209 Quality Control Inspector jobs in the United Arab Emirates

Diploma(Civil, Mechanical), Bachelor of Technology/Engineering(Civil, Mechanical)

Nationality

Any Nationality

Any

Vacancy

Job Description

1. To check, inspect and test incoming raw materials/ instruments to ensure that they meet project contract specification/ contract requirements

2. To perform the in-process inspection as per QC procedures and Inspection and Test plan (ITP)

3. To coordinate with Client/ Consultant for the verification of process inspection for varies QC activities and signing off all QC documents

4. To follow and ensure the proper filling system (in accordance to the Organization procedure) with full traceability for retrieving the document

Desired Candidate Profile

· A Bachelors Degree related to Engineering or Construction.

· QC experience mainly in reputed Organizations, having business in EPC Projects (and/or) Construction (and/or) Piping/ Special Structural spool Fabrication Shop (and/or) Pressure vessel manufacturing shop for having ASME Certification Marking for Petrochemical, Refinery, Oil & Gas, Desalination, Power Plant type EPC projects.

Civil

1. To undertake inspection of batching plant

2. To perform pre concrete inspections and ensure that the formwork, rebar’s and the concrete placing are in accordance with the approved drawings and international standards.

3. To undertake inspection of Concerting, Fireproofing and Asphalt paving

4. To undertake inspection of Building works

5. To undertake inspection of field compaction test on soil, cube tests & slump tests on concrete and the various third party tests on soil and concrete.

6. To read Civil related Engineering drawing

Mechanical

1. To undertake verification of all QC related activities in Plumbing, HVAC, Equipment (Static & rotating), Fire fighting system , Painting & Insulation

2. To apply practical knowledge on the interpretation of respective International Codes & standards (Ex., ASME B31 Codes, ASME Sec IX etc.,) applicable for various jobs

3. To coordinate Non Destructive Testing (NDT) activities and review of NDT reports.

4. To read and interpret the applicable drawings and documents used in the projects while executing the work and to ensure the compliance

Disclaimer: Naukrigulf.com is only a platform to bring jobseekers & employers together. Applicants are advised to research the bonafides of the prospective employer independently. We do NOT endorse any requests for money payments and strictly advice against sharing personal or bank related information. We also recommend you visit Security Advice for more information. If you suspect any fraud or malpractice, email us at

Emarat Aloula Contracting is a multidiscipline general contractor that also provides extensive facilities management services, working with a wide range of sectors from petrochemical to water. The services delivered by the business include infrastructure projects development, fabrication services, EPC, scaffolding services, engineering, and construction. The expansive Emarat Aloula facilities cover an area of 280,000m2, with six covered fabrication bays, a painting area, and ample storage space for both raw materials and finished products. EAC employs 2500 people from multiple countries and has built strong relationships with some of the leading EPC firms in the region. Emarat Aloula Contracting Co. has worked with a number of private and government institutions such as ADWEA Waste-Water Plant, Sheikh Khalifa Medical City and Dubai Festival City Mall. ASC created the PRIDE Core Foundation, based on Planning, Reliability, Innovation, Determination, and Experience. We live by these values in every project we undertake to ensure high levels of quality are always implemented.

Quality Control Inspector - UAE National page is loaded Quality Control Inspector - UAE National Apply locations AE-ABU DHABI-AL GHAITH YARD, MUSSAFAH INDUSTRIAL 16th STREET time type Full time posted on Posted Yesterday job requisition id R147531

Quality Control Inspector - UAE National

Join our Quality Control Team

Our innovative physical and digital solutions improve efficiency for manufacturing new equipment for oilfield services. Our team ensures high quality, consistency and reliability for all products throughout the complete life cycle of our manufacturing process.

Partner with the best

As a Quality control Inspector, you will provide support on quality inspection on machine parts. You will ensure all parts and tools are inspected thoroughly to meets company’s expectation.

As Quality control Inspector, you will be responsible for:

• Complying to HSE & Quality policy. Effectively participate in HSE and Quality programs and training as assigned.
• Understanding and interpreting technical drawings, specifications, and procedures.
• Identifying and using measuring equipment needed to verify requirements.
  Responsible for performing inspections such as visual, dimensional and Inspection of the parts requires in Assembly and test area.
• Verifying completeness of all operations and records.
• Completing and maintaining inspection records, inspection logs, calibration.
• Initiating non-conformance reports on all products, parts, assemblies and subassemblies that are not to requirements.
• Driving quality culture to their plant.
• Collaborating with site quality and manufacturing engineering on RCA, corrective actions and continuous improvement.
• Working with Baker Hughes management system databases and systems (SAP, BHOS, etc)
• May participate in quality audits, material review boards, kaizens or root cause analysis.
• May need to program or calibrate inspection equipment
  Financial
• Identifying cost-out opportunities and elevate to lead for review/implementation.

Fuel your passion

To be successful in this role you will:

• Have diploma in Mechanical or relevant technical education.
• Have a minimum of 0-3 years of experience in Quality inspection and documentation - fresh graduates are welcome to apply
• Be detail-oriented with good written and verbal communication skills.
• Demonstrate a thorough and logical approach to proactively solving complex problems.

Work in a way that works for you

We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too.

• This role is a shift based working pattern.

Working with us

Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.

Working for you

Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:

• Contemporary work-life balance policies and wellbeing activities
• Comprehensive private medical care options
• Safety net of life insurance and disability programs
• Tailored financial programs
• Additional elected or voluntary benefits

At Baker Hughes, we are transforming the future of energy. With operations in over 120 countries, we are developing and deploying industry-leading technologies and services to take energy forward. For more than a century, our inventions have revolutionized energy. Today, we are bringing our expertise to make oil and gas safer, cleaner, and more efficient. Our people are the trusted experts, relied on to solve customer challenges big and small. We invest in the health and well-being of our workforce, train and reward talent, and develop leaders at all levels to bring out the best in each other. We believe in creating an environment of diversity and inclusion, without bias. We know we are better when all of our people are developed, engaged, and able to bring their whole authentic selves to work. We're makers, inventors, and leaders who aren't afraid of the tough challenges. We believe pushing boundaries will help to lead the way for a new energy future. #J-18808-Ljbffr

Quality Control Inspector - UAE National

Join our Quality Control Team

Our innovative physical and digital solutions improve efficiency for manufacturing new equipment for oilfield services. Our team ensures high quality, consistency and reliability for all products throughout the complete life cycle of our manufacturing process.

Partner with the best

As a Quality control Inspector, you will provide support on quality inspection on machine parts. You will ensure all parts and tools are inspected thoroughly to meets company’s expectation.

As Quality control Inspector, you will be responsible for:

• Complying to HSE & Quality policy. Effectively participate in HSE and Quality programs and training as assigned.
• Understanding and interpreting technical drawings, specifications, and procedures.
• Identifying and using measuring equipment needed to verify requirements.
  Responsible for performing inspections such as visual, dimensional and Inspection of the parts requires in Assembly and test area.
• Verifying completeness of all operations and records.
• Completing and maintaining inspection records, inspection logs, calibration.
• Initiating non-conformance reports on all products, parts, assemblies and subassemblies that are not to requirements.
• Driving quality culture to their plant.
• Collaborating with site quality and manufacturing engineering on RCA, corrective actions and continuous improvement.
• Working with Baker Hughes management system databases and systems (SAP, BHOS, etc)
• May participate in quality audits, material review boards, kaizens or root cause analysis.
• May need to program or calibrate inspection equipment
  Financial
• Identifying cost-out opportunities and elevate to lead for review/implementation.

Fuel your passion

To be successful in this role you will:

• Have diploma in Mechanical or relevant technical education.
• Have a minimum of 0-3 years of experience in Quality inspection and documentation - fresh graduates are welcome to apply
• Be detail-oriented with good written and verbal communication skills.
• Demonstrate a thorough and logical approach to proactively solving complex problems.

Work in a way that works for you

We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too.

• This role is a shift based working pattern.

Working with us

Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.

Working for you

Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:

• Contemporary work-life balance policies and wellbeing activities
• Comprehensive private medical care options
• Safety net of life insurance and disability programs
• Tailored financial programs
• Additional elected or voluntary benefits

We are an energy technology company that provides solutions to energy and industrial customers worldwide. Built on a century of experience and conducting business in over 120 countries, our innovative technologies and services are taking energy forward – making it safer, cleaner and more efficient for people and the planet.

Are you seeking an opportunity to make a real difference in a company that values innovation and progress? Join us and become part of a team of people who will challenge and inspire you! Let’s come together and take energy forward. Baker Hughes Company is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. #J-18808-Ljbffr

Quality Control Inspector - UAE National page is loaded

Quality Control Inspector - UAE National

Join our Quality Control Team

Our innovative physical and digital solutions improve efficiency for manufacturing new equipment for oilfield services. Our team ensures high quality, consistency and reliability for all products throughout the complete life cycle of our manufacturing process.

Partner with the best

As a Quality control Inspector, you will provide support on quality inspection on machine parts. You will ensure all parts and tools are inspected thoroughly to meets company’s expectation.

As Quality control Inspector, you will be responsible for:

• Complying to HSE & Quality policy. Effectively participate in HSE and Quality programs and training as assigned.
• Understanding and interpreting technical drawings, specifications, and procedures.
• Identifying and using measuring equipment needed to verify requirements.
  Responsible for performing inspections such as visual, dimensional and Inspection of the parts requires in Assembly and test area.
• Verifying completeness of all operations and records.
• Completing and maintaining inspection records, inspection logs, calibration.
• Initiating non-conformance reports on all products, parts, assemblies and subassemblies that are not to requirements.
• Driving quality culture to their plant.
• Collaborating with site quality and manufacturing engineering on RCA, corrective actions and continuous improvement.
• Working with Baker Hughes management system databases and systems (SAP, BHOS, etc)
• May participate in quality audits, material review boards, kaizens or root cause analysis.
• May need to program or calibrate inspection equipment
  Financial
• Identifying cost-out opportunities and elevate to lead for review/implementation.

Fuel your passion

To be successful in this role you will:

• Have diploma in Mechanical or relevant technical education.
• Have a minimum of 0-3 years of experience in Quality inspection and documentation - fresh graduates are welcome to apply
• Be detail-oriented with good written and verbal communication skills.
• Demonstrate a thorough and logical approach to proactively solving complex problems.

Work in a way that works for you

We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too.

• This role is a shift based working pattern.

Working with us

Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.

Working for you

Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:

• Contemporary work-life balance policies and wellbeing activities
• Comprehensive private medical care options
• Safety net of life insurance and disability programs
• Tailored financial programs
• Additional elected or voluntary benefits

At Baker Hughes, we are transforming the future of energy. With operations in over 120 countries, we are developing and deploying industry-leading technologies and services to take energy forward.
For more than a century, our inventions have revolutionized energy. Today, we are bringing our expertise to make oil and gas safer, cleaner, and more efficient.
Our people are the trusted experts, relied on to solve customer challenges big and small. We invest in the health and well-being of our workforce, train and reward talent, and develop leaders at all levels to bring out the best in each other.
We believe in creating an environment of diversity and inclusion, without bias. We know we are better when all of our people are developed, engaged, and able to bring their whole authentic selves to work.
We're makers, inventors, and leaders who aren't afraid of the tough challenges. We believe pushing boundaries will help to lead the way for a new energy future.

Quality Control Inspector - UAE National

Join our Quality Control Team

Our innovative physical and digital solutions improve efficiency for manufacturing new equipment for oilfield services. Our team ensures high quality, consistency and reliability for all products throughout the complete life cycle of our manufacturing process.

Partner with the best

As a Quality control Inspector, you will provide support on quality inspection on machine parts. You will ensure all parts and tools are inspected thoroughly to meets company’s expectation.

As Quality control Inspector, you will be responsible for:

• Complying to HSE & Quality policy. Effectively participate in HSE and Quality programs and training as assigned.
• Understanding and interpreting technical drawings, specifications, and procedures.
• Identifying and using measuring equipment needed to verify requirements.
  Responsible for performing inspections such as visual, dimensional and Inspection of the parts requires in Assembly and test area.
• Verifying completeness of all operations and records.
• Completing and maintaining inspection records, inspection logs, calibration.
• Initiating non-conformance reports on all products, parts, assemblies and subassemblies that are not to requirements.
• Driving quality culture to their plant.
• Collaborating with site quality and manufacturing engineering on RCA, corrective actions and continuous improvement.
• Working with Baker Hughes management system databases and systems (SAP, BHOS, etc)
• May participate in quality audits, material review boards, kaizens or root cause analysis.
• May need to program or calibrate inspection equipment
  Financial
• Identifying cost-out opportunities and elevate to lead for review/implementation.

Fuel your passion

To be successful in this role you will:

• Have diploma in Mechanical or relevant technical education.
• Have a minimum of 0-3 years of experience in Quality inspection and documentation - fresh graduates are welcome to apply
• Be detail-oriented with good written and verbal communication skills.
• Demonstrate a thorough and logical approach to proactively solving complex problems.

Work in a way that works for you

We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too.

• This role is a shift based working pattern.

Working with us

Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.

Working for you

Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:

• Contemporary work-life balance policies and wellbeing activities
• Comprehensive private medical care options
• Safety net of life insurance and disability programs
• Tailored financial programs
• Additional elected or voluntary benefits

Inspection, verification, monitoring and control of projects Quality Control activities regarding NDT. Ensure compliance of NDT with project specifications, tender, work instructions, procedures and manuals as appropriate.

Minimum Requirements:

• University Degree or Diploma in relevant field or industrial experience.
• Three years inspection experience in a shipyard, oil & gas industry, Offshore or related field.
• Qualified ASNT /PCN Level III NDT (RT/IVIT/UT/PT/VT)/Visual inspector or similar.

About The Company:

Allen & York is a market leading specialist Recruitment Company serving the Environment, Planning & Built Environment, Energy and Health & Safety sectors. We enjoy a distinguished reputation for quality and professionalism.

Internal: System Quality Manager, Subsystem Manager, Depot Manager.
External: Clients or their representatives, external suppliers.

• Perform quality control activities for the rolling stock retrofit scope.
• Conduct fleet-wide inspections as per defined containment actions and monitoring scope.
• Maintain all quality control records for retrofit activities and fleet-wide containment actions.
• Ensure documentation updates for all retrofit and fleet-wide inspections.
• Manage the traceability matrix showing planned vs. completed retrofit works.
• Ensure calibration of all working tools and maintain the register.
• Familiar with special processes like torque tightening.
• Ensure the validity of tools, materials, and chemicals used daily by the RSK team.
• Report any nonconformities observed during daily activities to the Quality Manager and Subsystem Manager, and follow up for closure.
• Initiate repair loops by reporting NCRs for hardware failures via the online Alstom supplier portal and follow up for inputs from suppliers.
• Attend internal meetings with the Quality Manager and Subsystem Manager to provide updates on daily activities.

• Perform internal inspections to ensure punch/snag items are closed before inviting the customer.
• Conduct inspections with the customer for final acceptance of punch/snag items on-site.
• Update the rolling stock punchlist daily.
• Prepare daily/weekly progress reports for punch/snag list closure, internally and with the customer.

Educational requirements:

University degree in Technical, Electrical, Electronic, or Mechanical engineering.

Technical Knowledge / Experience:

• 13 years of experience in quality within the railway industry; rolling stock experience is mandatory.
• Knowledge of quality standards (ISO9001) and quality tools.
• Proficiency in MS Office (Excel and Word).
• Fluent in English.
• Roles: RSY Quality Manager, Rolling Stock Quality Control Inspector.

• Collaboration and teamwork
• Analytical thinking
• Attention to detail
• Rigorousness

Based in various depots.

Applicants interested in a 6-month contract with possible extension only, please apply.

Note: Only shortlisted candidates will be contacted.

No

Contract

You need to Login or Register to be able to apply for jobs on our site.

We are an Emirati company focused on creating a balanced, expert workforce, specialising in aviation services, for the UAE. Come join us today!

Position: Technical Inspector - Quality Control & Engineering

Published on: 07/07/2025

The Technical Inspector is a technical expert responsible for the assigned aircraft/workshop, ensuring the clearance of all critical (Grounding-X, Circled-X) unscheduled and scheduled maintenance and repair actions on the aircraft and components. The role involves ensuring maintenance and repair are performed according to standards, and accurate records are maintained daily.

Key responsibilities include:

1. Review and audit technical records supporting aircraft airworthiness in accordance with DA Pamphlet 738-751, TM 1-1500-328-23, and other applicable publications.
2. Inspect aircraft and components during removal, disassembly, assembly, installation, and adjustment phases, ensuring workmanship and materials meet manufacturer specifications and maintenance manuals.
3. Ensure proper documentation of work-in-progress and corrective actions in line with TAMMS-(A) and SOPs.
4. Maintain accurate aircraft historical records, ensuring compliance with component SSL, overhaul, or retirement schedules.
5. Execute OEM Bulletins, Maintenance, and Safety messages timely and accurately.
6. Submit Product Quality Deficiency Reports as needed and assist in aircraft incident and accident investigations.
7. Oversee aircraft modifications for quality compliance.
8. Test airframe connections for tightness and inspect parts fit using appropriate tools.
9. Verify installation accuracy of aircraft components using precision measurement tools.
10. Perform duties of Quality Control Supervisor when required and other duties as assigned.
11. Conduct scheduled facility audits for safety and policy adherence.
12. Perform QC duties off-site if needed.
13. Report irregularities that could cause injury or compromise aircraft safety, and advise the QC Supervisor.
14. Comply with all SOPs.
15. Review aircraft records for discrepancy trends and problem areas.
16. Prepare technical reports, correspondence, and status updates per customer requirements.
17. Monitor aircraft equipment and maintenance processes to identify failure root causes and recommend procedural improvements.

You need to Login or Register to be able to apply for jobs on our site.

We are an Emirati company focused on creating a balanced, expert workforce, specialising in aviation services, for the UAE. Come join us today!

Technical Inspector - Quality Control & Engineering

True
Published on 27/05/2025

Overview

The Technical Inspector (TI) is expected to be the technical expert on assigned aircraft and is responsible for ensuring the daily unscheduled and scheduled maintenance actions are conducted IAW authorized maintenance procedures and applicable regulations and properly documented in aircraft logbooks and historical records IAW TAMMS-A and any other relevant local procedures. Will also be responsible for : 1. Inspects Aircraft, Aircraft Parts/Components and Materials in accordance with proper procedures, methods, practices operations and safety. 2. Review and audit all technical records that supporting airworthiness of Aircraft in accordance with DA Pamphlet 738-751 and TM 1-1500-328-23. 3. Research technical data and performs inspections on assigned Aircraft, Aircraft Components and back shop repair/overhaul, both AVUM/ AVIM maintenance level. Completes inspections in accordance with applicable aircraft/component maintenance manuals. 4. Performs inspection of aircraft components during their assembly, installation and adjustment phases of incorporation onto an aircraft. Ensures the workmanship and materials conform to the aircraft manufacturers specifications and required maintenance manual procedures. 5. Ensures that all Work-In-Progress is properly documented and that corrective actions used will be recorded in accordance with TAMMS-A requirements. 6. Responsible for all the proper aircraft historical record updates, resulting in no over flights of the component TBO, overhaul or retirement schedule. 7. Responsible for the timely and accurate execution of all SB's, ASAM's and Safety of Flight massages. 8. Responsible for the submission of the Quality Deficiency Reports when required and for the Quality Control assistance during all the aircraft incidents and accidents. 9. Responsible for the proper Quality Control oversight of all aircraft modifications for assigned aircraft. 10. Performs duties of Quality Control Section Supervisor (QCSS) in his absence. 11. Performs a 30 days facility audits for safety and policy compliance. 12. Performs QC maintenance duties away from base on temporary duty. 13. Reports any irregularities in daily standard practices used that would cause injury to personnel or deems the aircraft unsafe or non airworthy and advises Supervisor/Manager. #J-18808-Ljbffr