54 Production Technician jobs in the United Arab Emirates

**Purpose and Scope:**
The Contractor shall provide OM&R support for all generators, automatic transfer switched (ATS), synchronization gears and light carts, refueling support services to enable refueling of all operational generators on an ongoing basis. The Contractor shall provide inspections, maintenance as required. In addition, the Contractor shall perform facility management and maintenance and repair for fuel systems supporting facility stationery and emergency back-up generators.
**Essential Responsibilities:**
The Contractor shall use all USG provided generators, transformers, switchgears, fuel tanks, cabling and any other equipment needed to support the government's requests of spot generators providing prime power for mission requirements. Additionally, in order to minimize mission impact due to power outages caused by routine maintenance or unexpected equipment failure, the Contractor shall utilize USG provided back-up generators to meet the performance objectives of providing reliable and continuous prime power support and no scheduled power outages longer than one (1) hour.
The Contractor shall:
Install, remove, and operate electrical power generating and control systems, automatic or manual transfer switches and associated equipment with proper technical skills.
Check equipment for serviceability; position equipment such as gasoline and diesel engines, generators, switchgear, air compressors, and other power generating auxiliary equipment.
Check installed equipment to ensure compliance with publications, policies, and directives.
Inspect, test, and service component systems such as safety, fuel, lubrication, cooling, and air pressure, pumps, regulators, governors, and accessory equipment.
Observe and interpret instruments such as ammeters, voltmeters, frequency meters, synchro scopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges.
Adjust engine generator systems to maintain proper voltage, current, frequency, and synchronization; synchronize multiple generators when needed.
The Contractor shall operate medium and low voltage generators as required. Operations of the electric generators include start-up, transfer of load, generation, and shutdown of all associated electric power equipment. Operations responsibilities include monitoring and adjusting generator and electrical output performance as required; ensuring adequate stores of fuel are available for continuous operation of the plants; switching operating generators to maintain electrical output while permitting servicing on generators taken off line. Duties include observation of key and critical operational parameters and taking appropriate measures in the event of out-of-tolerance conditions. For locations where generators are providing prime power, performance of these duties must be on a 24-hour a day, 7-day week shift schedule, if continuous power is required. The Contractor shall use technical orders, where applicable, and employ good commercial practices in all generator operations, including use of AFMAN 32-1062, applicable UFCs, manufacturer instructions, industry standards, and environmental/occupational safety requirements.
Perform all other position related duties as assigned or requested.
**Minimum Position Knowledge, Skills, and Abilities Required:**
High school diploma or equivalent training/experience and a valid driver's license. The technician shall have a minimum of five (5) years' experience in the electrical power generation field. The technician manages resources and activities devoted to installation, operation, maintenance, and repair of electrical power generating and control systems. The technician shall have knowledge of: Principles of electronics and electricity, including generation, conversion, transformation, distribution, and utilization; types, capacity, and purpose of low voltage circuits, circuit breakers, switches (automatic/manual type), fuses, regulators, relays, instruments, and meters associated with electric generation and distribution; interpreting instrument and meter readings; wiring diagrams, schematics, drawings and technical publications; techniques of operating and maintaining internal combustion engines, generators, generating plants, distribution panels, and accessory equipment; use and purpose of test equipment; safety rules and practices; grounding practices, environmental policies; principles of management; and operation and repair of electrical power production systems. Experience with operating and maintaining generators ranging from 5 to 4,300 kilowatts desired. All technicians shall be power production journeyman or master technicians.
Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for facility credentials/authorization at this work location.
**Work Environment, Physical Demands, and Mental Demands:**
While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or fee; and talk or hear. The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit, climb or balance, and taste or smell. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, and ability to adjust focus. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and extreme heat. The employee is regularly exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold; and risk of electrical shock. The noise level in the work environment is usually loud, or may include unsafe conditions, questioning nonstandard operations or environmental factors that may involve unmitigated hazards, and providing feedback to supervisors and managers on all safety issues.
**Other Responsibilities:**
Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.
Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.
Procedure Compliance - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran's status, ancestry, sexual orientation, gender identity, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal EEO laws and supplemental language at EEO including Disability/Protected Veterans ( and Labor Laws Posters ( .

**Purpose and Scope:**
The Contractor shall provide OM&R support for all generators, automatic transfer switched (ATS), synchronization gears and light carts, refueling support services to enable refueling of all operational generators on an ongoing basis. The Contractor shall provide inspections, maintenance as required. In addition, the Contractor shall perform facility management and maintenance and repair for fuel systems supporting facility stationery and emergency back-up generators.
**Essential Responsibilities:**
The Contractor shall use all USG provided generators, transformers, switchgears, fuel tanks, cabling and any other equipment needed to support the government's requests of spot generators providing prime power for mission requirements. Additionally, in order to minimize mission impact due to power outages caused by routine maintenance or unexpected equipment failure, the Contractor shall utilize USG provided back-up generators to meet the performance objectives of providing reliable and continuous prime power support and no scheduled power outages longer than one (1) hour.
The Contractor shall:
Install, remove, and operate electrical power generating and control systems, automatic or manual transfer switches and associated equipment with proper technical skills.
Check equipment for serviceability; position equipment such as gasoline and diesel engines, generators, switchgear, air compressors, and other power generating auxiliary equipment.
Check installed equipment to ensure compliance with publications, policies, and directives.
Inspect, test, and service component systems such as safety, fuel, lubrication, cooling, and air pressure, pumps, regulators, governors, and accessory equipment.
Observe and interpret instruments such as ammeters, voltmeters, frequency meters, synchro scopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges.
Adjust engine generator systems to maintain proper voltage, current, frequency, and synchronization; synchronize multiple generators when needed.
The Contractor shall operate medium and low voltage generators as required. Operations of the electric generators include start-up, transfer of load, generation, and shutdown of all associated electric power equipment. Operations responsibilities include monitoring and adjusting generator and electrical output performance as required; ensuring adequate stores of fuel are available for continuous operation of the plants; switching operating generators to maintain electrical output while permitting servicing on generators taken off line. Duties include observation of key and critical operational parameters and taking appropriate measures in the event of out-of-tolerance conditions. For locations where generators are providing prime power, performance of these duties must be on a 24-hour a day, 7-day week shift schedule, if continuous power is required. The Contractor shall use technical orders, where applicable, and employ good commercial practices in all generator operations, including use of AFMAN 32-1062, applicable UFCs, manufacturer instructions, industry standards, and environmental/occupational safety requirements.
Perform all other position related duties as assigned or requested.
**Minimum Position Knowledge, Skills, and Abilities Required:**
+ High school diploma or equivalent training/experience and a valid driver's license
+ Minimum of five (5) years' experience in the electrical power generation field
+ Ability to manage resources and activities devoted to installation, operation, maintenance, and repair of electrical power generating and control systems
+ Must have knowledge of: Principles of electronics and electricity, including generation, conversion, transformation, distribution, and utilization; types, capacity, and purpose of low voltage circuits, circuit breakers, switches (automatic/manual type), fuses, regulators, relays, instruments, and meters associated with electric generation and distribution; interpreting instrument and meter readings; wiring diagrams, schematics, drawings and technical publications; techniques of operating and maintaining internal combustion engines, generators, generating plants, distribution panels, and accessory equipment; use and purpose of test equipment; safety rules and practices; grounding practices, environmental policies; principles of management; and operation and repair of electrical power production systems
+ Must be power production journeyman or master technicians
+ Experience with operating and maintaining generators ranging from 5 to 4,300 kilowatts desired
+ Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for facility credentials/authorization at this work location.
**Work Environment, Physical Demands, and Mental Demands:**
While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or fee; and talk or hear. The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit, climb or balance, and taste or smell. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, and ability to adjust focus. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and extreme heat. The employee is regularly exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold; and risk of electrical shock. The noise level in the work environment is usually loud, or may include unsafe conditions, questioning nonstandard operations or environmental factors that may involve unmitigated hazards, and providing feedback to supervisors and managers on all safety issues.
**Other Responsibilities:**
Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.
Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.
Procedure Compliance - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran's status, ancestry, sexual orientation, gender identity, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal EEO laws and supplemental language at EEO including Disability/Protected Veterans ( and Labor Laws Posters ( .

**Purpose and Scope:**
The Contractor shall provide OM&R support for all generators, automatic transfer switched (ATS), synchronization gears and light carts, refueling support services to enable refueling of all operational generators on an ongoing basis. The Contractor shall provide inspections, maintenance as required. In addition, the Contractor shall perform facility management and maintenance and repair for fuel systems supporting facility stationery and emergency back-up generators.
**Essential Responsibilities:**
The Contractor shall use all USG provided generators, transformers, switchgears, fuel tanks, cabling and any other equipment needed to support the government's requests of spot generators providing prime power for mission requirements. Additionally, in order to minimize mission impact due to power outages caused by routine maintenance or unexpected equipment failure, the Contractor shall utilize USG provided back-up generators to meet the performance objectives of providing reliable and continuous prime power support and no scheduled power outages longer than one (1) hour.
The Contractor shall:
Install, remove, and operate electrical power generating and control systems, automatic or manual transfer switches and associated equipment with proper technical skills.
Check equipment for serviceability; position equipment such as gasoline and diesel engines, generators, switchgear, air compressors, and other power generating auxiliary equipment.
Check installed equipment to ensure compliance with publications, policies, and directives.
Inspect, test, and service component systems such as safety, fuel, lubrication, cooling, and air pressure, pumps, regulators, governors, and accessory equipment.
Observe and interpret instruments such as ammeters, voltmeters, frequency meters, synchro scopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges.
Adjust engine generator systems to maintain proper voltage, current, frequency, and synchronization; synchronize multiple generators when needed.
The Contractor shall operate medium and low voltage generators as required. Operations of the electric generators include start-up, transfer of load, generation, and shutdown of all associated electric power equipment. Operations responsibilities include monitoring and adjusting generator and electrical output performance as required; ensuring adequate stores of fuel are available for continuous operation of the plants; switching operating generators to maintain electrical output while permitting servicing on generators taken off line. Duties include observation of key and critical operational parameters and taking appropriate measures in the event of out-of-tolerance conditions. For locations where generators are providing prime power, performance of these duties must be on a 24-hour a day, 7-day week shift schedule, if continuous power is required. The Contractor shall use technical orders, where applicable, and employ good commercial practices in all generator operations, including use of AFMAN 32-1062, applicable UFCs, manufacturer instructions, industry standards, and environmental/occupational safety requirements.
Perform all other position related duties as assigned or requested.
**Minimum Position Knowledge, Skills, and Abilities Required:**
High school diploma or equivalent training/experience and a valid driver's license. The technician shall have a minimum of five (5) years' experience in the electrical power generation field. The technician manages resources and activities devoted to installation, operation, maintenance, and repair of electrical power generating and control systems. The technician shall have knowledge of: Principles of electronics and electricity, including generation, conversion, transformation, distribution, and utilization; types, capacity, and purpose of low voltage circuits, circuit breakers, switches (automatic/manual type), fuses, regulators, relays, instruments, and meters associated with electric generation and distribution; interpreting instrument and meter readings; wiring diagrams, schematics, drawings and technical publications; techniques of operating and maintaining internal combustion engines, generators, generating plants, distribution panels, and accessory equipment; use and purpose of test equipment; safety rules and practices; grounding practices, environmental policies; principles of management; and operation and repair of electrical power production systems. Experience with operating and maintaining generators ranging from 5 to 4,300 kilowatts desired. All technicians shall be power production journeyman or master technicians.
Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for facility credentials/authorization at this work location.
**Work Environment, Physical Demands, and Mental Demands:**
While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or fee; and talk or hear. The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit, climb or balance, and taste or smell. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, and ability to adjust focus. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and extreme heat. The employee is regularly exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold; and risk of electrical shock. The noise level in the work environment is usually loud, or may include unsafe conditions, questioning nonstandard operations or environmental factors that may involve unmitigated hazards, and providing feedback to supervisors and managers on all safety issues.
**Other Responsibilities:**
Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.
Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.
Procedure Compliance - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters ( .

Purpose and Scope :

The Contractor shall provide OM&R support for all generators, automatic transfer switched (ATS), synchronization gears and light carts, refueling support services to enable refueling of all operational generators on an ongoing basis. The Contractor shall provide inspections, maintenance as required. In addition, the Contractor shall perform facility management and maintenance and repair for fuel systems supporting facility stationery and emergency back-up generators.

Essential Responsibilities :

The Contractor shall use all USG provided generators, transformers, switchgears, fuel tanks, cabling and any other equipment needed to support the government's requests of spot generators providing prime power for mission requirements. Additionally, in order to minimize mission impact due to power outages caused by routine maintenance or unexpected equipment failure, the Contractor shall utilize USG provided back-up generators to meet the performance objectives of providing reliable and continuous prime power support and no scheduled power outages longer than one (1) hour.

The Contractor shall :

Install, remove, and operate electrical power generating and control systems, automatic or manual transfer switches and associated equipment with proper technical skills.

Check equipment for serviceability; position equipment such as gasoline and diesel engines, generators, switchgear, air compressors, and other power generating auxiliary equipment.

Check installed equipment to ensure compliance with publications, policies, and directives.

Inspect, test, and service component systems such as safety, fuel, lubrication, cooling, and air pressure, pumps, regulators, governors, and accessory equipment.

Observe and interpret instruments such as ammeters, voltmeters, frequency meters, synchro scopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges.

Adjust engine generator systems to maintain proper voltage, current, frequency, and synchronization; synchronize multiple generators when needed.

Perform all other position related duties as assigned or requested.

Minimum Position Knowledge, Skills, and Abilities Required :

High school diploma or equivalent training / experience and a valid driver's license

Minimum of five (5) years' experience in the electrical power generation field

Ability to manage resources and activities devoted to installation, operation, maintenance, and repair of electrical power generating and control systems

Must have knowledge of : Principles of electronics and electricity, including generation, conversion, transformation, distribution, and utilization; types, capacity, and purpose of low voltage circuits, circuit breakers, switches (automatic / manual type), fuses, regulators, relays, instruments, and meters associated with electric generation and distribution; interpreting instrument and meter readings; wiring diagrams, schematics, drawings and technical publications; techniques of operating and maintaining internal combustion engines, generators, generating plants, distribution panels, and accessory equipment; use and purpose of test equipment; safety rules and practices; grounding practices, environmental policies; principles of management; and operation and repair of electrical power production systems

Must be power production journeyman or master technicians

Experience with operating and maintaining generators ranging from 5 to 4,300 kilowatts desired

Must be able to obtain and maintain facility credentials / authorization. Note : US Citizenship is required for facility credentials / authorization at this work location.

Work Environment, Physical Demands, and Mental Demands :

While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or fee; and talk or hear. The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit, climb or balance, and taste or smell. The employee must frequently lift and / or move up to 10 pounds and occasionally lift and / or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, and ability to adjust focus. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and extreme heat. The employee is regularly exposed to wet and / or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold; and risk of electrical shock. The noise level in the work environment is usually loud, or may include unsafe conditions, questioning nonstandard operations or environmental factors that may involve unmitigated hazards, and providing feedback to supervisors and managers on all safety issues.

Other Responsibilities :

Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid / buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.

Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his / her Quality Management and Customer Satisfaction responsibilities.

Procedure Compliance - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his / her job.

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran's status, ancestry, sexual orientation, gender identity, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal EEO laws and supplemental language at and .

#J-18808-Ljbffr

Requirements

• Operational/ technical knowledge in any machines in food packaging industry
• Minimum 2 Year experience in Food packaging Industry
• Able to work in flexible shift.

Job Responsibilities

• To operate the converting machines of Cling Film, Aluminium Foil and Baking Paper effectively and safely.
• Completing job orders within the deadlines.
• Ensuring that machines are working properly and safely.
• Basic troubleshooting and identifying problems in a timely manner.
• Monitoring machine operations and either repairing or reporting malfunctions in a timely manner.
• Cleaning machines and work area at the end of every shift.

Benefits

• Visa
• Salary (Depends on Experience)
• Accommodation
• Overtime (OT)
• Other benefits as per UAE labour law

#J-18808-Ljbffr

Machine Operator - Ajman, UAE

As a Machine Operator, you will be responsible for operating and maintaining various types of machinery in an industrial setting. Your main duties will include setting up machines, monitoring their performance, and troubleshooting any issues that may arise. You will also be responsible for performing routine maintenance and cleaning on the machines to ensure their optimal functioning.

To be successful in this role, you should have a strong understanding of machine operations and be able to read and interpret technical manuals. You should also have excellent attention to detail and a strong mechanical aptitude. Physical stamina and the ability to work in a fast-paced environment are also important for this role.

Responsibilities:
- Set up machines according to specifications
- Monitor machine performance to ensure proper functioning
- Troubleshoot issues that may arise during operation
- Perform routine maintenance on machines
- Keep work area clean and organized
- Follow safety procedures at all times

Requirements:
- High school diploma or equivalent
- Proven experience as a Machine Operator or similar role
- Strong understanding of machine operations
- Ability to read and interpret technical manuals
- Excellent attention to detail and mechanical aptitude
- Physical stamina and ability to work in a fast-paced environment

Preferred Qualifications:
- Technical degree or certification in related field
- Experience with specific types of machinery (e.g. CNC machines)

We are an equal opportunity employer and welcome applications from all qualified individuals regardless of race, ethnicity, gender, age, religion, disability status, or nationality. This position is open to both Malayalees and foreigners who meet the requirements.

This is a full-time position with a salary of 1600$ per month. Part-time arrangements can also be considered for exceptional candidates. Please note that this position does not include accommodation.

If you are looking for an exciting opportunity as a Machine Operator in Ajman, UAE then apply now Join our team and be a part of a dynamic and growing organization. We offer competitive compensation, opportunities for career development, and a supportive work environment.

This job has no reviews yet. You can be the first

The most in-demand professions in Ajman:

MEAT SLAUGHTERHOUSE WORKER | PACKERS, SORTERS | UKRAINE | without work experience

Users also frequently search in these cities:

More professions from the category Agriculture - Agribusiness - Forestry:

Subscribe to our telegram channel @layboard_in

#J-18808-Ljbffr

Machine Operator

We are in need of a skilled Machine Operator to join our team in El-Ain. As a Machine Operator, you will be responsible for setting up, operating, and maintaining various types of machinery used in the production process. Your main goal will be to ensure the efficient and safe operation of our machines to meet production targets.

Key Responsibilities:

1. Set up and operate machinery according to production specifications
2. Monitor machine operations and make adjustments as needed
3. Troubleshoot any issues that may arise during production
4. Perform routine maintenance on machines to ensure proper functioning
5. Inspect finished products for quality assurance
6. Keep records of production output and machine maintenance activities

Requirements:

• Proven experience as a Machine Operator or similar role
• Familiarity with various types of machinery and their operation
• Ability to read and interpret technical manuals and blueprints
• Good understanding of safety procedures and guidelines for operating machinery
• Physically fit and able to stand for long periods of time
• Attention to detail and strong problem-solving skills

Preferred Qualifications:

• High school diploma or equivalent
• Technical degree or certification in machine operation or related field
• Experience with CNC machines is a plus

Salary: 1200$

Location: El-Ain, Pakistan/Canada (preference given to local candidates)

Employment Type: Part-time (with potential for full-time)

Accommodation: Not provided

Visa/Travel Expenses: Free visa and ticket provided by the company.

#J-18808-Ljbffr

The Role
Job Title: Machine Operator Job Description: We are seeking a skilled and reliable Machine Operator to join our production team. The Machine Operator will be responsible for operating and maintaining machinery to ensure efficient production and high-quality output. This role requires attention to detail, mechanical aptitude, and a commitment to safety and productivity. Key Responsibilities: Set up machines according to specifications Operate machinery to manufacture products according to quality standards Monitor machine operations and detect malfunctions or irregularities Perform routine maintenance and cleaning of machines Inspect finished products for defects and ensure conformance to specifications Follow safety protocols and maintain a clean and organized work environment Record production data and report issues to supervisors Requirements: High school diploma or equivalent Previous experience as a machine operator or in a manufacturing environment preferred Ability to read and interpret technical documents and manuals Strong attention to detail and problem-solving skills Physical stamina to stand for long periods and lift heavy materials if needed Willingness to work shifts and overtime as required Work Conditions: Fast-paced manufacturing or production environment Use of personal protective equipment (PPE) may be required Standing, bending, and lifting for extended periods

Requirements
Key Skills: Machine setup and operation Equipment maintenance and troubleshooting Quality control and inspection Adherence to safety protocols Basic mechanical and technical knowledge Ability to read blueprints and technical manuals Good physical stamina and hand-eye coordination Ideal Background: Minimum high school diploma or equivalent 2 years of experience in a manufacturing or industrial setting Willingness to work shifts, overtime, and in physically demanding conditions

About the company
Vega offers expert consultancy in migration, healthcare recruitment, education, logistics, and business solutions, driving global success.

The Role
We are looking for a skilled and detail-oriented Machine Operator to join our production team in Dubai. The ideal candidate will be responsible for operating, maintaining, and troubleshooting machinery to ensure efficient production processes while adhering to safety and quality standards.

Requirements
• Set up and operate machinery according to specifications and safety guidelines • Monitor machine operations and adjust settings as necessary to maintain quality and productivity • Conduct regular inspections and preventive maintenance on machines • Identify and troubleshoot basic mechanical issues to minimize downtime • Maintain a clean and organized work area in accordance with company policies • Record production data, including quantity, quality, and machine performance • Collaborate with team members and supervisors to optimize workflow • Ensure compliance with health, safety, and environmental regulations

About the company
Vega offers expert consultancy in migration, healthcare recruitment, education, logistics, and business solutions, driving global success.