983 Sr Engineer jobs in the United Arab Emirates

Job Description

During the tendering stage, responsible for reviewing enquiry documentation and the Scope of Work, performing pre-bid engineering, estimating man-hours, and providing inputs for bid preparation. After project award, duties include preparing, checking, and issuing Process Engineering deliverables. This includes site visits as needed and coordination with other engineering disciplines, Drafting Office, and sometimes the client's project team. Roles may include secondment as Project Engineering Coordinators, focusing on coordinating various engineering disciplines involved in the project.

• Report to H.O.D. Process and work under their supervision.
• During tendering, review client enquiry documentation, clarify scope, coordinate with other disciplines, and contribute process inputs for bid preparation. Post-award, perform related tasks.
• Develop drawings and document registers to ensure all deliverables are accounted for.
• Establish Process Design Basis based on scope, client clarifications, and site visits.
• Perform process simulation and develop Heat & Mass Balance as needed.
• Calculate equipment and instrument sizing.
• Prepare Process Flow Diagrams, P&IDs, Process Data Sheets, and other deliverables.
• Develop Operating Manuals and support commissioning and performance testing.
• Coordinate with Drafting Office for drawing checking and issuance.
• Plan safety studies such as HAZOP and HAZID, provide process input, and participate as required.
• Work closely with Project Engineers and other team members.

• B.Sc. in Chemical Engineering from a reputed institute.
• At least 6 years of experience in oil and gas plant design and engineering.
• Supervisory potential.
• Proficiency in process-engineering software like HYSIS, PIPESIM, PIPEPHASE.
• Strong skills in process calculations and use of spreadsheets.
• Understanding of all engineering disciplines.
• Knowledge of relevant engineering codes and standards.
• Excellent command of English, both written and spoken, including report writing.
• Good technical knowledge and interpersonal skills.
• Strong planning and decision-making abilities.
• Familiarity with safety studies such as HAZOP, HAZID, and SIMOPS.

Job Description PURPOSE & SCOPE:Jobs at this level are responsible for the review of enquiry documentation and the Scope of Work and for carrying out allocated duties related to the preparation, checking and issue of Engineering deliverables. This can include site visits and close liaison with the Drafting Office Coordinator.These role holders can be seconded to work as Project Engineering Coordinators based on the size and complexity of the assigned project. The focus will shift from one of deep discipline knowledge to that of coordinating the various engineering disciplines involved in assigned projects.DUTIES & RESPONSIBILITIES:
• Receives allocated duties and reviews enquiry documentation from client together with Scope of Work to understand what is required. Raises queries where there is lack of clarity. Interfaces with other disciplines to ensure integration of activities.
• Creates drawings and document register to ensure all deliverables are accountable and completed on time.
• Prepares specifications, data sheets, SLDs, Interconnection drawings etc. - SP EL, AVEVA Electrical exposure
• Carry out Power System studies, Calculations etc.
• Coordinates with the Drafting Office Co-ordinator for the checking and issuing of drawings.
• Procurement Engineering activities which includes as a minimum - Prepares the MR, carry out Technical evaluation of Bids, Bidder technical correspondences, Vendor Document reviews, FAT etc.
• Undertakes pre-engineering site surveys in order to provide input information to facilitate detailed engineering.
• Provides reports on project progress against the approved plans and budgets, bringing to notice potential problems or delays and recommends solutions.
• Prepares material take-offs for Engineering Procurement and Construction (EPC) projects.
• Provides input for the development of the Planning Package.
• Prepares man-hour estimates for Engineering deliverables at the estimation stage, for consideration in the development of the final bid.

Skills Required MINIMUM REQUIREMENTS:
• B.Sc. in Electrical Engineering.
• 6 year’s Engineering experience in the Oil & Gas industry.
• Competency in using Discipline specific software (SP EL, AVEVA Electrical, ETAP, PS CAD, etc)
• Exposure to interface with other Engineering disciplines activities.
• Competent with MS Office package.
• Good command of written and spoken English.
• Good technical knowledge and skills.
• Good Communication skills.
• Good planning & decision-making skills.

Job Description Role / PurposeJobs at this level are responsible for the review of enquiry documentation and the Scope of Work and for carrying out allocated duties related to the preparation, checking and issue of Engineering deliverables. This can include site visits and close liaison with the Design Office Coordinator.Duties and responsibility
• Perform onshore and/or offshore pipeline engineering activities (specifications, design, code checks, calculations, stress analysis, buckling analysis etc…)
• Prepare engineering reports/deliverables from the design activities, and respond to and resolve client comments/clarifications
• Ensure that all engineering work is done in accordance with applicable regulations and codes
• Assisting lead engineer in identifying, planning and scheduling engineering and design tasks required in the project
• Provide quality control checks of pipeline engineering deliverables in project scope
• Assist with project cost estimate and manpower estimates
• Provide tender support, raise technical queries, assist lead engineer on pipeline part of the technical proposal
• Prepare MTOs and PRs and other inputs to commercial proposal, and perform technical evaluation
• Review vendor documents, calculation and drawing for pipeline component (line pipe, flanges, valves, anchor flanges, hot bend etc.)
• Co-ordinate and work with drafting personnel
• Perform site surveys, prepare as-built drawings
• Train and mentor graduate engineers
• Full compliance with HSE policies and standards

Skills Required Minimum Qualifications
• Candidate shall have a bachelor's degree in civil, structural, mechanical or other engineering disciplines from an accredited program.
• Minimum 6 years of experience in onshore and/or offshore pipeline engineering
• Familiar with all relevant pipeline codes and regulations, DNV F101, API 111, ASME B31.4, B31.8 and others
• Proficient with computers in an engineering environment and experience in using pipeline design and analysis software; FE analysis skill using ABAQUS is a plus
• Familiar with industry practices and permitting requirements for pipeline design and construction
• Strong verbal and written communication skills in English
• Self-motivated, strong initiative; good planning and decision making skills

Job Description PURPOSE & SCOPE:Jobs at this level are responsible for the review of enquiry documentation and the Scope of Work and for carrying out allocated duties related to the preparation, checking and issue of Engineering deliverables. This can include site visits and close liaison with the Drafting Office Coordinator.These role holders can be seconded to work as Project Engineering Coordinators based on the size and complexity of the assigned project. The focus will shift from one of deep discipline knowledge to that of coordinating the various engineering disciplines involved in assigned projects.DUTIES & RESPONSIBILITIES:
• Receives allocated duties and reviews enquiry documentation from client together with Scope of Work to understand what is required. Raises queries where there is lack of clarity. Interfaces with other disciplines to ensure integration of activities.
• Creates drawings and document register to ensure all deliverables are accountable and completed on time.
• Prepares specifications, data sheets and undertakes calculations to meet requirements of allocated tasks.
• Coordinates with the Drafting Office Co-ordinator for the checking and issuing of drawings.
• Prepares the PR, including the Bill of Materials; specifications; datasheets/drawings; inspection test requirements; and vendor data requirements.
• Undertakes technical evaluations of vendor offers for the more complex items to ensure PR’s technical details are satisfied.
• Undertakes pre-engineering site surveys in order to provide input information to facilitate detailed engineering.
• Provides reports on project progress against the approved plans and budgets, bringing to notice potential problems or delays and recommends solutions.
• Prepares man-hour estimates for Engineering deliverables at the estimation stage, for consideration in the development of the final bid.
• Prepares material take-offs for Engineering Procurement and Construction (EPC) projects.
• Provides input for the development

Skills Required MINIMUM REQUIREMENTS:
• B.Sc. in Mechanical Engineering.
• 6 years total Engineering experience and minimum 5 years in the oil and gas industry.
• Supervisory potential.
• Good understanding of specific Engineering discipline.
• Knowledge of Engineering software in stress analysis, 3D modelling etc
• Good command of written and spoken English.
• Good technical knowledge and skills.
• Good Communication skills.
• Good planning and decision-making skills.

Job Description ROLE PURPOSE:Jobs at this level are responsible for the review of enquiry documentation and the Scope of Work and for carrying out allocated duties related to the preparation, checking and issue of Engineering deliverables. This can include site visits and close liaison with the Drafting Office Coordinator.DUTIES & RESPONSIBILITIES:? Design of onshore steel structures (including connection detailing for fabrication purpose wherever required) such as pipe racks, shelters, equipment supporting structures, access platforms, sheet piles, pipe supports? Design of concrete structures such as shallow foundations, piles, underground pits, low-rise buildings, roads, road crossings, fences, boundary walls, sewer system, pipe sleepers etc? Design of Underground Drainage system e.g., storm water, AOC system and detailing of the same? Produces civil general arrangement drawings satisfying all the design and other disciplines requirements? Produce structural, civil and underground layouts and details as per design and other discipline requirements? Preparation of civil construction scope of work (including preparation of BOQ) and performing civil bids technical evaluation? Preparation of basis of design and construction specifications? Preparation of Topographical and Geotechnical Investigation Survey SOW? Evaluation of geotechnical parameters from geotechnical investigation report and analyzing geotechnical problems? Preparation of structural steel materials requisition including technical evaluation of offers? Performing site visits and detailed surveys of existing facilities and preparation of site visit report for input to project work? Providing all necessary input to draftsmen (w.r.t. civil, structural and underground designs) and verifying drawings? Performing work to ISO requirements as well as company and client procedures? Good usage and familiarity of state-of-the-art design software’s as prescribed in Minimum requirements? Working in mu

Skills Required MINIMUM REQUIREMENTS:
• B.Sc Civil Engineering, preferably with Master degree in Civil-Structural Engineering from a well-recognized university
• Strong technical background in structural analysis and design (concrete and steel) with good knowledge of geotechnical engineering.
• 10 years of experience in design and detailing out of which minimum 6 years experience in oil and gas / industrial type structures.
• Familiar with international standards such as ACI, BS, BS-EN (Eurocode), AISC, etc.
• Conversant with STAAD-Pro, MAT-3D, Foundation-3D and other design softwares.
• Strong knowledge of state of the art softwares.
• Good supervisory skills
• Conversant with Microsoft office softwares.
• Capable of working in a state of the art engineering office for an EPC contractor where quality deliverables have to be issued in a short time.
• Good command of written and spoken English languages.

Job Description ROLE PURPOSE:Jobs at this level are responsible for the review of enquiry documentation and the Scope of Work and for carrying out allocated duties related to the preparation, checking and issue of Engineering deliverables. This can include site visits and close liaison with the Drafting Office Coordinator.DUTIES & RESPONSIBILITIES:? Design of onshore steel structures (including connection detailing for fabrication purpose wherever required) such as pipe racks, shelters, equipment supporting structures, access platforms, sheet piles, pipe supports? Design of concrete structures such as shallow foundations, piles, underground pits, low-rise buildings, roads, road crossings, fences, boundary walls, sewer system, pipe sleepers etc? Design of Underground Drainage system e.g., storm water, AOC system and detailing of the same? Produces civil general arrangement drawings satisfying all the design and other disciplines requirements? Produce structural, civil and underground layouts and details as per design and other discipline requirements? Preparation of civil construction scope of work (including preparation of BOQ) and performing civil bids technical evaluation? Preparation of basis of design and construction specifications? Preparation of Topographical and Geotechnical Investigation Survey SOW? Evaluation of geotechnical parameters from geotechnical investigation report and analyzing geotechnical problems? Preparation of structural steel materials requisition including technical evaluation of offers? Performing site visits and detailed surveys of existing facilities and preparation of site visit report for input to project work? Providing all necessary input to draftsmen (w.r.t. civil, structural and underground designs) and verifying drawings? Performing work to ISO requirements as well as company and client procedures? Good usage and familiarity of state-of-the-art design software’s as prescribed in Minimum requirements? Working in mu

Skills Required MINIMUM REQUIREMENTS:
• B.Sc Civil Engineering, preferably with Master degree in Civil-Structural Engineering from a well-recognized university
• Strong technical background in structural analysis and design (concrete and steel) with good knowledge of geotechnical engineering.
• 10 years of experience in design and detailing out of which minimum 6 years experience in oil and gas / industrial type structures.
• Familiar with international standards such as ACI, BS, BS-EN (Eurocode), AISC, etc.
• Conversant with STAAD-Pro, MAT-3D, Foundation-3D and other design softwares.
• Strong knowledge of state of the art softwares.
• Good supervisory skills
• Conversant with Microsoft office softwares.
• Capable of working in a state of the art engineering office for an EPC contractor where quality deliverables have to be issued in a short time.
• Good command of written and spoken English languages.

Job Description PURPOSE & SCOPE:Jobs at this level are responsible for the review of enquiry documentation and the Scope of Work and for carrying out allocated duties related to the preparation, checking and issue of Engineering deliverables. This can include site visits and close liaison with the Drafting Office Coordinator.These role holders can be seconded to work as Project Engineering Coordinators based on the size and complexity of the assigned project. The focus will shift from one of deep discipline knowledge to that of coordinating the various engineering disciplines involved in assigned projects.DUTIES & RESPONSIBILITIES:
• Receives allocated duties and reviews enquiry documentation from client together with Scope of Work to understand what is required. Raises queries where there is lack of clarity. Interfaces with other disciplines to ensure integration of activities.
• Creates drawings and document register to ensure all deliverables are accountable and completed on time.
• Prepares specifications, data sheets, SLDs, Interconnection drawings etc. - SP EL, AVEVA Electrical exposure
• Carry out Power System studies, Calculations etc.
• Coordinates with the Drafting Office Co-ordinator for the checking and issuing of drawings.
• Procurement Engineering activities which includes as a minimum - Prepares the MR, carry out Technical evaluation of Bids, Bidder technical correspondences, Vendor Document reviews, FAT etc.
• Undertakes pre-engineering site surveys in order to provide input information to facilitate detailed engineering.
• Provides reports on project progress against the approved plans and budgets, bringing to notice potential problems or delays and recommends solutions.
• Prepares material take-offs for Engineering Procurement and Construction (EPC) projects.
• Provides input for the development of the Planning Package.
• Prepares man-hour estimates for Engineering deliverables at the estimation stage, for consideration in the development of the final bid.

Skills Required MINIMUM REQUIREMENTS:
• B.Sc. in Electrical Engineering.
• 6 year’s Engineering experience in the Oil & Gas industry.
• Competency in using Discipline specific software (SP EL, AVEVA Electrical, ETAP, PS CAD, etc)
• Exposure to interface with other Engineering disciplines activities.
• Competent with MS Office package.
• Good command of written and spoken English.
• Good technical knowledge and skills.
• Good Communication skills.
• Good planning & decision-making skills.

Job Description PURPOSE & SCOPE:Jobs at this level are responsible for the review of enquiry documentation and the Scope of Work and for carrying out allocated duties related to the preparation, checking and issue of Engineering deliverables. This can include site visits and close liaison with the Drafting Office Coordinator.These role holders can be seconded to work as Project Engineering Coordinators based on the size and complexity of the assigned project. The focus will shift from one of deep discipline knowledge to that of coordinating the various engineering disciplines involved in assigned projects.DUTIES & RESPONSIBILITIES:
• Receives allocated duties and reviews enquiry documentation from client together with Scope of Work to understand what is required. Raises queries where there is lack of clarity. Interfaces with other disciplines to ensure integration of activities.
• Creates drawings and document register to ensure all deliverables are accountable and completed on time.
• Prepares specifications, data sheets and undertakes calculations to meet requirements of allocated tasks.
• Coordinates with the Drafting Office Co-ordinator for the checking and issuing of drawings.
• Prepares the PR, including the Bill of Materials; specifications; datasheets/drawings; inspection test requirements; and vendor data requirements.
• Undertakes technical evaluations of vendor offers for the more complex items to ensure PR’s technical details are satisfied.
• Undertakes pre-engineering site surveys in order to provide input information to facilitate detailed engineering.
• Provides reports on project progress against the approved plans and budgets, bringing to notice potential problems or delays and recommends solutions.
• Prepares man-hour estimates for Engineering deliverables at the estimation stage, for consideration in the development of the final bid.
• Prepares material take-offs for Engineering Procurement and Construction (EPC) projects.
• Provides input for the development

Skills Required MINIMUM REQUIREMENTS:
• B.Sc. in Mechanical Engineering.
• 6 years total Engineering experience and minimum 5 years in the oil and gas industry.
• Supervisory potential.
• Good understanding of specific Engineering discipline.
• Knowledge of Engineering software in stress analysis, 3D modelling etc
• Good command of written and spoken English.
• Good technical knowledge and skills.
• Good Communication skills.
• Good planning and decision-making skills.

Job Description Role / PurposeJobs at this level are responsible for the review of enquiry documentation and the Scope of Work and for carrying out allocated duties related to the preparation, checking and issue of Engineering deliverables. This can include site visits and close liaison with the Design Office Coordinator.Duties and responsibility
• Perform onshore and/or offshore pipeline engineering activities (specifications, design, code checks, calculations, stress analysis, buckling analysis etc.)
• Prepare engineering reports/deliverables from the design activities, and respond to and resolve client comments/clarifications
• Ensure that all engineering work is done in accordance with applicable regulations and codes
• Assisting lead engineer in identifying, planning and scheduling engineering and design tasks required in the project
• Provide quality control checks of pipeline engineering deliverables in project scope
• Assist with project cost estimate and manpower estimates
• Provide tender support, raise technical queries, assist lead engineer on pipeline part of the technical proposal
• Prepare MTOs and PRs and other inputs to commercial proposal, and perform technical evaluation
• Review vendor documents, calculation and drawing for pipeline component (line pipe, flanges, valves, anchor flanges, hot bend etc.)
• Co-ordinate and work with drafting personnel
• Perform site surveys, prepare as-built drawings
• Train and mentor graduate engineers
• Full compliance with HSE policies and standards

Skills Required Minimum Qualifications
• Candidate shall have a bachelor's degree in civil, structural, mechanical or other engineering disciplines from an accredited program.
• Minimum 6 years of experience in onshore and/or offshore pipeline engineering
• Familiar with all relevant pipeline codes and regulations, DNV F101, API 111, ASME B31.4, B31.8 and others
• Proficient with computers in an engineering environment and experience in using pipeline design and analysis software; FE analysis skill using ABAQUS is a plus
• Familiar with industry practices and permitting requirements for pipeline design and construction
• Strong verbal and written communication skills in English
• Self-motivated, strong initiative; good planning and decision making skills