222 Reservoir Engineer jobs in the United Arab Emirates

About The Company
We are the largest oil producer within the ADNOC Group, accounting for over half of ADNOC's total oil production. As the country's oldest oil production company, our operations date back to 1939, when a 75-year concession was signed to explore for oil and gas in Abu Dhabi. As a global industry leader in environmental sustainability, we are the first in the world to capture carbon from the iron and steel industry. Our Carbon Capture, Utilization, and Storage (CCUS) facility at Al Reyadah has the capacity to capture 800,000 tonnes of carbon dioxide (CO2) from Emirates Steel Industries (ESI) each year, for use in the Bab and Rumaitha oil fields to support Enhanced Oil Recovery (EOR). Al Reyadah is, therefore, a critical enabler of ADNOC's 2030 sustainability goals.

JOB PURPOSE:
Update / Generate black oil and compositional simulation models with field development planning, short, and

long-term profiles. Conduct model sensitivities and prioritize development schemes applying best practices,

Uncertainty & Risk assessment and economics. Undertakes reservoir simulation studies to attain stated

objectives and translate results into operational guidelines.

**KEY ACCOUNTABILITIES:

Job Specific Accountabilities**

• Coordinates and works with Geoscientists on reservoir characterization and upscaling.
• Builds sizable Full Field simulation models, history match and use them in predictions.
• Conducts quality check and consistency of simulation model, history match scenarios with respect to
• geological model characteristics.
• Develops characterization of reservoir fluids and Equation of State (EOS) modelling, calibration and
• Convert simple black oil models to compositional. Diagnoses model convergence and run-time problems.
• Coordinates with Technical centre in designing IOR/EOR methods (WI, Immiscible GI, Miscible GI, and Surfactant and polymer injection) to enhance recovery and pressure maintenance methods.
• Applies different methods of reserves estimation using probabilistic and deterministic methods (Mbal, DCA and simulation models sensitivities).
• Identifies required action using simulation models for maximize recovery/meet current production quotas, design, follow up, QC and analyse reservoir studies e.g. RCA, SCAL and PVT.
• Conducts special simulation studies for Field Development optimization (well pacing, infill wells,
• advanced wells, Pilots)
• Applies multiphase flow in the reservoir, effective permeability concept and correlations for relative
• permeability. Integrate pressure and production test results for reservoir simulation and management decisions.
• Contributes to reservoir monitoring program and data gathering with effective cost program to enable collecting necessary data to help best reservoir management and reduce uncertainties.
• Liaises with contractors conducting the study, analyses and reviews findings and actions study recommendations. Participate in periodic update and validation of database with monthly production/injection data and descriptions to display wells, reservoir and field performance for appropriate distribution and Simulation model recalibration.

Generic Accountabilities
Supervision

• Plan, supervise and coordinate all activities in the assigned area to meet functional objectives.
• Train and develop the assigned staff on relevant skills to enable them to become proficient on the job and deliver the respective section objectives.

Budgets

• Provide input for preparation of the Department / Section budgets, assist in the implementation of the approved Budget, and work plans to deliver Section objectives.
• Investigate and highlight any significant variances to support effective performance and cost control.

Policies, Systems, Processes & Procedures

• Implement approved Department / Section policies, processes, systems, standards and procedures in order to support execution of the Department / Section's work programs in line with Company and
• International standards.
• Comply with all applicable legislation and legal regulations.

Performance Management

• Contribute to the achievement of the approved Performance Objectives for the Department / Section in line with the Company Performance framework.

Innovation and Continuous Improvement

• Design and implement new tools and techniques to improve the quality and efficiency of operational processes.
• Identify improvements in internal processes against best practices in pursuit of greater efficiency in line with ISO standards in order to define intelligent solutions for issues confronting the function.

Health, Safety, Environment (HSE) and Sustainability

• Comply with the ADNOC Onshore/ ADNOC HSE procedure requirements
• Report all incident and occupational illness to line supervisor.
• If aware of any unsafe practice or condition, or if in any doubt about the safety of any situation, immediately consult their Line supervisor.
• Carryout the emergency responsibilities in line with the respective roles as per the emergency organization
• Be familiar with the ADNOC HSE Recognition and Accountability Framework requirements. Comply with all applicable HSE requirements at all times. Exercise the STOP Work Authority bestowed if any unsafe act or situation puts you or your colleagues at risk

Reports

• Provide inputs to prepare Section MIS and progress reports for Company Management.

COMMUNICATIONS & WORKING RELATIONSHIPS:
Internal

• Regular contact with the relevant stakeholders when required.

External

• Nil

QUALIFICATIONS, EXPERIENCE, KNOWLEDGE & SKILLS:
Minimum Qualification

• Bachelor Degree Reservoir/Petroleum/Chemical Engineering or equivalent.

Minimum Experience & Knowledge & Skills

• 8 years of experience in reservoir engineering including oil and gas fields' development management and Full Field simulation studies (use software models).
• Reservoir and Production Operations Knowledge.
• Analytical Reservoir characterization (Material Balance) knowledge
• Numerical reservoir simulation (Eclipse, Intersect)
• Pressure Transient Analysis and Well Performance knowledge, PVT Modelling

About the Company

We are the largest oil producer within the ADNOC Group, accounting for over half of ADNOC's total oil production. As the country's oldest oil production company, our operations date back to 1939, when a 75-year concession was signed to explore for oil and gas in Abu Dhabi. As a global industry leader in environmental sustainability, we are the first in the world to capture carbon from the iron and steel industry. Our Carbon Capture, Utilization, and Storage (CCUS) facility at Al Reyadah has the capacity to capture 800,000 tonnes of carbon dioxide (CO2) from Emirates Steel Industries (ESI) each year, for use in the Bab and Rumaitha oil fields to support Enhanced Oil Recovery (EOR). Al Reyadah is, therefore, a critical enabler of ADNOC's 2030 sustainability goals.

About the Job

Provides expert reservoirs engineering input to multidisciplinary projects including field development planning, reservoir performance analyses, and reservoir estimation of production/injection capacities. Leads reservoir management studies, performance review, and optimization using appropriate techniques.

Key Accountabilities

• Coordinates and works with Geoscientists on reservoir characterization and upscaling.
• Builds sizable Full Field simulation models, history matches, and uses them in predictions.
• Conducts quality checks and consistency of simulation models, history match scenarios with respect to geological model characteristics.
• Develops characterization of reservoir fluids and Equation of State (EOS) modelling, calibration.
• Converts simple black oil models to compositional. Diagnoses model convergence and run-time problems.
• Coordinates with Technical Centre in designing IOR/EOR methods (WI, Immiscible GI, Miscible GI, and Surfactant and polymer injection) to enhance recovery and pressure maintenance methods.
• Applies different methods of reserves estimation using probabilistic and deterministic methods (Mbal, DCA, and simulation models sensitivities).
• Identifies required action using simulation models to maximize recovery/meet current production quotas, designs, follows up, QC, and analyses reservoir studies e.g. RCA, SCAL, and PVT.
• Conducts special simulation studies for Field Development optimization (well pacing, infill wells, advanced wells, Pilots).
• Applies multiphase flow in the reservoir, effective permeability concept, and correlations for relative permeability. Integrates pressure and production test results for reservoir simulation and management decisions.
• Contributes to reservoir monitoring program and data gathering with effective cost program to enable collecting necessary data to help best reservoir management and reduce uncertainties.
• Liaises with contractors conducting the study, analyses, and reviews findings and actions study recommendations. Participates in periodic update and validation of database with monthly production/injection data and descriptions to display wells, reservoir, and field performance for appropriate distribution and Simulation model recalibration.

Qualifications, Experience, Knowledge & Skills:

• Minimum Qualification: Bachelor Degree in Reservoir/Petroleum/Chemical Engineering or equivalent.
• Minimum Experience & Knowledge & Skills: 8 years of experience in reservoir engineering including oil and gas fields' development management and Full Field simulation studies (use of software models).
• Reservoir and Production Operations Knowledge.
• Analytical Reservoir characterization (Material Balance) knowledge.
• Numerical reservoir simulation (Eclipse, Intersect).
• Pressure Transient Analysis and Well Performance knowledge, PVT Modelling.

Reservoir engineers play a vital role in the oil and gas industry, responsible for understanding reservoir behaviors to optimize recovery.

• Develop and execute reservoir engineering studies and analysis to define reservoir parameters.
• Conduct well and field test data analysis to understand permeability, pressure, and formation damage.
• Prepare updated development plans to enhance recovery and suggest remedial actions.
• Collaborate with Geology, Production, and Drilling engineers to design drilling and completion programs.

• Provide Reservoir Engineering inputs for Delineation, Development, Appraisal & Workover Well Prognosis.
• Develop reservoir monitoring charts and track well performance daily.
• Generate quick economic models to predict future outcomes.
• Follow all relevant operational procedures and guidelines.

Job Purpose

• Plan, coordinate and oversee programs for acquisition and analysis of reservoir data.
• Formulate reservoir strategies designed to maximize ultimate economic hydrocarbon recovery.
• Provide reservoir engineering support to optimize the implementation of field development plans.
• Support New Ventures and Exploration departments in evaluating new development opportunities and assessing their risk.

Job Responsibilities

• Conduct preliminary assessments of archived and new reservoir, development and production data.
• Coordinate and manage subsurface data acquisition and quality control programs in areas such as fluid sampling, pressure monitoring, PVT analysis and special core analysis.
• Define reservoir engineering requirements for transient tests, and work with engineering and operations staff to design testing programs.
• Interpret field data, laboratory results and reservoir studies to reliably assess reservoir performance.
• Estimate oil and gas reserves and review performance trends using material balance calculations, simulation study results, production decline curve analysis, pressure data and other available methods. Assess ultimate economic recovery potential from initial or current production to abandonment.
• Develop reliable short-term and medium-term production forecasts based on estimates of oil and gas in place, understanding of reservoir drive mechanisms, information from static reservoir models, results of numerical simulations and analysis of current reservoir performance.
• Identify, quantify and present opportunities for appraisal, development, production optimization and utilization of new technologies and tools.
• Perform economics and risk assessment studies of planned reservoir development projects and conduct initial technical and economic evaluations.

Education

• Bachelor's degree or higher in Petroleum Engineering or closely related discipline.
• Minimum 10 years of experience with an international exploration and production (E&P) operator in reservoir management, and a broad background in field development planning (particularly in offshore static and multi-layered reservoirs. High level of skill in reservoir engineering software applications.

Job Requirement
Contract Tendering Procedure

Asset Development Process

Data Acquisition

Core Data Interpretation

Drilling and Well Planning

Drilling, Completion and Workover

Interpretation of Cased Hole and Production Well Logs

Enhanced Oil Recovery (EOR) Methods

Facilities Engineering

Open Hole Well Log Interpretation

Field Development Planning

Fluid Flow in Porous Media

Vertically Distributed Pressure Profiles and Pore Pressure

Gas Lift

Oil and Gas Reserves Estimation

Sedimentary Petrology and Sedimentology

Oil Field Reservoir Management

Petroleum Geology

Subsurface Mapping, Volumetric Calculations

Petrophysics

Pore Pressure Prediction

Pressure Transient Testing and Analysis

Sandstone Reservoirs

Production Engineering

Pump-assisted Artificial Lift

Report writing

Geomodeling

Reservoir Engineering

Reservoir/Asset Management

Subsurface Uncertainty

Oilfield Chemicals

Waterflooding

Well Surveillance

Reservoir Simulation

Geophysics

Certifications
Skills
Physical Requirements

About the Role

We are seeking a highly skilled Reservoir Engineer to join our team in developing oil and gas fields. As a key member of our multidisciplinary project team, you will provide expert reservoir engineering input on field development planning, reservoir performance analysis, and reservoir estimation of production/injection capacities.

Key Responsibilities

• You will work closely with geoscientists to characterize and upscale reservoirs.
• You will build and run full-field simulation models, history match scenarios, and use them to make predictions.
• You will conduct quality checks and ensure consistency of simulation models with geological model characteristics.
• You will develop characterization of reservoir fluids and equation of state modeling, calibration.
• You will convert black oil models to compositional models and diagnose convergence and runtime problems.
• You will design and implement IOR/EOR methods (WI, Immiscible GI, Miscible GI, and Surfactant and polymer injection) to enhance recovery and pressure maintenance.
• You will apply different methods of reserves estimation using probabilistic and deterministic approaches.
• You will identify required actions to maximize recovery and meet current production quotas.
• You will contribute to reservoir monitoring programs and data gathering initiatives.
• You will work with contractors to analyze and review study findings and recommendations.

Requirements

• Bachelor's degree in Reservoir Engineering or related field.
• At least 8 years of experience in reservoir engineering, including oil and gas field development management and full-field simulation studies.
• Strong knowledge of reservoir and production operations, analytical reservoir characterization, numerical simulation, and pressure transient analysis.

Benefits

This is a challenging and rewarding role that offers opportunities for professional growth and development. You will be working with a talented team of professionals who are passionate about their work. We offer a competitive salary and benefits package, as well as opportunities for career advancement.

• Carry out detailed analysis on data obtained from well and field tests in order to define well and reservoir parameters, such as reservoir permeability, reservoir pressure, formation damage, well productivity and injectivity index.

• Participate in the preparation of reservoir tests, production logging and sampling requirements. Devise well testing design, including gauge specifications, flowing/injection period and shut-in time.

• Participates in preparation of updated development plans for the assigned field to optimize recovery and suggests remedial actions such as workovers, stimulation to improve recovery.

• Coordinates with Geology, Production and Drilling engineers and participates in drawing up drilling and completion programs for all wells and recommends to supervisor necessary workovers, coring, logging, production/injection tests,

• Provide Reservoir Engineering inputs for Delineation, Development, Appraisal & Workover Well Prognosis.

• Draws up reservoir monitoring Bar Chart and monitors well performance on daily basis through feedback information from operating divisions, compares the actual achievement against planned targets, discusses operational problems and recommends remedial actions and detects deviations.

• To be able to generate a quick economic model to predict economical outlook for any CFDP or FDP.
• Follow all relevant operational procedures and instructions

• Participate in studies designed to improve well testing interpretation methods to be available in the Company .

• Participate in studies aimed at deriving oil production and water/gas injection rates necessary for oil production to conform to specified constraints such as limitations of gas/oil ratio, water/oil ratio and reservoir pressures by evaluating updated production/injection performance plots.

• Carry out certain studies based on the derived test results and the application of other reservoir engineering techniques (e.g. isobaric maps, isopermeability maps).
• Carry out some simulation model studies particularly using models transferred to the reservoir management section to utilize these as an effective monitoring tool.
• Conducts studies, as assigned, to predict future reservoir performance. Includes evaluating alternative allocations of production/injection wells, optimum rates of recovery per well and the entire field plans.

• Compare the interpreted test data with previous test results to recommend remedial measures if required and ensures the updating and maintenance of well testing data files, perforation in the Company.

• Carry out similar or related duties such as collecting all data related to well testing, production/injection and participating in defining requirements for operations such as PVT Coring, SCAL, etc.

• Participates in the preparation of PDD's Monthly reports such as Production Allocation, Injection Allocation, Well Status, and Petroleum Engineering Reports.

• Reports directly to Line manager, VP-Field Development and team member within Development and Division on the ongoing operation and project.

• Daily interactions with Reservoir Engineering Specialist, line manager and other team members in the department and division regarding project execution.

• Frequent contacts with OPCO staff, on joint studies or sub surface projects carried out by the OPCOs.

• Occasional contacts with consultants and contractors on projects carried out for Al Dhafra.

• Carry out detailed analysis on data obtained from well and field tests in order to define well and reservoir parameters, such as reservoir permeability, reservoir pressure, formation damage, well productivity and injectivity index.

• Participate in the preparation of reservoir tests, production logging and sampling requirements. Devise well testing design, including gauge specifications, flowing/injection period and shut-in time.

• Participates in preparation of updated development plans for the assigned field to optimize recovery and suggests remedial actions such as workovers, stimulation to improve recovery.

• Coordinates with Geology, Production and Drilling engineers and participates in drawing up drilling and completion programs for all wells and recommends to supervisor necessary workovers, coring, logging, production/injection tests,

• Provide Reservoir Engineering inputs for Delineation, Development, Appraisal & Workover Well Prognosis.

• Draws up reservoir monitoring Bar Chart and monitors well performance on daily basis through feedback information from operating divisions, compares the actual achievement against planned targets, discusses operational problems and recommends remedial actions and detects deviations.

• To be able to generate a quick economic model to predict economical outlook for any CFDP or FDP.
• Follow all relevant operational procedures and instructions

• Participate in studies designed to improve well testing interpretation methods to be available in the Company .

• Participate in studies aimed at deriving oil production and water/gas injection rates necessary for oil production to conform to specified constraints such as limitations of gas/oil ratio, water/oil ratio and reservoir pressures by evaluating updated production/injection performance plots.

• Carry out certain studies based on the derived test results and the application of other reservoir engineering techniques (e.g. isobaric maps, isopermeability maps).
• Carry out some simulation model studies particularly using models transferred to the reservoir management section to utilize these as an effective monitoring tool.
• Conducts studies, as assigned, to predict future reservoir performance. Includes evaluating alternative allocations of production/injection wells, optimum rates of recovery per well and the entire field plans.

• Compare the interpreted test data with previous test results to recommend remedial measures if required and ensures the updating and maintenance of well testing data files, perforation in the Company.

• Carry out similar or related duties such as collecting all data related to well testing, production/injection and participating in defining requirements for operations such as PVT Coring, SCAL, etc.

• Participates in the preparation of PDD's Monthly reports such as Production Allocation, Injection Allocation, Well Status, and Petroleum Engineering Reports.

• Reports directly to Line manager, VP-Field Development and team member within Development and Division on the ongoing operation and project.

• Daily interactions with Reservoir Engineering Specialist, line manager and other team members in the department and division regarding project execution.

• Frequent contacts with OPCO staff, on joint studies or sub surface projects carried out by the OPCOs.

• Occasional contacts with consultants and contractors on projects carried out for Al Dhafra.

Job Purpose
Carry out a variety of reservoir engineering studies, analysis and synthesis on data obtained from well test and well production/injection history, in order to devise reservoir parameters to help in understanding reservoir behaviors and ensure optimum recovery.

Job Specific Accountabilities (Part 1)

• Carry out detailed analysis on data obtained from well and field tests in order to define well and reservoir parameters, such as reservoir permeability, reservoir pressure, formation damage, well productivity and injectivity index.
• Participate in the preparation of reservoir tests, production logging and sampling requirements. Devise well testing design, including gauge specifications, flowing/injection period and shut-in time.
• Participates in preparation of updated development plans for the assigned field to optimize recovery and suggests remedial actions such as workovers, stimulation to improve recovery.
• Coordinates with Geology, Production and Drilling engineers and participates in drawing up drilling and completion programs for all wells and recommends to supervisor necessary workovers, coring, logging, production/injection tests,

Job Specific Accountabilities (Part 2)

• Provide Reservoir Engineering inputs for Delineation, Development, Appraisal & Workover Well Prognosis.
• Draws up reservoir monitoring Bar Chart and monitors well performance on daily basis through feedback information from operating divisions, compares the actual achievement against planned targets, discusses operational problems and recommends remedial actions and detects deviations.
• To be able to generate a quick economic model to predict economical outlook for any CFDP or FDP.
• Follow all relevant operational procedures and instructions

Job Specific Accountabilities (Part 3)

• Participate in studies designed to improve well testing interpretation methods to be available in the Company .
• Participate in studies aimed at deriving oil production and water/gas injection rates necessary for oil production to conform to specified constraints such as limitations of gas/oil ratio, water/oil ratio and reservoir pressures by evaluating updated production/injection performance plots.
• Carry out certain studies based on the derived test results and the application of other reservoir engineering techniques (e.g. isobaric maps, isopermeability maps).
• Carry out some simulation model studies particularly using models transferred to the reservoir management section to utilize these as an effective monitoring tool.
• Conducts studies, as assigned, to predict future reservoir performance. Includes evaluating alternative allocations of production/injection wells, optimum rates of recovery per well and the entire field plans.

Generic Accountabilities

Supervision

• Plan, supervise and coordinate all activities in the assigned area to meet functional objectives.
• Train and develop the assigned staff on relevant skills to enable them to become proficient on the job and deliver the respective section objectives.

Budgets

• Provide input for preparation of the Department/ Section budgets and assist in the implementation of the approved Budget and work plans to deliver Section objectives.
• Investigate and highlight any significant variances to support effective performance and cost control.

Policies, Systems, Processes & Procedures

• Implement approved Department / Section policies, processes, systems, standards and procedures in order to support execution of the Department / Section's work programs in line with Company and International standards.
• Comply with all applicable legislation and legal regulations.

Performance Management

• Contribute to the achievement of the approved Performance Objectives for the Department / Section in line with the Company Performance framework.

Innovation and Continuous Improvement

• Design and implement new tools and techniques to improve the quality and efficiency of operational processes.
• Identify improvements in internal processes against best practices in pursuit of greater efficiency in line with ISO standards in order to define intelligent solutions for issues confronting the function.

Health, Safety, Environment (HSE) and Sustainability

• Comply with relevant HSE policies, procedures & controls and applicable legislation and sustainability guidelines in line with international standards, best practices and ADNOC Code of Practices

Generic Accountabilities (continue)

Analysis Reports

• Compare the interpreted test data with previous test results to recommend remedial measures if required and ensures the updating and maintenance of well testing data files, perforation in the Company.
• Carry out similar or related duties such as collecting all data related to well testing, production/injection and participating in defining requirements for operations such as PVT Coring, SCAL, etc.
• Participates in the preparation of PDD's Monthly reports such as Production Allocation, Injection Allocation, Well Status, and Petroleum Engineering Reports.

Internal Communications & Working Relationships

• Reports directly to Line manager, VP-Field Development and team member within Development and Division on the ongoing operation and project.
• Daily interactions with Reservoir Engineering Specialist, line manager and other team members in the department and division regarding project execution.

External Communications & Working Relationships

• Frequent contacts with OPCO staff, on joint studies or sub surface projects carried out by the OPCOs.
• Occasional contacts with consultants and contractors on projects carried out for Al Dhafra.

Minimum Qualification

Bachelors in Petroleum Engineering

Minimum Experience, Knowledge & Skills
Minimum 5 - 6 years' experience of Petroleum Engineering of which 3 years in Reservoir Engineering including computer applications

Professional Certifications

As applicable

Work Condition, Physical effort & Work Environment

Physical Effort
Minimal

Work Environment
A/C environment, could be exposed to the prevailing weather conditions like heat, humidity and dust during occasional site visits.

Additional Details

Job Family / Sub Family:Operations / Exploration & Development Operations

Carry out a variety of reservoir engineering studies, analysis and synthesis on data obtained from well test and well production / injection history, in order to devise reservoir parameters to help in understanding reservoir behaviors and ensure optimum recovery.

• Carry out detailed analysis on data obtained from well and field tests in order to define well and reservoir parameters, such as reservoir permeability, reservoir pressure, formation damage, well productivity and injectivity index.
• Participate in the preparation of reservoir tests, production logging and sampling requirements. Devise well testing design, including gauge specifications, flowing / injection period and shut-in time.
• Participates in preparation of updated development plans for the assigned field to optimize recovery and suggests remedial actions such as workovers, stimulation to improve recovery.
• Coordinates with Geology, Production and Drilling engineers and participates in drawing up drilling and completion programs for all wells and recommends to supervisor necessary workovers, coring, logging, production / injection tests,

• Provide Reservoir Engineering inputs for Delineation, Development, Appraisal & Workover Well Prognosis.
• Draws up reservoir monitoring Bar Chart and monitors well performance on daily basis through feedback information from operating divisions, compares the actual achievement against planned targets, discusses operational problems and recommends remedial actions and detects deviations.
• To be able to generate a quick economic model to predict economical outlook for any CFDP or FDP.
• Follow all relevant operational procedures and instructions

• Participate in studies designed to improve well testing interpretation methods to be available in the Company .
• Participate in studies aimed at deriving oil production and water / gas injection rates necessary for oil production to conform to specified constraints such as limitations of gas / oil ratio, water / oil ratio and reservoir pressures by evaluating updated production / injection performance plots.
• Carry out certain studies based on the derived test results and the application of other reservoir engineering techniques (e.g. isobaric maps, isopermeability maps).
• Carry out some simulation model studies particularly using models transferred to the reservoir management section to utilize these as an effective monitoring tool.
• Conducts studies, as assigned, to predict future reservoir performance. Includes evaluating alternative allocations of production / injection wells, optimum rates of recovery per well and the entire field plans.

• Plan, supervise and coordinate all activities in the assigned area to meet functional objectives.
• Train and develop the assigned staff on relevant skills to enable them to become proficient on the job and deliver the respective section objectives.

• Provide input for preparation of the Department / Section budgets and assist in the implementation of the approved Budget and work plans to deliver Section objectives.
• Investigate and highlight any significant variances to support effective performance and cost control.

• Implement approved Department / Section policies, processes, systems, standards and procedures in order to support execution of the Department / Section's work programs in line with Company and International standards.
• Comply with all applicable legislation and legal regulations.

• Contribute to the achievement of the approved Performance Objectives for the Department / Section in line with the Company Performance framework.

• Design and implement new tools and techniques to improve the quality and efficiency of operational processes.
• Identify improvements in internal processes against best practices in pursuit of greater efficiency in line with ISO standards in order to define intelligent solutions for issues confronting the function.

• Comply with relevant HSE policies, procedures & controls and applicable legislation and sustainability guidelines in line with international standards, best practices and ADNOC Code of Practices

• Compare the interpreted test data with previous test results to recommend remedial measures if required and ensures the updating and maintenance of well testing data files, perforation in the Company.
• Carry out similar or related duties such as collecting all data related to well testing, production / injection and participating in defining requirements for operations such as PVT Coring, SCAL, etc.
• Participates in the preparation of PDD's Monthly reports such as Production Allocation, Injection Allocation, Well Status, and Petroleum Engineering Reports.

• Reports directly to Line manager, VP-Field Development and team member within Development and Division on the ongoing operation and project.
• Daily interactions with Reservoir Engineering Specialist, line manager and other team members in the department and division regarding project execution.

• Frequent contacts with OPCO staff, on joint studies or sub surface projects carried out by the OPCOs.
• Occasional contacts with consultants and contractors on projects carried out for Al Dhafra.

Bachelors in Petroleum Engineering

Minimum 5 - 6 years' experience of Petroleum Engineering of which 3 years in Reservoir Engineering including computer applications

As applicable

Minimal

A / C environment, could be exposed to the prevailing weather conditions like heat, humidity and dust during occasional site visits.

Job Family / Sub Family : Operations / Exploration & Development Operations