552 Mechanical Engineer jobs in the United Arab Emirates

A reputed Engineering Consultant office in Dubai is urgently looking for a Mechanical Engineer.

Responsibilities:

1. Candidate should be a Mechanical Engineering graduate with 7+ years of working experience as a site Engineer responsible for site supervision, auditing work execution, quality checks, and records for high-rise towers and luxury villas.
2. Check materials received on site in compliance with the Contractor’s approved submissions.
3. Inspect construction works that include builder works and MEP installation as per shop drawings and project specifications.
4. Inspect testing and commissioning for all mechanical services.
5. Check non-conformity to specifications and drawings.
6. Assist and coordinate with other engineers upon the approval of shop drawings and material submittals.
7. Administer and manage all submittals & approval processes.
8. Monitor contractor’s activities on site concerning technical, authorities’ regulation, and contractual compliance.
9. Discuss with other engineers all interrelated construction functions including materials, equipment, and construction sequence.
10. Communicate directly with the contractors and client to coordinate activities on routine matters.

Requirements:

1. Candidate willing to join on an immediate basis, with 3-5 years of experience in UAE preferred.
2. Candidate having a UAE Driving License is a must.

Please send an updated CV with copies of academic degrees, memberships & registrations certificates attested by the relevant government bodies along with recent photographs.

Upload CV/Resume * Allowed Type(s): .pdf, .doc, .docx

By using this form, you agree that BD&S Middle East will receive and store your provided info.

A reputed Engineering Consultant office in Dubai is urgently looking for a Mechanical Engineer.

1. Responsible for site supervision, auditing work execution, quality checks, and maintaining records for high-rise towers and luxury villas.
2. Check materials received on site in compliance with the Contractor’s approved submissions.
3. Inspect construction works, including builder works and MEP installation, as per shop drawings and project specifications.
4. Inspect testing and commissioning for all mechanical services.
5. Check for non-conformity to specifications and drawings.
6. Assist and coordinate with other engineers upon the approval of shop drawings and material submittals.
7. Administer and manage all submittals and approval processes.
8. Monitor contractor’s activities on site concerning technical, authorities’ regulation, and contractual compliance.
9. Discuss with other engineers all interrelated construction functions, including materials, equipment, and construction sequence.
10. Communicate directly with contractors and clients to coordinate activities on routine matters.

1. Mechanical Engineering graduate with 7+ years of working experience as a site engineer.
2. Willing to join on an immediate basis; candidates with 3-5 years of experience in UAE are preferred.
3. UAE Driving License is a must.

Please send an updated CV with copies of academic degrees, memberships, and registration certificates attested by the relevant government bodies, along with recent photographs.

Upload CV/Resume * Allowed Type(s): .pdf, .doc, .docx

As the Mechanical Engineer ,you will be responsible for mechanical engineering services including complete design assistance, inspections, determination of HVAC loads, pump sizing/selection, equipment selection, duct sizing and routing, interior plumbing design and fire protection systems. You will work with a team of technicians, engineers, drafters, and surveyors to ensure customer satisfaction and timely project completion.

ESSENTIAL JOB FUNCTIONS:

• Must be capable of providing mechanical design service, including determination of HVAC loads, equipment selection, duct sizing and routing, interior plumbing design, and exterior plumbing design.
• Perform all aspects of engineering analysis and design for projects from concept stages through final design and construction management including knowledge of applicable codes and industry standards.
• Review and analyze preliminary, interim, find project plans and specifications for technical efficiency and adequacy.
• Review and analyze preliminary, interim, find project plans and specifications for technical efficiency and adequacy.
• Review and provide general monitoring on Host Nation funded project development work for new construction, renovation, and improvement projects for real property facilities.
• Interpret methods and approaches in developing project calculations, layouts, drawings, and specifications that support project objectives and standards.
• Review and provide general monitoring on conceptual studies and sketches that indicate pertinent project features, material, equipment, and specifications.
• Monitor all project phases with appropriate managers and staff elements and shall maintain current engineering data for assigned projects.
• Coordinate projects with AFCENT TSG for engineers in other disciplines, operations personnel (e.g., Electric, Power Production, HVAC, Structures, Pavements and Equipment, and Utilities shops) and other U.S. Government entities to include Wing Safety, Force Protection, Security Forces, Communications, Fire Department, and Medical Group to verify safety, constructability, operability, maintainability, and all project considerations have been addressed.
• Monitor and report on assigned projects and review specifications and schedules.
• Verify construction for design compliance and assist with resolution of differences between the U.S. and Host Nation building code.
• Efficiently use computers/computer software including Microsoft Office, computer aided design and drafting (CADD) programs (AutoCAD), and project tracking programs (Microsoft Project), GIS, and other engineering calculation software packages to solve engineering problems and facilitate work as needed.

EDUCATION & EXPERIENCE:

• Bachelor of Science degree in Mechanical Engineering.
• 4 years of experience.
• Experience providing designs, preparing drawings using AutoCAD 2012 or later.
• A licensed Mechanical Engineer preferred.
• Must be capable of traveling between ADAB TSG and AUAB TSG sites, as required, up to 4 times per year (4 working days, two travel days) to backfill and attend meetings.

LICENSE & CERTIFICATIONS:

• Licensed Mechanical Engineer (preferred).

KNOWLEDGE & SKILLS:

• Solid technical background, good organizational skills, attention to detail, quality control, client interaction and representation.
• Strong and communication skills - Excellent analytical and problem-solving skills.
• Ability to effectively collaborate with the engineering team members to and manage multiple priorities and multiple tasks simultaneously.

TRAVEL: as needed for the role

SECURITY CLEARANCE: SECRET security clearance

Intrepid Acquisition Holdings, LLC. (IAH), is a leading provider of global-scale logistics, facilities management, and advanced professional and technical services. IAH provides a broad spectrum of services and solutions to U.S. and international government agencies, and organizations. As a world-class leader in providing seasoned program management, IAH leverages and integrates its capabilities to provide safe, innovative, and reliable solutions to meet customers' diverse and complex challenges.

Intrepid Acquisition Holdings, LLC. (“IAH” and/or “Company”) and its affiliates, including but not limited to IAP World Services, Inc., Readiness Management Support L.C., JPATS Logistics Services, LLC., and subsidiaries is an EOE, including disability/vets.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

At Intrepid Global Solutions, we lead the way in mission-critical support where others can not or will not. With over 65 years of expertise supporting defense and national security missions, Intrepid Global Solutions excels in contingency operations, air traffic management, logistics, facilities management, information technology, and engineering services.

Operating across 110+ locations in 27 countries, we are renowned for navigating the most challenging environments. Certified in ISO and NIST standards, we provide reliable, mission-critical solutions to both U.S. and international government agencies, ensuring success in every global mission. Unrivaled Commitment. Global Solutions.

Qualification:

• Design and analyse rotating equipment such as turbines, compressors, pumps, motors, and fans.
• Conduct root cause analysis of mechanical failures and recommend improvements.
• Oversee the installation, commissioning, and operation of rotating equipment.
• Develop preventive and predictive maintenance programs for rotating equipment.
• Ensure compliance with international engineering standards and best practices.
• Good working knowledge in tools such as AutoCAD, ANSYS, Aspen Plus or HYSYS, SolidWorks or Inventor.

Role:

• Location: Dubai, UAE.
• Work Mode: WFH & WFO.
• Educational Qualification: B. E / B. Tech in Mechanical.
• Relocation Req: The selected candidate will be expected to relocate to Dubai and work onsite for a minimum of 2-3 years after joining the role.
• Strong understanding of mechanical engineering principles and rotating equipment design.
• Experience with design and analysis software tools.
• Knowledge of international engineering standards and best practices.
• Excellent problem-solving and analytical skills.
• Effective communication and project management skills.

Join to apply for the Mechanical Engineer role at Glow Beauty on Demand

Join to apply for the Mechanical Engineer role at Glow Beauty on Demand

• Design of mechanical systems for construction projects, including HVAC, plumbing, and fire protection systems;
• Analyzing and interpreting project specifications, drawings and construction codes to ensure compliance with important standards and regulations;
• Collaborating with project managers, architects and other engineers to ensure successful project completion;
• Coordination with subcontractors to ensure quality of works and timely delivery in accordance with project deadlines;
• Supervise and monitor site activities related to mechanical works, ensuring quality controls and compliance with safety protocols;
• Continuous inspection of mechanical systems to ensure proper functioning;
• Development and maintenance of documentation related to mechanical systems, including project specifications, drawings, and maintenance manuals;
• Providing technical guidance to other project team members and continuously contributing to the overall success of the project.
  

• Design of mechanical systems for construction projects, including HVAC, plumbing, and fire protection systems;
• Analyzing and interpreting project specifications, drawings and construction codes to ensure compliance with important standards and regulations;
• Collaborating with project managers, architects and other engineers to ensure successful project completion;
• Coordination with subcontractors to ensure quality of works and timely delivery in accordance with project deadlines;
• Supervise and monitor site activities related to mechanical works, ensuring quality controls and compliance with safety protocols;
• Continuous inspection of mechanical systems to ensure proper functioning;
• Development and maintenance of documentation related to mechanical systems, including project specifications, drawings, and maintenance manuals;
• Providing technical guidance to other project team members and continuously contributing to the overall success of the project.
  

• Good knowledge of mechanical engineering principles and modern design practices;
• Experience with AutoCAD or other design software;
• Excellent communication and interpersonal skills;
• Ability to work both independently and in a group;
• Analytical thinking and proactive approach to problem solving.
  

• A welcoming and dynamic environment where you have the opportunity and space to grow professionally;
• Involvement in challenging projects;
• Mentoring and support for your personal and professional development;
• Salary commensurate with experience and skills, as well as bonus opportunities based on performance.
  

• Seniority levelMid-Senior level

• Employment typeFull-time

• Job functionEngineering and Information Technology
• IndustriesHome Health Care Services

Referrals increase your chances of interviewing at Glow Beauty on Demand by 2x

Ajman, Ajman Emirate, United Arab Emirates 4 days ago

Dubai, Dubai, United Arab Emirates 5 hours ago

Dubai, Dubai, United Arab Emirates 19 hours ago

Dubai, Dubai, United Arab Emirates 19 hours ago

Dubai, Dubai, United Arab Emirates 19 hours ago

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

As the Mechanical Engineer ,you will be responsible for mechanical engineering services including complete design assistance, inspections, determination of HVAC loads, pump sizing/selection, equipment selection, duct sizing and routing, interior plumbing design and fire protection systems. You will work with a team of technicians, engineers, drafters, and surveyors to ensure customer satisfaction and timely project completion.

ESSENTIAL JOB FUNCTIONS:

• Must be capable of providing mechanical design service, including determination of HVAC loads, equipment selection, duct sizing and routing, interior plumbing design, and exterior plumbing design.
• Perform all aspects of engineering analysis and design for projects from concept stages through final design and construction management including knowledge of applicable codes and industry standards.
• Review and analyze preliminary, interim, find project plans and specifications for technical efficiency and adequacy.
• Review and analyze preliminary, interim, find project plans and specifications for technical efficiency and adequacy.
• Review and provide general monitoring on Host Nation funded project development work for new construction, renovation, and improvement projects for real property facilities.
• Interpret methods and approaches in developing project calculations, layouts, drawings, and specifications that support project objectives and standards.
• Review and provide general monitoring on conceptual studies and sketches that indicate pertinent project features, material, equipment, and specifications.
• Monitor all project phases with appropriate managers and staff elements and shall maintain current engineering data for assigned projects.
• Coordinate projects with AFCENT TSG for engineers in other disciplines, operations personnel (e.g., Electric, Power Production, HVAC, Structures, Pavements and Equipment, and Utilities shops) and other U.S. Government entities to include Wing Safety, Force Protection, Security Forces, Communications, Fire Department, and Medical Group to verify safety, constructability, operability, maintainability, and all project considerations have been addressed.
• Monitor and report on assigned projects and review specifications and schedules.
• Verify construction for design compliance and assist with resolution of differences between the U.S. and Host Nation building code.
• Efficiently use computers/computer software including Microsoft Office, computer aided design and drafting (CADD) programs (AutoCAD), and project tracking programs (Microsoft Project), GIS, and other engineering calculation software packages to solve engineering problems and facilitate work as needed.

EDUCATION & EXPERIENCE:

• Bachelor of Science degree in Mechanical Engineering.
• 4 years of experience.
• Experience providing designs, preparing drawings using AutoCAD 2012 or later.
• A licensed Mechanical Engineer preferred.
• Must be capable of traveling between ADAB TSG and AUAB TSG sites, as required, up to 4 times per year (4 working days, two travel days) to backfill and attend meetings.

LICENSE & CERTIFICATIONS:

• Licensed Mechanical Engineer (preferred).

KNOWLEDGE & SKILLS:

• Solid technical background, good organizational skills, attention to detail, quality control, client interaction and representation.
• Strong and communication skills - Excellent analytical and problem-solving skills.
• Ability to effectively collaborate with the engineering team members to and manage multiple priorities and multiple tasks simultaneously.

TRAVEL:as needed for the role

SECURITY CLEARANCE: SECRET security clearance

Intrepid Acquisition Holdings, LLC. (IAH), is a leading provider of global-scale logistics, facilities management, and advanced professional and technical services. IAH provides a broad spectrum of services and solutions to U.S. and international government agencies, and organizations. As a world-class leader in providing seasoned program management, IAH leverages and integrates its capabilities to provide safe, innovative, and reliable solutions to meet customers' diverse and complex challenges.

Intrepid Acquisition Holdings, LLC. (“IAH” and/or “Company”) and its affiliates, including but not limited to IAP World Services, Inc., Readiness Management Support L.C., JPATS Logistics Services, LLC., and subsidiaries is an EOE, including disability/vets.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

At Intrepid Global Solutions, we lead the way in mission-critical support where others can not or will not. With over 65 years of expertise supporting defense and national security missions, Intrepid Global Solutions excels in contingency operations, air traffic management, logistics, facilities management, information technology, and engineering services.

Operating across 110+ locations in 27 countries, we are renowned for navigating the most challenging environments. Certified in ISO and NIST standards, we provide reliable, mission-critical solutions to both U.S. and international government agencies, ensuring success in every global mission. Unrivaled Commitment. Global Solutions.

Job Responsibilities:

• Plan and oversee the testing and commissioning of mechanical systems and equipment ensuring they meet project specifications and performance standards.
• Develop and implement detailed commissioning plans, procedures, and schedules in coordination with project teams.
• Conduct functional and performance tests on mechanical systems including HVAC, plumbing, and fire protection systems.
• Identify and resolve issues during the commissioning process ensuring optimal system performance and efficiency.
• Collaborate with design, construction, and operations teams to ensure seamless integration and handover of mechanical systems.
• Prepare detailed commissioning reports documenting test results, system performance, and any corrective actions taken.
• Ensure compliance with health, safety, and environmental standards during commissioning activities.
• Participate in project meetings providing updates on commissioning progress and addressing any challenges encountered.
• Provide training and handover documentation to operations and maintenance personnel.
• Support the project closeout process ensuring all commissioning documentation is complete and accurate.

Key Qualifications:

• Bachelor's degree in Mechanical Engineering or a related field.
• Minimum of 5 years of experience as a Testing and Commissioning Mechanical Engineer, preferably in the construction or industrial sectors.
• Strong knowledge of mechanical systems testing procedures and commissioning standards.
• Proficiency in using testing and diagnostic tools for mechanical systems.
• Excellent problem-solving and analytical skills with a focus on detail and accuracy.
• Strong communication and coordination abilities with the capacity to work effectively in a team environment.
• Familiarity with relevant industry standards and regulations.
• Candidates currently residing in the UAE will only be considered.
• Must be available for immediate joining.

Company Description
Waagner Biro Bridge Services is a leader in delivering high-quality projects in bridge construction, steel structures, and marine engineering. Known for iconic and technically advanced structures, we also provide design and build solutions for harbors, marinas, and jetties.

Company Description
Waagner Biro Bridge Services is a leader in delivering high-quality projects in bridge construction, steel structures, and marine engineering. Known for iconic and technically advanced structures, we also provide design and build solutions for harbors, marinas, and jetties.
Our comprehensive facility management services cover bridges, road infrastructure, buildings, and aviation facilities, ensuring long-term performance and excellence. At Waagner Biro, we are committed to achieving the extraordinary in every project.
Learn more: Description
A Mechanical Engineer is responsible for overseeing the day-to-day operations on site, ensuring that projects are completed on time, within budget, and to the specified quality standards. This role involves coordinating with various stakeholders, managing resources, and ensuring compliance with safety regulations.

• Site Management:
• Supervise and monitor site activities to ensure they align with project plans and schedules.
• Coordinate with subcontractors, suppliers, and other project team members.
• Quality Control:
• Ensure all work is carried out to the required quality standards.
• Conduct regular inspections and testing of materials and workmanship.
• Maintain accurate records of site activities, inspections, and tests.
• Health and Safety:
• Enforce safety protocols and ensure compliance with health and safety regulations.
• Conduct regular site safety audits and address any issues promptly.
• Provide safety briefings and training to site workers.
• Technical Support:
• Interpret and execute engineering plans, drawings, and specifications.
• Provide technical guidance and support to the site team.
• Assist in the preparation of technical reports and documentation.
• Resource Management:
• Manage site resources, including labor, materials, and equipment.
• Ensure efficient use of resources to minimize waste and control costs.
• Coordinate deliveries and ensure materials are available as needed.
• Communication:
• Maintain effective communication with the project manager, client, and other stakeholders.
• Prepare and present progress reports to senior management and clients.
• Address and resolve any issues or conflicts that arise during the project.
  

• Bachelors of Mechanical Engineering
• A minimum of 5 + years of experience
• A valid UAE Driving License
  

• Seniority levelMid-Senior level

• Employment typeFull-time

• Job functionQuality Assurance
• IndustriesCivil Engineering

Referrals increase your chances of interviewing at Egis by 2x

Get notified about new Mechanical Engineer jobs in Dubai, Dubai, United Arab Emirates.

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

The Mechanical Engineer will assist the Project Manager and the Resident Engineer in managing the operational functions of daily activities on the project. The Mechanical Engineer will participate in reviewing and approving all contractor submittals, with a focus on quality assurance during the engineering phase of construction.

Under the supervision of the project resident engineer or MEP lead, the engineer performs routine inspection and monitoring tasks to ensure proper construction supervision. They inspect various aspects of work on-site and continuously oversee construction activities to ensure compliance with all applicable codes, standards, and specifications. They document nonconformances and participate in determining appropriate resolutions.

• Assist the Resident Engineer or MEP Lead in performing contractual duties on site.
• Provide solutions for technical engineering problems within the assigned discipline(s) and coordinate their application to ensure progress.
• Advise the project manager on any technical aspects of the mechanical services that may impact construction progress and quality.
• Review the contractor's construction schedule during project execution.
• Review construction submittals from inception to closeout, including installation method statements, shop drawings, material proposals, and subcontractor proposals, ensuring compliance with design intent and technical requirements.
• Monitor material procurement and deliveries to support construction schedules.
• Conduct site inspections to verify adherence to approved drawings, specifications, safety, and schedule.
• Perform offsite inspections of equipment and materials as necessary.
• Review and witness testing and commissioning of mechanical systems, including pressure tests and leakage tests.
• Prepare defect lists and oversee remedial actions during snagging and final inspections.
• Attend progress and technical meetings related to mechanical services.
• Draft site and engineer instructions for building mechanical services.
• Advise on variation costs claimed by contractors.
• Review contractors' Operation and Maintenance manuals.
• Oversee junior engineers and inspectors to ensure compliance with quality standards and contractual obligations.
• Coordinate with utility authorities for connections as required.
• Ensure project quality control procedures are followed and seek continuous improvement.
• Collaborate to eliminate hazards and ensure safety and environmental standards.
• Interpret design drawings and specifications to ensure correct technical execution.
• Support with inspection requests and other responsibilities as needed.

• Degree in Mechanical Engineering or equivalent.
• Minimum of 10 years postgraduate experience, with at least 7 years on large projects.
• Regional experience is preferred.
• Authority registration is preferred.
• Ability to manage and coordinate a team of moderate size and complexity.
• UAE Driving License.

Interested? Apply now.