilitate resolution of issues and promote good working relations.
• Participate in development and review of work instructions and check lists used for the execution of maintenance works.
• Ensure that mechanical equipment and systems on facilities can be operated in a safe and environmentally sound manner to comply with all applicable local laws and regulations in accordance with company guidelines and complex HSE policy and procedures.
• Conduct task risk assessment and responsible for maintaining safety at work location.
• Coordinate with different departments to ensure the timely completion of all maintenance jobs in the safest & effective manner.
• Maintain records of the work performed and progress, other related data, processes the paperwork related to the jobs and provides inputs for the monthly report.
• Perform time entry approval for the technicians collaborating with him.
• Ensures the work orders are properly confirmed and failure codes are put for all the jobs performed in SAP.
• Coordinate with all his team members the overall annual leave plan to have an even workforce distribution ensuring the minimum availability.
• Contribute to the evaluation of the contractor’s technicians before they join the team and follows-up their performance afterwards.
• Determine the training needs for the team members and trainees and ensures the adequate training on-the-job for their skill’s development.
• Initiate a Failure Report as per the criteria and support Engineers by giving inputs for the root cause failure analysis, improvement suggestions on chronic failures, spare parts management parameters, Preventive Maintenance plans, etc. and executes all the related actions assigned to him.
• Raise material reservations and assists in the receipt of materials and spare parts, helping to check the quality of the supplies. Ensure unused materials is returned to warehouse within define time.
• Responsible for segregation of repairable and non-repairable items, tagging, tracking, record keeping. and initiates actions for their refurbishment.
• Diploma or equivalent technical qualifications in Mechanical discipline.
• Good command, communication, and technical reporting writing skills in English Language.
• Minimum of 6 years of relevant experience in installation, repair, testing and maintenance of a wide range equipment items of production facilities in an oil/gas or petrochemical industry.
• Maintenance and troubleshooting experience on Rotating & Static Equipment in Oil & Gas.
• Hands on SAP basic work management operations related to maintenance.
• Hands on the documentation and reporting procedures for abnormal conditions.
• Working knowledge on Operation & Maintenance manuals and engineering documents/drawings. to troubleshoot and solve equipment problems and to determine optimum equipment functioning.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

The jobholder is responsible to supervise, coordinate, troubleshoot lead and administrate the Mechanical Maintenance team of Senior Technicians, composed by direct hires and contractors, doing installation and commissioning of equipment and execution of Predictive, Preventive, Proactive and Corrective Maintenance works on a wide range of rotating, static plant equipment and piping systems ensuring they are performed safely in time, with the required quality and in a manner to comply with all applicable local laws and regulations in accordance with company guidelines and HSE policy and procedures.

• Conduct equipment troubleshooting, decide on the corrective action and ensures that the right maintenance is done on the equipment needing repairing.
• Supervision of installation, repairing and maintenance jobs on a wide variety of equipment and systems covering all plants on site.
• Monitor the work execution checking the quality and following up the work progress ensuring the completion on time.
• Monitor and inspect the work of maintenance contractors conducting works on the plant to ensure compliance with specified terms and parameters.
• Ensure that the quality procedures, vendor/ OEM instructions, HSE requirements, etc. are available & followed by the job execution group.
• Inspect completed jobs for conformity to statutory and Company standards and regulations.
• Regularly inspect the workshops and other workplaces used by his team looking for a good housekeeping and a proper organization.
• Review regularly the tools distributed to his team, individual tools in the toolboxes and other, ensuring the return in time of the non-permanent tools, all the needed tools are available for the job execution and the normalization of all situations.
• Ensure that all members of the team have the proper PPEs and adhere to the HSE rules and ensure also that all effectively manages all waste.
• Perform regular toolbox talks to pass all type of information to the team of Technicians like HSE&Q and HR related, daily activity, etc.
• Discuss the daily maintenance and start-up schedule and the daily plan with the Planners and Operation teams to ensure optimum use of resources such as time, material, and labour.
• Ensure execution of scheduled pre-commissioning, commissioning and start-up maintenance and troubleshooting maintenance activities on large and complex equipment to ensure proper operating conditions of Company’s assets and adherence to international standards.
• Coordinate and provide technical support to shift personnel for any requirement related to job.
• Provide day to day instructions for safe job execution.
• Supervise mechanical maintenance jobs for the assigned plant area with objectives to minimize failures, reduce pre-commissioning, commissioning and start-up delays and ensure equipment reliability & availability.
• Perform Visual, Close and Detailed inspection of installed mechanical equipment.
• Observe and approve Functional Tests, Equipment Run tests, etc.
• Participate in Safety Audits and Area Walk downs as part of acceptance list the Start-up.
• Review and approve procurement of required spare parts based on equipment criticality analyses.
• Receive and physically inspect delivered spare parts.
• Complete detailed Technical Feedback in SAP for future failure analysis
• Verify that required PM plans for equipment maintenance and preservation are executed as per procedures.
• Maintain equipment files that contain equipment datasheet, maintenance logbook, history and any other relevant records like calibration reports, checklist etc.
• Attend interface meetings with Project Teams and custodian departments to facilitate resolution of issues and promote good working relations.
• Participate in development and review of work instructions and check lists used for the execution of maintenance works.
• Ensure that mechanical equipment and systems on facilities can be operated in a safe and environmentally sound manner to comply with all applicable local laws and regulations in accordance with company guidelines and complex HSE policy and procedures.
• Conduct task risk assessment and responsible for maintaining safety at work location.
• Coordinate with different departments to ensure the timely completion of all maintenance jobs in the safest & effective manner.
• Maintain records of the work performed and progress, other related data, processes the paperwork related to the jobs and provides inputs for the monthly report.
• Perform time entry approval for the technicians collaborating with him.
• Ensures the work orders are properly confirmed and failure codes are put for all the jobs performed in SAP.
• Coordinate with all his team members the overall annual leave plan to have an even workforce distribution ensuring the minimum availability.
• Contribute to the evaluation of the contractor’s technicians before they join the team and follows-up their performance afterwards.
• Determine the training needs for the team members and trainees and ensures the adequate training on-the-job for their skill’s development.
• Initiate a Failure Report as per the criteria and support Engineers by giving inputs for the root cause failure analysis, improvement suggestions on chronic failures, spare parts management parameters, Preventive Maintenance plans, etc. and executes all the related actions assigned to him.
• Raise material reservations and assists in the receipt of materials and spare parts, helping to check the quality of the supplies. Ensure unused materials is returned to warehouse within define time.
• Responsible for segregation of repairable and non-repairable items, tagging, tracking, record keeping. and initiates actions for their refurbishment.
• Diploma or equivalent technical qualifications in Mechanical discipline.
• Good command, communication, and technical reporting writing skills in English Language.
• Minimum of 6 years of relevant experience in installation, repair, testing and maintenance of a wide range equipment items of production facilities in an oil/gas or petrochemical industry.
• Maintenance and troubleshooting experience on Rotating & Static Equipment in Oil & Gas.
• Hands on SAP basic work management operations related to maintenance.
• Hands on the documentation and reporting procedures for abnormal conditions.
• Working knowledge on Operation & Maintenance manuals and engineering documents/drawings. to troubleshoot and solve equipment problems and to determine optimum equipment functioning.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

The jobholder is responsible to supervise, coordinate, troubleshoot lead and administrate the Mechanical Maintenance team of Senior Technicians, composed by direct hires and contractors, doing installation and commissioning of equipment and execution of Predictive, Preventive, Proactive and Corrective Maintenance works on a wide range of rotating, static plant equipment and piping systems ensuring they are performed safely in time, with the required quality and in a manner to comply with all applicable local laws and regulations in accordance with company guidelines and HSE policy and procedures.

• Conduct equipment troubleshooting, decide on the corrective action and ensures that the right maintenance is done on the equipment needing repairing.
• Supervision of installation, repairing and maintenance jobs on a wide variety of equipment and systems covering all plants on site.
• Monitor the work execution checking the quality and following up the work progress ensuring the completion on time.
• Monitor and inspect the work of maintenance contractors conducting works on the plant to ensure compliance with specified terms and parameters.
• Ensure that the quality procedures, vendor/ OEM instructions, HSE requirements, etc. are available & followed by the job execution group.
• Inspect completed jobs for conformity to statutory and Company standards and regulations.
• Regularly inspect the workshops and other workplaces used by his team looking for a good housekeeping and a proper organization.
• Review regularly the tools distributed to his team, individual tools in the toolboxes and other, ensuring the return in time of the non-permanent tools, all the needed tools are available for the job execution and the normalization of all situations.
• Ensure that all members of the team have the proper PPEs and adhere to the HSE rules and ensure also that all effectively manages all waste.
• Perform regular toolbox talks to pass all type of information to the team of Technicians like HSE&Q and HR related, daily activity, etc.
• Discuss the daily maintenance and start-up schedule and the daily plan with the Planners and Operation teams to ensure optimum use of resources such as time, material, and labour.
• Ensure execution of scheduled pre-commissioning, commissioning and start-up maintenance and troubleshooting maintenance activities on large and complex equipment to ensure proper operating conditions of Company’s assets and adherence to international standards.
• Coordinate and provide technical support to shift personnel for any requirement related to job.
• Provide day to day instructions for safe job execution.
• Supervise mechanical maintenance jobs for the assigned plant area with objectives to minimize failures, reduce pre-commissioning, commissioning and start-up delays and ensure equipment reliability & availability.
• Perform Visual, Close and Detailed inspection of installed mechanical equipment.
• Observe and approve Functional Tests, Equipment Run tests, etc.
• Participate in Safety Audits and Area Walk downs as part of acceptance list the Start-up.
• Review and approve procurement of required spare parts based on equipment criticality analyses.
• Receive and physically inspect delivered spare parts.
• Complete detailed Technical Feedback in SAP for future failure analysis
• Verify that required PM plans for equipment maintenance and preservation are executed as per procedures.
• Maintain equipment files that contain equipment datasheet, maintenance logbook, history and any other relevant records like calibration reports, checklist etc.
• Attend interface meetings with Project Teams and custodian departments to facilitate resolution of issues and promote good working relations.
• Participate in development and review of work instructions and check lists used for the execution of maintenance works.
• Ensure that mechanical equipment and systems on facilities can be operated in a safe and environmentally sound manner to comply with all applicable local laws and regulations in accordance with company guidelines and complex HSE policy and procedures.
• Conduct task risk assessment and responsible for maintaining safety at work location.
• Coordinate with different departments to ensure the timely completion of all maintenance jobs in the safest & effective manner.
• Maintain records of the work performed and progress, other related data, processes the paperwork related to the jobs and provides inputs for the monthly report.
• Perform time entry approval for the technicians collaborating with him.
• Ensures the work orders are properly confirmed and failure codes are put for all the jobs performed in SAP.
• Coordinate with all his team members the overall annual leave plan to have an even workforce distribution ensuring the minimum availability.
• Contribute to the evaluation of the contractor’s technicians before they join the team and follows-up their performance afterwards.
• Determine the training needs for the team members and trainees and ensures the adequate training on-the-job for their skill’s development.
• Initiate a Failure Report as per the criteria and support Engineers by giving inputs for the root cause failure analysis, improvement suggestions on chronic failures, spare parts management parameters, Preventive Maintenance plans, etc. and executes all the related actions assigned to him.
• Raise material reservations and assists in the receipt of materials and spare parts, helping to check the quality of the supplies. Ensure unused materials is returned to warehouse within define time.
• Responsible for segregation of repairable and non-repairable items, tagging, tracking, record keeping. and initiates actions for their refurbishment.
• Diploma or equivalent technical qualifications in Mechanical discipline.
• Good command, communication, and technical reporting writing skills in English Language.
• Minimum of 6 years of relevant experience in installation, repair, testing and maintenance of a wide range equipment items of production facilities in an oil/gas or petrochemical industry.
• Maintenance and troubleshooting experience on Rotating & Static Equipment in Oil & Gas.
• Hands on SAP basic work management operations related to maintenance.
• Hands on the documentation and reporting procedures for abnormal conditions.
• Working knowledge on Operation & Maintenance manuals and engineering documents/drawings. to troubleshoot and solve equipment problems and to determine optimum equipment functioning.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

The jobholder is responsible to supervise, coordinate, troubleshoot lead and administrate the Mechanical Maintenance team of Senior Technicians, composed by direct hires and contractors, doing installation and commissioning of equipment and execution of Predictive, Preventive, Proactive and Corrective Maintenance works on a wide range of rotating, static plant equipment and piping systems ensuring they are performed safely in time, with the required quality and in a manner to comply with all applicable local laws and regulations in accordance with company guidelines and HSE policy and procedures.

• Conduct equipment troubleshooting, decide on the corrective action and ensures that the right maintenance is done on the equipment needing repairing.
• Supervision of installation, repairing and maintenance jobs on a wide variety of equipment and systems covering all plants on site.
• Monitor the work execution checking the quality and following up the work progress ensuring the completion on time.
• Monitor and inspect the work of maintenance contractors conducting works on the plant to ensure compliance with specified terms and parameters.
• Ensure that the quality procedures, vendor/ OEM instructions, HSE requirements, etc. are available & followed by the job execution group.
• Inspect completed jobs for conformity to statutory and Company standards and regulations.
• Regularly inspect the workshops and other workplaces used by his team looking for a good housekeeping and a proper organization.
• Review regularly the tools distributed to his team, individual tools in the toolboxes and other, ensuring the return in time of the non-permanent tools, all the needed tools are available for the job execution and the normalization of all situations.
• Ensure that all members of the team have the proper PPEs and adhere to the HSE rules and ensure also that all effectively manages all waste.
• Perform regular toolbox talks to pass all type of information to the team of Technicians like HSE&Q and HR related, daily activity, etc.
• Discuss the daily maintenance and start-up schedule and the daily plan with the Planners and Operation teams to ensure optimum use of resources such as time, material, and labour.
• Ensure execution of scheduled pre-commissioning, commissioning and start-up maintenance and troubleshooting maintenance activities on large and complex equipment to ensure proper operating conditions of Company’s assets and adherence to international standards.
• Coordinate and provide technical support to shift personnel for any requirement related to job.
• Provide day to day instructions for safe job execution.
• Supervise mechanical maintenance jobs for the assigned plant area with objectives to minimize failures, reduce pre-commissioning, commissioning and start-up delays and ensure equipment reliability & availability.
• Perform Visual, Close and Detailed inspection of installed mechanical equipment.
• Observe and approve Functional Tests, Equipment Run tests, etc.
• Participate in Safety Audits and Area Walk downs as part of acceptance list the Start-up.
• Review and approve procurement of required spare parts based on equipment criticality analyses.
• Receive and physically inspect delivered spare parts.
• Complete detailed Technical Feedback in SAP for future failure analysis
• Verify that required PM plans for equipment maintenance and preservation are executed as per procedures.
• Maintain equipment files that contain equipment datasheet, maintenance logbook, history and any other relevant records like calibration reports, checklist etc.
• Attend interface meetings with Project Teams and custodian departments to facilitate resolution of issues and promote good working relations.
• Participate in development and review of work instructions and check lists used for the execution of maintenance works.
• Ensure that mechanical equipment and systems on facilities can be operated in a safe and environmentally sound manner to comply with all applicable local laws and regulations in accordance with company guidelines and complex HSE policy and procedures.
• Conduct task risk assessment and responsible for maintaining safety at work location.
• Coordinate with different departments to ensure the timely completion of all maintenance jobs in the safest & effective manner.
• Maintain records of the work performed and progress, other related data, processes the paperwork related to the jobs and provides inputs for the monthly report.
• Perform time entry approval for the technicians collaborating with him.
• Ensures the work orders are properly confirmed and failure codes are put for all the jobs performed in SAP.
• Coordinate with all his team members the overall annual leave plan to have an even workforce distribution ensuring the minimum availability.
• Contribute to the evaluation of the contractor’s technicians before they join the team and follows-up their performance afterwards.
• Determine the training needs for the team members and trainees and ensures the adequate training on-the-job for their skill’s development.
• Initiate a Failure Report as per the criteria and support Engineers by giving inputs for the root cause failure analysis, improvement suggestions on chronic failures, spare parts management parameters, Preventive Maintenance plans, etc. and executes all the related actions assigned to him.
• Raise material reservations and assists in the receipt of materials and spare parts, helping to check the quality of the supplies. Ensure unused materials is returned to warehouse within define time.
• Responsible for segregation of repairable and non-repairable items, tagging, tracking, record keeping. and initiates actions for their refurbishment.
• Diploma or equivalent technical qualifications in Mechanical discipline.
• Good command, communication, and technical reporting writing skills in English Language.
• Minimum of 6 years of relevant experience in installation, repair, testing and maintenance of a wide range equipment items of production facilities in an oil/gas or petrochemical industry.
• Maintenance and troubleshooting experience on Rotating & Static Equipment in Oil & Gas.
• Hands on SAP basic work management operations related to maintenance.
• Hands on the documentation and reporting procedures for abnormal conditions.
• Working knowledge on Operation & Maintenance manuals and engineering documents/drawings. to troubleshoot and solve equipment problems and to determine optimum equipment functioning.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

The jobholder is responsible to supervise, coordinate, troubleshoot lead and administrate the Mechanical Maintenance team of Senior Technicians, composed by direct hires and contractors, doing installation and commissioning of equipment and execution of Predictive, Preventive, Proactive and Corrective Maintenance works on a wide range of rotating, static plant equipment and piping systems ensuring they are performed safely in time, with the required quality and in a manner to comply with all applicable local laws and regulations in accordance with company guidelines and HSE policy and procedures.

• Conduct equipment troubleshooting, decide on the corrective action and ensures that the right maintenance is done on the equipment needing repairing.
• Supervision of installation, repairing and maintenance jobs on a wide variety of equipment and systems covering all plants on site.
• Monitor the work execution checking the quality and following up the work progress ensuring the completion on time.
• Monitor and inspect the work of maintenance contractors conducting works on the plant to ensure compliance with specified terms and parameters.
• Ensure that the quality procedures, vendor/ OEM instructions, HSE requirements, etc. are available & followed by the job execution group.
• Inspect completed jobs for conformity to statutory and Company standards and regulations.
• Regularly inspect the workshops and other workplaces used by his team looking for a good housekeeping and a proper organization.
• Review regularly the tools distributed to his team, individual tools in the toolboxes and other, ensuring the return in time of the non-permanent tools, all the needed tools are available for the job execution and the normalization of all situations.
• Ensure that all members of the team have the proper PPEs and adhere to the HSE rules and ensure also that all effectively manages all waste.
• Perform regular toolbox talks to pass all type of information to the team of Technicians like HSE&Q and HR related, daily activity, etc.
• Discuss the daily maintenance and start-up schedule and the daily plan with the Planners and Operation teams to ensure optimum use of resources such as time, material, and labour.
• Ensure execution of scheduled pre-commissioning, commissioning and start-up maintenance and troubleshooting maintenance activities on large and complex equipment to ensure proper operating conditions of Company’s assets and adherence to international standards.
• Coordinate and provide technical support to shift personnel for any requirement related to job.
• Provide day to day instructions for safe job execution.
• Supervise mechanical maintenance jobs for the assigned plant area with objectives to minimize failures, reduce pre-commissioning, commissioning and start-up delays and ensure equipment reliability & availability.
• Perform Visual, Close and Detailed inspection of installed mechanical equipment.
• Observe and approve Functional Tests, Equipment Run tests, etc.
• Participate in Safety Audits and Area Walk downs as part of acceptance list the Start-up.
• Review and approve procurement of required spare parts based on equipment criticality analyses.
• Receive and physically inspect delivered spare parts.
• Complete detailed Technical Feedback in SAP for future failure analysis
• Verify that required PM plans for equipment maintenance and preservation are executed as per procedures.
• Maintain equipment files that contain equipment datasheet, maintenance logbook, history and any other relevant records like calibration reports, checklist etc.
• Attend interface meetings with Project Teams and custodian departments to facilitate resolution of issues and promote good working relations.
• Participate in development and review of work instructions and check lists used for the execution of maintenance works.
• Ensure that mechanical equipment and systems on facilities can be operated in a safe and environmentally sound manner to comply with all applicable local laws and regulations in accordance with company guidelines and complex HSE policy and procedures.
• Conduct task risk assessment and responsible for maintaining safety at work location.
• Coordinate with different departments to ensure the timely completion of all maintenance jobs in the safest & effective manner.
• Maintain records of the work performed and progress, other related data, processes the paperwork related to the jobs and provides inputs for the monthly report.
• Perform time entry approval for the technicians collaborating with him.
• Ensures the work orders are properly confirmed and failure codes are put for all the jobs performed in SAP.
• Coordinate with all his team members the overall annual leave plan to have an even workforce distribution ensuring the minimum availability.
• Contribute to the evaluation of the contractor’s technicians before they join the team and follows-up their performance afterwards.
• Determine the training needs for the team members and trainees and ensures the adequate training on-the-job for their skill’s development.
• Initiate a Failure Report as per the criteria and support Engineers by giving inputs for the root cause failure analysis, improvement suggestions on chronic failures, spare parts management parameters, Preventive Maintenance plans, etc. and executes all the related actions assigned to him.
• Raise material reservations and assists in the receipt of materials and spare parts, helping to check the quality of the supplies. Ensure unused materials is returned to warehouse within define time.
• Responsible for segregation of repairable and non-repairable items, tagging, tracking, record keeping. and initiates actions for their refurbishment.
• Diploma or equivalent technical qualifications in Mechanical discipline.
• Good command, communication, and technical reporting writing skills in English Language.
• Minimum of 6 years of relevant experience in installation, repair, testing and maintenance of a wide range equipment items of production facilities in an oil/gas or petrochemical industry.
• Maintenance and troubleshooting experience on Rotating & Static Equipment in Oil & Gas.
• Hands on SAP basic work management operations related to maintenance.
• Hands on the documentation and reporting procedures for abnormal conditions.
• Working knowledge on Operation & Maintenance manuals and engineering documents/drawings. to troubleshoot and solve equipment problems and to determine optimum equipment functioning.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

The jobholder is responsible to supervise, coordinate, troubleshoot lead and administrate the Mechanical Maintenance team of Senior Technicians, composed by direct hires and contractors, doing installation and commissioning of equipment and execution of Predictive, Preventive, Proactive and Corrective Maintenance works on a wide range of rotating, static plant equipment and piping systems ensuring they are performed safely in time, with the required quality and in a manner to comply with all applicable local laws and regulations in accordance with company guidelines and HSE policy and procedures.

• Conduct equipment troubleshooting, decide on the corrective action and ensures that the right maintenance is done on the equipment needing repairing.
• Supervision of installation, repairing and maintenance jobs on a wide variety of equipment and systems covering all plants on site.
• Monitor the work execution checking the quality and following up the work progress ensuring the completion on time.
• Monitor and inspect the work of maintenance contractors conducting works on the plant to ensure compliance with specified terms and parameters.
• Ensure that the quality procedures, vendor/ OEM instructions, HSE requirements, etc. are available & followed by the job execution group.
• Inspect completed jobs for conformity to statutory and Company standards and regulations.
• Regularly inspect the workshops and other workplaces used by his team looking for a good housekeeping and a proper organization.
• Review regularly the tools distributed to his team, individual tools in the toolboxes and other, ensuring the return in time of the non-permanent tools, all the needed tools are available for the job execution and the normalization of all situations.
• Ensure that all members of the team have the proper PPEs and adhere to the HSE rules and ensure also that all effectively manages all waste.
• Perform regular toolbox talks to pass all type of information to the team of Technicians like HSE&Q and HR related, daily activity, etc.
• Discuss the daily maintenance and start-up schedule and the daily plan with the Planners and Operation teams to ensure optimum use of resources such as time, material, and labour.
• Ensure execution of scheduled pre-commissioning, commissioning and start-up maintenance and troubleshooting maintenance activities on large and complex equipment to ensure proper operating conditions of Company’s assets and adherence to international standards.
• Coordinate and provide technical support to shift personnel for any requirement related to job.
• Provide day to day instructions for safe job execution.
• Supervise mechanical maintenance jobs for the assigned plant area with objectives to minimize failures, reduce pre-commissioning, commissioning and start-up delays and ensure equipment reliability & availability.
• Perform Visual, Close and Detailed inspection of installed mechanical equipment.
• Observe and approve Functional Tests, Equipment Run tests, etc.
• Participate in Safety Audits and Area Walk downs as part of acceptance list the Start-up.
• Review and approve procurement of required spare parts based on equipment criticality analyses.
• Receive and physically inspect delivered spare parts.
• Complete detailed Technical Feedback in SAP for future failure analysis
• Verify that required PM plans for equipment maintenance and preservation are executed as per procedures.
• Maintain equipment files that contain equipment datasheet, maintenance logbook, history and any other relevant records like calibration reports, checklist etc.
• Attend interface meetings with Project Teams and custodian departments to facilitate resolution of issues and promote good working relations.
• Participate in development and review of work instructions and check lists used for the execution of maintenance works.
• Ensure that mechanical equipment and systems on facilities can be operated in a safe and environmentally sound manner to comply with all applicable local laws and regulations in accordance with company guidelines and complex HSE policy and procedures.
• Conduct task risk assessment and responsible for maintaining safety at work location.
• Coordinate with different departments to ensure the timely completion of all maintenance jobs in the safest & effective manner.
• Maintain records of the work performed and progress, other related data, processes the paperwork related to the jobs and provides inputs for the monthly report.
• Perform time entry approval for the technicians collaborating with him.
• Ensures the work orders are properly confirmed and failure codes are put for all the jobs performed in SAP.
• Coordinate with all his team members the overall annual leave plan to have an even workforce distribution ensuring the minimum availability.
• Contribute to the evaluation of the contractor’s technicians before they join the team and follows-up their performance afterwards.
• Determine the training needs for the team members and trainees and ensures the adequate training on-the-job for their skill’s development.
• Initiate a Failure Report as per the criteria and support Engineers by giving inputs for the root cause failure analysis, improvement suggestions on chronic failures, spare parts management parameters, Preventive Maintenance plans, etc. and executes all the related actions assigned to him.
• Raise material reservations and assists in the receipt of materials and spare parts, helping to check the quality of the supplies. Ensure unused materials is returned to warehouse within define time.
• Responsible for segregation of repairable and non-repairable items, tagging, tracking, record keeping. and initiates actions for their refurbishment.
• Diploma or equivalent technical qualifications in Mechanical discipline.
• Good command, communication, and technical reporting writing skills in English Language.
• Minimum of 6 years of relevant experience in installation, repair, testing and maintenance of a wide range equipment items of production facilities in an oil/gas or petrochemical industry.
• Maintenance and troubleshooting experience on Rotating & Static Equipment in Oil & Gas.
• Hands on SAP basic work management operations related to maintenance.
• Hands on the documentation and reporting procedures for abnormal conditions.
• Working knowledge on Operation & Maintenance manuals and engineering documents/drawings. to troubleshoot and solve equipment problems and to determine optimum equipment functioning.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

The jobholder is responsible to supervise, coordinate, troubleshoot lead and administrate the Mechanical Maintenance team of Senior Technicians, composed by direct hires and contractors, doing installation and commissioning of equipment and execution of Predictive, Preventive, Proactive and Corrective Maintenance works on a wide range of rotating, static plant equipment and piping systems ensuring they are performed safely in time, with the required quality and in a manner to comply with all applicable local laws and regulations in accordance with company guidelines and HSE policy and procedures.

• Conduct equipment troubleshooting, decide on the corrective action and ensures that the right maintenance is done on the equipment needing repairing.
• Supervision of installation, repairing and maintenance jobs on a wide variety of equipment and systems covering all plants on site.
• Monitor the work execution checking the quality and following up the work progress ensuring the completion on time.
• Monitor and inspect the work of maintenance contractors conducting works on the plant to ensure compliance with specified terms and parameters.
• Ensure that the quality procedures, vendor/ OEM instructions, HSE requirements, etc. are available & followed by the job execution group.
• Inspect completed jobs for conformity to statutory and Company standards and regulations.
• Regularly inspect the workshops and other workplaces used by his team looking for a good housekeeping and a proper organization.
• Review regularly the tools distributed to his team, individual tools in the toolboxes and other, ensuring the return in time of the non-permanent tools, all the needed tools are available for the job execution and the normalization of all situations.
• Ensure that all members of the team have the proper PPEs and adhere to the HSE rules and ensure also that all effectively manages all waste.
• Perform regular toolbox talks to pass all type of information to the team of Technicians like HSE&Q and HR related, daily activity, etc.
• Discuss the daily maintenance and start-up schedule and the daily plan with the Planners and Operation teams to ensure optimum use of resources such as time, material, and labour.
• Ensure execution of scheduled pre-commissioning, commissioning and start-up maintenance and troubleshooting maintenance activities on large and complex equipment to ensure proper operating conditions of Company’s assets and adherence to international standards.
• Coordinate and provide technical support to shift personnel for any requirement related to job.
• Provide day to day instructions for safe job execution.
• Supervise mechanical maintenance jobs for the assigned plant area with objectives to minimize failures, reduce pre-commissioning, commissioning and start-up delays and ensure equipment reliability & availability.
• Perform Visual, Close and Detailed inspection of installed mechanical equipment.
• Observe and approve Functional Tests, Equipment Run tests, etc.
• Participate in Safety Audits and Area Walk downs as part of acceptance list the Start-up.
• Review and approve procurement of required spare parts based on equipment criticality analyses.
• Receive and physically inspect delivered spare parts.
• Complete detailed Technical Feedback in SAP for future failure analysis
• Verify that required PM plans for equipment maintenance and preservation are executed as per procedures.
• Maintain equipment files that contain equipment datasheet, maintenance logbook, history and any other relevant records like calibration reports, checklist etc.
• Attend interface meetings with Project Teams and custodian departments to facilitate resolution of issues and promote good working relations.
• Participate in development and review of work instructions and check lists used for the execution of maintenance works.
• Ensure that mechanical equipment and systems on facilities can be operated in a safe and environmentally sound manner to comply with all applicable local laws and regulations in accordance with company guidelines and complex HSE policy and procedures.
• Conduct task risk assessment and responsible for maintaining safety at work location.
• Coordinate with different departments to ensure the timely completion of all maintenance jobs in the safest & effective manner.
• Maintain records of the work performed and progress, other related data, processes the paperwork related to the jobs and provides inputs for the monthly report.
• Perform time entry approval for the technicians collaborating with him.
• Ensures the work orders are properly confirmed and failure codes are put for all the jobs performed in SAP.
• Coordinate with all his team members the overall annual leave plan to have an even workforce distribution ensuring the minimum availability.
• Contribute to the evaluation of the contractor’s technicians before they join the team and follows-up their performance afterwards.
• Determine the training needs for the team members and trainees and ensures the adequate training on-the-job for their skill’s development.
• Initiate a Failure Report as per the criteria and support Engineers by giving inputs for the root cause failure analysis, improvement suggestions on chronic failures, spare parts management parameters, Preventive Maintenance plans, etc. and executes all the related actions assigned to him.
• Raise material reservations and assists in the receipt of materials and spare parts, helping to check the quality of the supplies. Ensure unused materials is returned to warehouse within define time.
• Responsible for segregation of repairable and non-repairable items, tagging, tracking, record keeping. and initiates actions for their refurbishment.
• Diploma or equivalent technical qualifications in Mechanical discipline.
• Good command, communication, and technical reporting writing skills in English Language.
• Minimum of 6 years of relevant experience in installation, repair, testing and maintenance of a wide range equipment items of production facilities in an oil/gas or petrochemical industry.
• Maintenance and troubleshooting experience on Rotating & Static Equipment in Oil & Gas.
• Hands on SAP basic work management operations related to maintenance.
• Hands on the documentation and reporting procedures for abnormal conditions.
• Working knowledge on Operation & Maintenance manuals and engineering documents/drawings. to troubleshoot and solve equipment problems and to determine optimum equipment functioning.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

The jobholder is responsible to supervise, coordinate, troubleshoot lead and administrate the Mechanical Maintenance team of Senior Technicians, composed by direct hires and contractors, doing installation and commissioning of equipment and execution of Predictive, Preventive, Proactive and Corrective Maintenance works on a wide range of rotating, static plant equipment and piping systems ensuring they are performed safely in time, with the required quality and in a manner to comply with all applicable local laws and regulations in accordance with company guidelines and HSE policy and procedures.

• Conduct equipment troubleshooting, decide on the corrective action and ensures that the right maintenance is done on the equipment needing repairing.
• Supervision of installation, repairing and maintenance jobs on a wide variety of equipment and systems covering all plants on site.
• Monitor the work execution checking the quality and following up the work progress ensuring the completion on time.
• Monitor and inspect the work of maintenance contractors conducting works on the plant to ensure compliance with specified terms and parameters.
• Ensure that the quality procedures, vendor/ OEM instructions, HSE requirements, etc. are available & followed by the job execution group.
• Inspect completed jobs for conformity to statutory and Company standards and regulations.
• Regularly inspect the workshops and other workplaces used by his team looking for a good housekeeping and a proper organization.
• Review regularly the tools distributed to his team, individual tools in the toolboxes and other, ensuring the return in time of the non-permanent tools, all the needed tools are available for the job execution and the normalization of all situations.
• Ensure that all members of the team have the proper PPEs and adhere to the HSE rules and ensure also that all effectively manages all waste.
• Perform regular toolbox talks to pass all type of information to the team of Technicians like HSE&Q and HR related, daily activity, etc.
• Discuss the daily maintenance and start-up schedule and the daily plan with the Planners and Operation teams to ensure optimum use of resources such as time, material, and labour.
• Ensure execution of scheduled pre-commissioning, commissioning and start-up maintenance and troubleshooting maintenance activities on large and complex equipment to ensure proper operating conditions of Company’s assets and adherence to international standards.
• Coordinate and provide technical support to shift personnel for any requirement related to job.
• Provide day to day instructions for safe job execution.
• Supervise mechanical maintenance jobs for the assigned plant area with objectives to minimize failures, reduce pre-commissioning, commissioning and start-up delays and ensure equipment reliability & availability.
• Perform Visual, Close and Detailed inspection of installed mechanical equipment.
• Observe and approve Functional Tests, Equipment Run tests, etc.
• Participate in Safety Audits and Area Walk downs as part of acceptance list the Start-up.
• Review and approve procurement of required spare parts based on equipment criticality analyses.
• Receive and physically inspect delivered spare parts.
• Complete detailed Technical Feedback in SAP for future failure analysis
• Verify that required PM plans for equipment maintenance and preservation are executed as per procedures.
• Maintain equipment files that contain equipment datasheet, maintenance logbook, history and any other relevant records like calibration reports, checklist etc.
• Attend interface meetings with Project Teams and custodian departments to facilitate resolution of issues and promote good working relations.
• Participate in development and review of work instructions and check lists used for the execution of maintenance works.
• Ensure that mechanical equipment and systems on facilities can be operated in a safe and environmentally sound manner to comply with all applicable local laws and regulations in accordance with company guidelines and complex HSE policy and procedures.
• Conduct task risk assessment and responsible for maintaining safety at work location.
• Coordinate with different departments to ensure the timely completion of all maintenance jobs in the safest & effective manner.
• Maintain records of the work performed and progress, other related data, processes the paperwork related to the jobs and provides inputs for the monthly report.
• Perform time entry approval for the technicians collaborating with him.
• Ensures the work orders are properly confirmed and failure codes are put for all the jobs performed in SAP.
• Coordinate with all his team members the overall annual leave plan to have an even workforce distribution ensuring the minimum availability.
• Contribute to the evaluation of the contractor’s technicians before they join the team and follows-up their performance afterwards.
• Determine the training needs for the team members and trainees and ensures the adequate training on-the-job for their skill’s development.
• Initiate a Failure Report as per the criteria and support Engineers by giving inputs for the root cause failure analysis, improvement suggestions on chronic failures, spare parts management parameters, Preventive Maintenance plans, etc. and executes all the related actions assigned to him.
• Raise material reservations and assists in the receipt of materials and spare parts, helping to check the quality of the supplies. Ensure unused materials is returned to warehouse within define time.
• Responsible for segregation of repairable and non-repairable items, tagging, tracking, record keeping. and initiates actions for their refurbishment.
• Diploma or equivalent technical qualifications in Mechanical discipline.
• Good command, communication, and technical reporting writing skills in English Language.
• Minimum of 6 years of relevant experience in installation, repair, testing and maintenance of a wide range equipment items of production facilities in an oil/gas or petrochemical industry.
• Maintenance and troubleshooting experience on Rotating & Static Equipment in Oil & Gas.
• Hands on SAP basic work management operations related to maintenance.
• Hands on the documentation and reporting procedures for abnormal conditions.
• Working knowledge on Operation & Maintenance manuals and engineering documents/drawings. to troubleshoot and solve equipment problems and to determine optimum equipment functioning.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Far much that one rank beheld bluebird after outside ignobly allegedly more when oh arrogantly vehement irresistibly fussy penguin insect additionally wow absolutely crud meretriciously.

Bachelor of Technology/Engineering(Mechanical)

Nationality

Any Nationality

Any

Vacancy

1 Vacancy

Job Description

Role Overview:

We are seeking a Mechanical Maintenance Engineer with hands-on expertise in mechanical system maintenance, reliability engineering, and advanced predictive analytics using IIoT and statistical models to optimize equipment performance and reduce downtime.

Key Responsibilities:

Core Maintenance Activities:

• Perform preventive, predictive, and breakdown maintenance of rotating and static equipment such as pumps, compressors, gearboxes, furnace, conveyors, and hydraulic/pneumatic systems.
• Conduct shaft alignment, bearing lubrication, and vibration analysis to prevent premature failures.
• Oversee installation, commissioning, and maintenance of mechanical equipment.
• Identify and resolve wear & tear issues, misalignments, unbalanced loads, and cavitation problems.
• Optimize the performance of cooling systems, boilers, and heat exchangers.

Predictive & IIoT-Based Maintenance:

• Implement vibration analysis, ultrasonic detection, and oil analysis to predict failures.
• Utilize IIoT-based sensors for real-time monitoring of machine health parameters such as temperature, pressure, and stress levels.
• Develop failure mode and effects analysis (FMEA) models to predict component failures.
• Apply Machine Learning (ML) models for trend analysis and anomaly detection in mechanical systems.

Industry Compliance & Documentation:

• Ensure compliance with ISO 55001 (Asset Management) and OSHA safety regulations.
• Maintain historical maintenance data, CMMS (computerized maintenance management system) records, and predictive maintenance logs.
• Train technicians on advanced diagnostic tools, AI-driven maintenance, and reliability-cantered maintenance (RCM).

Desired Candidate Profile

Requirements:

• Bachelor in Mechanical Engineering + MBA (is a plus)
• ~ 5 years of experience in mechanical maintenance in a manufacturing/industrial setup.
• Expertise in condition monitoring, predictive maintenance, and asset reliability optimization.
• Experience with IIoT, AI-driven predictive analytics, and statistical modelling.

Proficiency in vibration analysis, thermography, and hydraulic system troubleshooting

Employment Type

Full Time

Company Industry

Department / Functional Area

• Maintenance
• Operations

Keywords

• Maintenance Engineer
• Mechanical Maintenance Engineer
• Mechanical System
• Reliability Engineering
• IIoT
• Preventive
• Predictive
• Rotating Equpment
• Static Equipment
• Pumps
• Compressors
• Gearboxes
• Maintenance

Disclaimer: Naukrigulf.com is only a platform to bring jobseekers & employers together. Applicants are advised to research the bonafides of the prospective employer independently. We do NOT endorse any requests for money payments and strictly advice against sharing personal or bank related information. We also recommend you visit Security Advice for more information. If you suspect any fraud or malpractice, email us at