10 Plant Operators jobs in Abu Dhabi
Machine Equipment Operator
Posted today
Job Viewed
Job Description
Key Responsibilities:
• Operate Extrusion machines according to established procedures and guidelines.
• Monitor machine performance, make adjustments in consultation with supervisors or production incharge.
• Ensure proper setup of machines before production runs including loading materials, adjusting settings and ensuring tooling is in place.
• Supervise inspection of finished products to ensure quality standards are met.
• Report any defects or issues to supervisors or QC immediately.
• Perform basic maintenance tasks such as lubricating, replacing worn parts, troubleshooting and minor repairs when needed.
Required Skills and Qualifications:
• 3-5 years experience preferably in factory setup.
Benefits:
• Opportunities for professional growth and development.
Heavy Equipment Operator
Posted 12 days ago
Job Viewed
Job Description
To maintain and repair sections of the following: roads, streets, curbs, surface mats, membranes, drainage structures, as well as other improved areas using appropriate paving and/or surfacing procedures; interpret construction drawings and surveys using information such as subgrade contours and grade alignment; and shall provide erosion control.
**Essential Responsibilities:**
+ Meet heavy equipment requirements on a government contract on a military installation.
+ Determine type and application of equipment to use in various maintenance and repair operations; operate construction equipment to finish grade, level, slope, and compact construction materials.
+ Ability to investigate proposed work sites to determine resource requirements, plan and estimate jobs, coordinate and plan work requirements with other civil engineering and base agencies and inspect work to ensure quality and compliance with policies, regulations, and other publications.
+ Maintain, and repair graded roads, graveled roads and acreage, open ditches, drainage, foundations and slabs on grade.
+ Possess experience in chain link fence construction and repair.
**Minimum Position Knowledge, Skills and Abilities Required:**
+ High school diploma or general education degree (GED) is required.
+ Minimum five (5) years of recent heavy equipment experience gained either in military or commercial application.
+ Must have either performed or supervised construction equipment operation, special techniques in using construction equipment to prepare sites for constructing and maintaining asphalt roads and grounds, concrete work, soil stabilization, and rigid and flexible pavement construction and maintenance.
+ Must have at least one of the following qualifications: OSHA Certified Crane Operator (29 CFR 1926.1427), minimum two years of experience on 100-ton crane, Certified Forklift Operator, Certified Front-End Loader, Certified CTL Skid Steer Operator, Certified Excavator Operator, Certified Street Sweeper Operator or experienced in chain link fence construction and repair.
+ Must possess basis skills in computer operations.
+ Must have ability to read, interpret and apply TM instructions, publications, and safety rules.
+ Must possess and maintain a valid CDL driver's license and be able to operate a government general-purpose vehicle.
+ Must be able to obtain and maintain a Secret Clearance US Government Clearance. Note: US Citizenship is required to obtain a Secret Clearance.
**Work Environment, Physical Demands, and Mental Demands:**
While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear. The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl and work in tiring and uncomfortable positions. The employee is occasionally required to sit, climb or balance, and taste or smell. Frequently lifts items weighing 40-45 pounds and occasionally in excess of 50 pounds. The employee is frequently exposed to moving mechanical parts, extreme heat, and vibration. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold; and risk of electrical shock. The noise level in the work environment is usually loud, or may include unsafe conditions, questioning nonstandard operations or environmental factors that may involve unmitigated hazards, and providing feedback to supervisors and managers on all safety issues. Living and working conditions at the assignment location could be remote and uncomfortable. Long hours, exposure to weather and hazardous conditions.
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters ( .
Industrial Equipment Operator
Posted today
Job Viewed
Job Description
The position of Production Specialist is responsible for the startup, operation, and maintenance of industrial equipment under controlled conditions.
This individual will ensure adherence to production standards while maintaining a clean and efficient work environment.
Machine Operator
Posted today
Job Viewed
Job Description
Perform duties and responsibilities on Extrusion machine as assigned by the Plant supervisor or Production Incharge.
Machine Setup: Take lead in setting up machines before production runs including loading materials, adjusting settings, and ensuring proper tooling is in place.
Machine Operation: Operate machinery according to established procedures, guidelines, and safety protocols. Monitor machine performance and make adjustments in consultation with Plant Supervisor / Production Incharge.
Quality Control: Supervise inspection of finished products to ensure they meet quality standards and specifications. Report any defects or issues to Production Incharge / QC immediately.
Maintenance: Perform basic maintenance tasks such as lubricating and replacing worn parts, troubleshooting, and minor repairs when needed.
Experience: 3-5 years experience preferably in factory setup.
#J-18808-LjbffrCNC Machine Operator
Posted today
Job Viewed
Job Description
Select how often (in days) to receive an alert: Create Alert
EPI is a key contributor of precision engineering to global Aerospace, Defense, and Oil & Gas industries. We provide solutions with industry-specific standards, and our focus is on building precision manufacturing infrastructure. EPI is fully equipped for machining, manufacturing engineering, surface treatment, coating, repairing, and cutting tools and assemblies.
Key Responsibilities
- Set-up and manage CNC machines to perform different jobs including drilling, grinding and milling & turning.
- Translate engineering drawings and requirements into dimensions for production.
- Ensure the CNC machine operates in accordance with the guidelines of the company.
- Oversee the machines while they execute the tasks and make the necessary changes to produce improved results.
- Load and unload raw materials and equipment.
- Record all machine related actions by completing production and quality logs, keeping detailed records for equipment and procedures.
- Perform necessary maintenance, Coolant Monitoring and cleaning of equipmentdaily.
- Inspect finished product to ensure that results of machining process align with clientexpectations.
- Communicate effectively logistics issues that arise in the process of producing apart.
- Conduct regular CNC machineassessments.
- Remove tabs, perform Deburring and engraving as per Work Instructions.
- Perform general machine trouble shooting to minimize down time.
- Perform In- Process Measurement and Visual Inspection to ensure the quality of product meets customer requirements.
- Fill in all controlled required documents and SFC data entry including down time on daily basis.
- Monitor scrap levels against the parts produced under your responsibility and highlight if levels exceed average.
- Set up cutting tools as per Cutting tool list, using a heat shrink fit, dynamic tool balancer, to ensure tools are in line with the drawing requirement.
- Changeover for all jobs in legacy production.
- Verify operations or sequences to ensure completion and accuracy, by stamping the relevant shop traveler sequence.
Qualifications and Skills
- Trade School Accreditation/High School diploma or equivalent qualification.
- Certificate or diploma in Engineering is an advantage.
- Abide by company safetyguidelines.
- Work productively and efficiently.
- Maintain housekeeping and 5S under the area of responsibility.
Experience
- Minimum of 3 years’ experience as a CNC Milling machine operator or CNC Machinist in Machining /Manufacturing Industry.
- Proven experience translating mechanical documents and engineeringdrawings.
Machine Operator Position
Posted today
Job Viewed
Job Description
**Job Role:** Mechanic (PLT)
We are seeking a skilled mechanic to join our team. The successful candidate will work on the service and repair of diesel welders, pipe profiling machines, crawler/rough terrain/overhead cranes, pumps, portable generators, air compressors, and other mechanical equipment.
The ideal candidate will have experience working in a team environment and be able to adhere to health and safety standards. Additional offshore duties may include repair and maintenance of pipe lay equipment, winches, derrick cranes, drilling units, and pile hammers.
Requirements- A secondary school certificate or equivalent followed by a trade certificate from an accredited trade school.
- A minimum of 4-6 years of relevant experience in the mechanical equipment field.
- Good written and spoken English skills, with the ability to use parts and workshop manuals effectively.
Machine Operator (Defeathering)
Posted 74 days ago
Job Viewed
Job Description
Be The First To Know
About the latest Plant operators Jobs in Abu Dhabi !
Machine Operator (Before Scalding)
Posted 67 days ago
Job Viewed
Job Description
Concrete Ready-Mix Plant Operator
Posted 26 days ago
Job Viewed
Job Description
We're a leading readymix concrete company seeking a skilled and reliable Plant Operator to join our dynamic team in Abu Dhabi. The successful candidate will be responsible for operating and maintaining machinery and equipment to ensure smooth production processes while adhering to safety and quality standards. Responsibilities: - Operate and maintain plant equipment, including batching systems and mixers - Monitor production processes, ensuring compliance with company standards and specifications - Conduct regular quality control checks on raw materials and finished products - Collaborate with site personnel to meet customer demands and delivery schedules - Perform routine maintenance and troubleshooting on plant equipment - Maintain accurate records and reports, including production and quality control data - Adhere to safety protocols and company policies
Requirements
- 2+ years of experience in a similar role, preferably in the construction or readymix concrete industry - Strong knowledge of concrete production processes and quality control measures - Ability to work independently and make decisions in a fast-paced environment - Basic mechanical skills and ability to perform routine maintenance - Physical stamina to work in a plant environment - Good communication skills and ability to work with site personnel Preferred Qualifications: - Certificate or diploma in a related field, such as construction or engineering - Experience with automated batching systems and mixers If you're a motivated and experienced professional looking for a new challenge, please submit your resume and cover letter. We look forward to hearing from you!
About the company
GT Ready mix (Guangtong) Trading LLC is a leading UAE-based supplier of high-quality readymix concrete to vendors in the construction industry. Our mission is to provide reliable and efficient concrete solutions, meeting the demands of our clients with precision and expertise. With a focus on quality, safety, and customer satisfaction, we strive to build strong partnerships with our vendors and contribute to the growth of the UAE's construction sector.
Trainee Process Operator Bagging Machine
Posted today
Job Viewed
Job Description
Black Grey HR is recruiting for a well-reputed Food Manufacturing Company in the UAE. Our client is looking for a Trainee Process Operator to manage the automatic whole chicken bagging machine. The ideal candidate will have a strong background in meat and poultry production with hands-on experience in equipment operation, and a strong commitment to food safety, quality, and productivity standards.
Key Responsibilities- Operate the automatic whole chicken bagging machine and support complex production line tasks.
- Understand and follow all safety, quality, and operational procedures.
- Read and interpret technical manuals for complex equipment.
- Perform routine machine checks and preventive maintenance tasks.
- Assemble equipment and prepare materials before production begins.
- Monitor machine performance and adjust parameters as needed.
- Participate in troubleshooting and assist with minor maintenance tasks.
- Report any safety, food safety, or quality concerns immediately.
- Support the production schedule and assist the supervisor in achieving targets.
- Fill out control charts for performance tracking and productivity systems.
- Manage material ordering and usage.
- Prevent product loss and minimize waste generation.
- Reduce scrap and rework through process optimization.
- Minimum 7 years of production experience in the Meat/Poultry Processing Industry.
- Minimum 5 years as an Operator/Technician in multinational companies.
- Diploma or High School qualification.
- Proficient in English (verbal and written).
- Competitive salary package.
- Opportunity to work with a leading food manufacturing company.
- Career growth and development opportunities.
- Dynamic and professional work environment.